Connecting your tablet to the Internet - which method is better to choose? Connecting the tablet to the Internet: all possible ways How to connect the tablet to the Internet

Below we will talk about connecting the tablet to the Internet via Wi-Fi, via 3G (for which you will definitely need a SIM card with 3G or a device with it) and a 3G/Wi-Fi modem, a USB network card and more sophisticated methods from the Internet series to the tablet via laptop via USB. We hope that the above is useful to you!

Wi-Fi router

When purchasing a tablet, we recommend that you immediately acquire a Wi-Fi router (we hope there is no need to talk about the obvious – the need to have the Internet at home). You can buy one in almost every electronics store, and in computer markets it is generally a must-have item for sale. As for the cost, an inexpensive router will cost about 1200-1500 rubles. But save on network equipment We wouldn't recommend it to you. Not all routers are the same, and much will depend on the cost of the device: cheap routers can overheat, freeze, and randomly reboot - such malfunctions should not occur in high-quality, and therefore more expensive, equipment.

Moreover, almost main problem Cheap routers have a “cut off” speed. Let's say your tariff plan states 50 Mb/s for downloading and uploading, but a weak router will be able to provide, at best, about 32 and 16 Mb/s. Also, of course, a lot, but you didn’t pay for 32 MB, and especially not for 16 MB, but for all 50. And then there’s no point in blaming the provider in vain. Maybe it’s not the problem at all, but the stuffing of the router, which is simply incapable of more.

Small coverage area is another problem of a weak router. In addition to data processing speed, it should be of no less interest to you. This parameter will determine whether Wi-Fi will reach all rooms of the apartment or, to exaggerate, will only work within the one in which the router is installed. In an open space, the router can distribute Wi-Fi within a 100-meter zone, but with an apartment everything is much more complicated: walls, partitions, doors and other obstacles significantly reduce the coverage area. So for a two-room apartment, a router for 1,200 rubles may not be enough.

The quality of the signal and its range will depend on the number of external antennas. In short, the more of them, the better: each of the antennas can be directed, thereby improving the signal quality in a particular room. But these are already details.

Alternatively, these could be ASUS RT-N66U or TP-LINK TL-WDR4300 routers, both with three antennas, cost from 3,200 rubles.

So, you bought a router, brought it home, and what next? With routers of the mid-price category and above, everything is now generally simple: to connect such a router to a computer you do not need any special skills - everything necessary for this is included in the package - we just follow the instructions given in the instructions.

Now: the tablet is in your hands, turn on Wi-Fi in the “Settings” menu – “Wireless connections and networks” for Android tablets, tap on the icon on the screen – “Wireless connections” for Windows tablets and “Options” – “Wi- Fi" for iOS devices.

The system will automatically detect all available Wi-Fi connections. All you have to do is select your newly connected and configured Wi-Fi from the list of suggested ones and click “Connect”. Enter the password and enjoy!

This, in our opinion, is the simplest and most correct way to use the Internet with an Internet tablet at home or in the office.

In addition, Wi-Fi connections are now available in most cafes and restaurants, access points are also organized in shopping and entertainment centers, and in some cities Wi-Fi can be found even in parks and other public places.

About the cost of using the Internet via Wi-Fi. Let's start from scratch: Wi-Fi can be either free (thanks to unwary neighbors! or, say, thanks to open networks in public catering establishments) or require some kind of fee. If we talk about home Internet, we pay strictly according to the tariff plan, as before: connecting a router will in no way change the price. But some very enterprising citizens demanded money for the password to Wi-Fi in public places. So, let’s say, we have more than once encountered Wi-Fi in “Waiting Rooms” at railway stations, the password for which cost from 30 rubles/hour. In this case, a tariff would be charged for the use of sockets. And, yes, also strictly according to the charging time of the laptop/tablet/phone.

Mobile Internet

If you do not have the opportunity to create or connect to Wi-Fi, you can resort to using the mobile Internet. And there are at least 5 options for organizing the connection.

First: tablet with support 3G

If every tablet probably has a Wi-Fi module, then the presence of a 3G module is an option for which you will have to pay a lot.

What is 3G? This is technology mobile communications 3rd generation, one of which is high-speed mobile access to Internet services. To connect to 3G networks, your tablet must have a built-in module. In addition to this, you will need a SIM card mobile operator, providing 3G connection service.

Note that 3G is more expensive than home Internet and often has limited traffic, i.e. You will be able to download from and upload to sites a strictly limited amount of information; everything that is above the norm will be paid at a separate rate.

Therefore, we recommend that you familiarize yourself with the tariff plans of each mobile operator and only then buy a card. In addition, pay attention to the coverage area of ​​3G networks of a particular operator. 3G is far from ubiquitous networks, but you can safely use them within the perimeter of large cities.

In addition to 3G, there are also LTE networks - more modern and faster networks for wireless transmission data. However, LTE tablets, firstly, are not cheap, and secondly, the technology itself is still poorly distributed in our country, so for now it makes sense to talk only about 3G networks and connecting to them.

We chose an operator and a tariff plan, purchased a SIM card, and placed it in the appropriate slot in the tablet. And that's really all. You don’t need to create any passwords, make additional settings, or anything else. The only thing is that to save battery power and, in fact, mobile traffic, it is better to deactivate the 3G connection in the same “Settings” menu and not use it unless necessary.

By the way, the presence of a SIM card in your tablet means not only the ability to connect to the Internet anywhere at any time, but also the ability to make calls using standard mobile communication technologies, thereby turning ordinary Internet tablets into so-called “tablet phones”.

Among the brightest representatives of the “genre” we can name Apple iPad Air Wi-Fi+LTE costing from 25 thousand rubles, and Samsung Galaxy Tab 3 3G costing from 12 thousand, and ASUS Google Nexus 7 LTE priced from 13.5 thousand rubles for a model with 32 GB of internal memory manufactured in 2013.

Remember, we said above that the presence of a 3G/4G/LTE module significantly affects the price of the product? So: still the same Apple iPad Air Wi-Fi with the same 32 GB of internal memory will cost 22 thousand instead of 25 thousand for the model with LTE; Samsung Galaxy Tab 3 by 16 GB costs 9 thousand, and Google Nexus 7 2013 without the corresponding module costs 10.3 thousand rubles. That is, on average, a 3G module costs 3 thousand rubles. Remember this number, it will be useful to you later.

Second:3G modem

With a 3G modem, things are the same as in the previous paragraph: we select a tariff plan, buy a SIM card and, in fact, the modem itself, connect the modem to the tablet using a regular OTG cable. This is, if you like, a slightly enlarged analogue of what could be built into your tablet.

How much does this whole idea cost? It depends how lucky you are. Some mobile operators, to popularize their products and services, sometimes organize auctions of unprecedented generosity, offering to connect to 3G Internet for a month or more by purchasing a modem “for only 1 ruble!” or something similar.

In the world, a modem from an operator costs from 400 rubles, and taking into account advance payments, monthly tariff fees and other associated expenses, the amount increases to 1200-1500 rubles. Yes, this is not 3 thousand, but only one and a half, but the 3G modem will hang on the adapter, which is not always convenient. Although, if you think about it, a flash drive with mobile Internet can be used on other devices - a laptop, for example, or even a computer. It's up to you, in a word.

Reservation: to connect a USB modem, reading drivers must first be installed on the tablet of this device. Plus, the modem must be switched to the “Modem Only” state. This can be done using a home PC via a hyperterminal. The procedure is reversible, so “Autostart” and all other delights can then be returned.

Third:3G/Wi-Fi router

This is also a portable device with a SIM card, but it operates on a slightly different principle. The modem with SIM card accepts 3G, and the Internet is distributed via Wi-Fi. This device is convenient to use when you don’t want to carry around with a modem hanging on an adapter, or you need to connect not one, but several devices to 3G at the same time.

Such a router, depending on its size, can be used both at home and taken with you on trips. Plus, if the signal reception is poor, you can place the router higher and further away, and receive the Internet where it is more convenient for you.

The cost of the device is from 1,600 rubles (for example, a Huawei E355 flash drive 3G modem with the function Wi-Fi router). Routers that are more “strong” in terms of hardware and signal transmission quality cost more than 2.5 thousand (for example, the standalone Huawei E586 3G/Wi-Fi router). Although, if you buy it as a set - 3G/Wi-Fi router + operator SIM card - the purchase may cost less: about 2 thousand rubles.


By the way, such a router has a battery, so you can definitely do without wires and restrictions for at least 4-5 hours (working time in data transfer mode, and in standby mode these can last up to 280 hours). The only thing you will need to connect the tablet is to turn on Wi-Fi in “Settings” and enter the Wi-Fi password, if one is set on the modem.

Fourth: 3 G byWi-Fi via smartphone onOSAndroid

If you have 3G on your smartphone, the Internet can be distributed via Wi-Fi to and through the tablet. How? The algorithm is simple: in the “Settings” of the smartphone we find “Wireless networks”, and in it - the item “Modem mode” - “Point Wi-Fi access" By activating this item, you can also set a password for Wi-Fi access.

The rest follows the standard scheme: turn on Wi-Fi on the tablet, enter the password and use it.

If the “Data transfer” item for connecting to 3G on your smartphone was deactivated, you will need to enable it accordingly (thanks, cap!).

This type of connection is very power-hungry and the smartphone will most likely be the first to go down, because in addition to pumping data through one channel, it will simultaneously distribute it through another. So you can use it for a very short time or only in the area of ​​access to an outlet.

This is a temporary rather than permanent way to connect your tablet to the Internet.

By the way, you can distribute the Internet through a tablet by switching it to router mode. You never know, maybe you have two tablets at hand at once: one with 3G, and the other with Wi-Fi.

Fifth: Internet viaBluetooth

This method is suitable in the case when your phone is connected to the mobile Internet, no matter what type (namely, a phone - a colored “nut cracker” without any smart functions), but you urgently need to check your email, edit a file or send any data from tablet into the unknown, but there is no Wi-Fi at hand.

However, to organize such an “emergency” connection, your phone must support DUN (Dial-up Networking) technology. Even the ancient Nokia clamshell from 2007 has this, so we think that the likelihood of DUN support in more modern phones is high.

The tablet should also be ready for this type of connection. An application like Dial-up Net is required.

Bluetooth must be turned on on both devices. It is not a fact that you will be able to establish an Internet connection on your tablet this way the first time, or even connect via your phone via Bluetooth in general. Either the programs crash, or “the connection is established,” but the Internet does not appear on the tablet. But, you never know, maybe the stars will align and you will be incredibly lucky!

Internet on a tablet via patchcord

Above, we complained that a 3G modem hanging on an OTG cable is somehow completely a thing of the past. But this is nothing compared to a tablet connected to home Internet by connecting the patchcore and the tablet via a USB network card.

Firstly, the presence of such a network connection in every home is a big misconception, and secondly, the entire portability of a tablet with such a connection is reduced to a minimum. Anyway. That's not what we're talking about.

Network USB card costs from 430 rubles (for example, Edimax EU-4208). We won’t say that every city electric market sells these, but if necessary, you can order it on the Internet.


Everything here is also simple: we connect, establish a connection, and work.

There is, however, one thing: your home router must be configured to automatic detection IP addresses of devices connected to it. Only in this case will you be able to access the Internet via cable.

PC or laptop

There are at least a dozen ways to access the Internet from a tablet via a computer. But none of them can be called simple.

So, for example, to connect the Internet on a tablet via a computer, at a minimum, you will need to get root rights on the tablet (administrator rights) and install the appropriate software on your computer or laptop. After launching the program on your PC, connect the tablet to it via USB and enable “Debug Mode”. Now we are talking only about Android tablets.

The program will prompt you to use one of the DNS servers to connect. All you have to do is choose the right one. Confirmation of the program launch and synchronization of the process with the tablet analogue this application must be displayed on the “tablet”.

And that's basically all. If the connection fails, try logging in on your tablet using your IP address. Maybe it will help.

Instead of conclusions

We consider a regular Wi-Fi connection to be the most profitable both in terms of money, comfort during use, and battery life of a tablet with the Internet turned on. Behind it in the queue we will identify 3G/Wi-Fi modems and tablet models with a built-in 3G module (if only because such Internet is a. more expensive than usual, and b. a 3G connection drains the battery too quickly).

And even with a built-in 3G module, you cannot replace it with 4G, and, therefore, the speed of working with the Internet cannot be increased. Moreover, the 3G model of the tablet both weighs and costs more.

Other methods described in this article are rather emergency, and cannot be considered as options for permanently connecting a tablet to the Internet due to the need for a wired connection, installation of additional software and the presence of additional devices such as adapters and network cards USB.

The following two tabs change content below.

Elizabeth

Without a twinge of conscience, I ask for “phone numbers” from guys and girls I don’t know well. To check whether the lock button fits comfortably under your finger and whether the autofocus works quickly :) I would like to visit MWC and conduct a live blog from the thick of things.

The tablet is the last word in modern multimedia technology. This compact and ultra-thin device combines almost all the capabilities that today's bulky processor or laptop can present, which is considered as large as a PC compared to other new compact devices. Today's tablet allows you to play games or view photos, and, most importantly, it provides Internet access to communicate with friends online. in social networks or for a variety of very useful things that include studying, broadening your horizons, improving your skills and other opportunities.

Most people, when purchasing a tablet, first of all dream of using it to surf the Internet. Therefore, the question becomes relevant for all inexperienced users. Get the answer to this question in the form universal instructions impossible, since there are different tablets and they have different appearance, technical characteristics and operating systems. Exactly from operating system, your tablet depends on the options for connecting it to the Internet.

Before connecting to the Internet, make a choice which Internet option suits you best. Three network access options are popular today.

It is possible to connect via a standard network cable, but please note that tablets have a LAN connector installed extremely rarely. In addition, Wi-Fi routers are placed in houses and apartments; they receive a signal via a network cable, which then distributes the signal in the form of wireless Internet.

It is possible to connect to the Internet via a mobile network using 3G or 4G technologies, and you can use the Internet via a built-in or external 3G modem. In this kind of modems, a SIM card is installed, as in regular ones. mobile phones. The choice of connecting to the Internet via a tablet is made by you taking into account the capabilities of your tablet.

Connecting Wi-Fi is quite simple. To do this, check the box next to “wireless Internet connection” in the network settings. After this, the tablet itself will detect all active networks within its available reception radius; all you have to do is select the network with the best signal. However, remember that not all networks are open and free. Connecting to some of them is impossible without an access password.

If the tablet has a built-in modem, then the question is how to connect your tablet to the internet It's easy to solve. You just need to insert the SIM card into the desired slot and configure the connection in accordance with the parameters specified on the SIM card. Often in the settings it is necessary to tick the “Data transfer on the network” option for the Internet to work correctly.

Connecting to the network using an external modem is a more complex process. First, make sure that you can connect an external modem to your tablet model. A standard USB port is usually used for connection. The most difficult thing about this connection is getting your modem to function for its intended purpose, and not as a virtual disk or a card reader, because this modem performs these functions by default. After the modem is working for its intended purpose, you should enter the APN settings and enter the details of your network operator.

In the future, having saved information about the access location, your tablet will automatically connect to the Internet when you connect an external modem. Without the Internet on your tablet, it is impossible to fully appreciate the benefits of this multimedia device. However for normal operation, you need to configure the tablet.

If you want to know: " how to set up internet on a tablet?”, perform the following manipulations one after another. Open the “Settings” menu and select the “Wireless Networks” section. Then go to the section " Mobile network" and select the sub-item "APN access point", the next step is to create a new access point. This process begins by clicking the Function, New Access Point button. The complexity of setting the parameters depends on the provider you choose. First, you need to provide the name of the connection, its address, as well as the proxy server address, connection port, user name and password. Addresses of providers can be found on the Internet. Owners of wonder media wm8650 tablets should definitely choose a provider who can provide services that match their prices and suit you. Detailed instructions on how to set up the Internet on a tablet can be obtained by watching a video on this topic; there are many of them on the Internet.

The tablet settings also include installing Skype. To do this, go to Google Play and enter “Skype” into the search engine. After that, go to the Skype application page. Here you click on “install” and often find that the Skype application is incompatible with your device. If this happens, then download and install the apk file and enjoy it to your health.

It should be said that for most devices the only possible way to connect to the Internet is Wi-Fi connection. Wondering how to install internet on tablet, it is worth looking for information on this topic on the Internet itself. Start by going to settings on your tablet and turning on Wi-Fi. The tablet programs themselves will search for access points - places of Internet connection and a list of names will appear on the screen.

Click on the selected connection name, enter the password if the system requires it, and you can use the network. Nowadays, an access point can be found in many cafes, restaurants, hotels, bus stations and other public places. At home it is created using a router. A router is a device that is located close to supporting Wi-Fi devices and provides them with Internet access.

The range of standard access points is small and ranges from one hundred to two hundred meters. There is a misconception that it is impossible to connect to the network anywhere you need via Wi-Fi, but this is not true. To connect to the Internet anywhere, there are 3G modems. Outwardly, they look like a flash drive and are purchased from mobile operators. True, the 3G coverage area in our country is not particularly large, which means that if you go out into the country, you most often will not be able to use the Internet. However, even for such cases they found a way out. We will tell you how to install Internet on your tablet in such a situation. The latest generation of smartphones can “turn” into Internet access points with just one tap on the screen. Now you know that if in the place where you are there is a regular 2G cellular connection, then you will be able to access the Internet and surf it.

Connecting the Internet to a tablet is probably the first thing every owner of a mobile device thinks about when he picks it up. Today, the Internet is needed not only for communication: for a long time, many programs, in addition to instant messengers and mail, and even some games require constant connection to the Internet.

Choose best internet for a tablet, you can based on the specific conditions in which you are going to use it. For example, for those who use the device only at home, and for people who are actively on the move and constantly in touch, different connection options will be optimal.

There are several ways to connect your tablet to the Internet. The choice will depend on your device configuration, the availability of additional equipment, and in some cases, your geographic location.

Wi-Fi connection

This is an option for home connection: if wired Internet is installed in your house or apartment, mobile devices can be connected via a Wi-Fi router. To do this you need:

  • enable Wi-Fi in the tablet settings;
  • run a search for networks and find the one you need (usually it is first in the list, as it provides the strongest signal);
  • Enter the security key if the network is encrypted.


After this, your device will have access to the network, and you can use it both for communication and for watching videos, sharing photos, reading news and many other tasks.

The same technology can be used in various public spaces: now many cafes, restaurants, educational or entertainment institutions organize free access for users and visitors.

Connecting a tablet via a computer

If you do not have a Wi-Fi router, but your computer connects to world wide web directly (via fiber, twisted pair, ADSL or 3G), you can use its Wi-Fi module as a router. To provide mobile devices with an Internet connection via a computer, you need to create an access point on it using regular funds Windows OS (available in version 7 and higher) or using a third-party program.


IN Windows system you will need to go to the “Network and Sharing Center”, select “Settings” wireless network computer - computer" and then set the network parameters, following the system prompts.

The second option will seem simpler to many, since it does not require complex manipulations. It is enough to download and install the program (for example, “Connectify”), in its settings, set the encryption type and network security key. After this, you can connect with mobile devices according to the scheme described in the previous paragraph.

Mobile networks

3G and LTE technologies are quite widely developed today and can easily compete with wired connections in terms of speed. Mobile Internet is a good way for those who are thinking about how to set up the Internet on a tablet if there is no constant access to Wi-Fi.


Almost all tablet models are now equipped with radio modules for SIM cards for making calls, sending SMS and, of course, accessing the network. Study the tariffs of your operator and connect the one that suits you, taking into account the planned volume of traffic and/or time of use.

Settings from the operator usually come automatically after installing the card; all you have to do is enable data transfer in the tablet settings. If this does not happen, contact your operator and find out the access point settings for manual configuration.

Some users, having a device with two SIM card slots, use one of them for calls, and install the second SIM card only for the Internet - if the second operator offers more favorable tariff than the first one.

But how to connect the Internet to a tablet if it does not allow for the installation of a SIM card? In this case, a 3G modem will help. It allows you to establish an Internet connection on devices that are not equipped with SIM card slots: computers, laptops and tablets without a radio module.

The 3G modem is connected to the tablet via an OTG cable - a special short cable for communicating with third-party devices via USB. When connected, it will be recognized as a SIM card, that is, your further actions will be similar to the previous point: enable data transfer, and if the settings did not come automatically, then create and configure the connection point manually according to the operator.

Connection via smartphone

AND last method, which echoes all of the above: an active Wi-Fi access point can be created on a smartphone. When receiving mobile Internet via a 3G network, most smartphones have the function of creating Wi-Fi points, which is also called "Hotspot".


Enable the “Hotspot” or “Modem Mode” function (the name depends on the device model) in the smartphone settings and run a search on your gadget Wi-Fi networks. After finding the desired network, enter the security key (it will be visible on the smartphone when setting up the point) and connect.

Once you figure out how to turn on the Internet on your mobile device, you don’t have to worry about this question anymore: the once-made setup will be saved, and further connections will be made automatically. All you have to do is turn on the tablet and use it the necessary programs and your favorite games without restrictions.

Video instructions for setting up the Internet on a tablet

You will learn how to set up the Internet on your tablet, as well as how to connect your tablet to the Internet, from this article. It describes the most popular methods of connecting to the Internet. With links to . Do not hesitate to ask questions if something is not clear, I will help in any way I can.

3G connection

Simple too. The same principle works as in phones. You insert the SIM card into the tablet, and it will figure out what to do with it (in some cases, the SIM card must be activated). Turn on Data transfer in the settings and the Internet pick up. Some mobile operators send SMS with Internet settings. Problems are resolved with the operator himself. And as a rule, all settings and instructions can be found on your operator’s website, and they all boil down to one thing - you need to register an access point. For example like this:

  • APN (access point): internet.life.com.by
  • Name: empty
  • Password: empty

This is done for Android 4.* in the settings, settings block WIRELESS NETWORK, tab More.


Settings - "More" tab

There you select the item Mobile network.


"Mobile network" item in the tablet settings


Connection using a 3G modem

In short, you have to disable PIN code entry on the modem and create an access point with the parameters of your mobile operator. And you may need to get it.


Connecting to the Internet using a computer via USB

Due to the fairly large amount of material on this connection method, I decided to move it to a separate article on the site, which is called that way. I warn you that the method is quite complicated, especially for beginners. And it requires the installation of additional programs on the tablet and computer. Root rights are also required.



Internet connection via Ethernet

Exotic way. Used if you need the fastest Internet on your tablet. To make this connection you will need a USB – RJ45 adapter and drivers. You will have to look for drivers for your tablet yourself, I can only tell you where you can download USB drivers to Ethernet for Asus Eee Pad Transformer. Copy the zip archive to the device memory and install it in Recovery mode. In a terminal emulator, enter the commands

su
usb_ethernet

Connect the adapter and Ethernet cable to the tablet. Since Android itself does not have support of this type connections, turn on Wi-Fi.



Video about all the ways to connect your tablet to the Internet.

To start using the Internet on your tablet, you just need to insert a SIM card from your mobile operator, or have an available Wi-Fi connection nearby. Setting up the Internet and debugging all the options is not at all difficult, following the instructions in this article. Please note that when you insert the SIM card into the device, it should reboot. If the tablet does not do this, perform a restart yourself.

How to set up mobile Internet on a tablet

To access traffic from a SIM card, make sure that you have activated the appropriate tariff from your telecom operator or purchased a package unlimited internet. Otherwise, you will be charged according to the terms of the current tariff, the cost of non-specialized Internet tariff plans data transfer costs are usually very high.

  • go to the tablet settings through the tray. To do this, simply drag the screen with your finger from top to bottom and click the gear in the upper right corner of the tray;
  • The tablet settings will open in front of you, find the line “Data Usage” and click on it;
  • check the box next to the words “Mobile data”;


  • For detailed settings, click immediately on the three lines in the upper right corner. You will see several fields: “Data in roaming” will block Internet traffic from the SIM card if you are outside your home region, because the service plan will increase without specially connected options from the operator; “Limit background data” will allow you to set a limit on traffic usage. For example, you have a tariff connected that provides an unlimited Internet option of 3 GB for a month. You set a limit of 3 GB through this line and your traffic will not exceed this limit, thus you will save money. The remaining criteria do not directly affect your mobile data transfer, these are only additional options;


  • go to the “Advanced Settings” tab in the list on the left. Click on the line “Mobile networks”;


  • here you can configure your network in more detail if something goes wrong and it gets lost. Go to the “Network Mode” tab;


  • Place a dot next to “GSM/WCDMA (automatic)”. This will allow the device to switch between network types on its own, depending on the situation;


  • return to the menu and click on “Network Operators”, only if your operator is identified incorrectly. Click on the words “Search for networks” in the drop-down window;
  • wait a few seconds to search;


  • under the top two lines you will see all the operators that were found in this region. If you haven’t found yours, then perhaps your operator’s mobile towers simply aren’t in your location area.

After all the manipulations, your mobile data should work without interruption. If you still can't configure mobile transmission data, contact your operator to obtain Internet settings, save the configuration on your tablet, and then perform this algorithm.


How to set up Wi-Fi Internet on a tablet

If there are available Wi-Fi networks near you or you know the password for any of them, then you can very quickly set up a connection via a wireless network:

  • go back to the settings of your device, click on the Wi Fi tab;


  • drag the slider until it turns green;
  • in the field on the right you will see all the Wi-Fi networks that are nearby; if the lock next to the network is lit, this means that it has a password;


  • click on the network for which you have the desired password and enter it in the window that appears;
  • click "Connect";


  • You are now connected to the Wi-Fi wireless Internet network.


Sometimes, serious problems may arise with the drivers of this network if the Bluetooth / Wi-Fi adapter chip is damaged, or if there are failures in the device’s firmware. Then you will have to flash the tablet yourself or contact a service center.

Thanks to tablets, people have quick access to their documents, photos and other materials in a format convenient for them. In many cases, using this gadget is much more practical than carrying a laptop with you, and even more so than using home computer. However, it is worth noting that the lack of Internet largely limits functionality devices.

Connecting the tablet to the global network

Let's consider all the available options for connecting modern tablets to the Internet. Depending on the selected model, the connection to the network is carried out using a built-in mobile module; they use the mobile operator’s networks. In addition, there is wireless connection via Wi-Fi, but you will need a router for this. And finally, using an external modem or Bluetooth transmission.

How to set up Internet on a tablet using a SIM card

Depending on the tablet model, it may be equipped with a mobile Internet module. Thanks to this technology, you can use a purchased SIM card from a telecom operator to gain access to the global network. The complexity of this method lies in the setup process. It is this stage that scares off a large number of unprepared users. On smartphones, this stage is simplified due to the fact that the operator sends a message with an automatic configuration algorithm.

Tablet with SIM

When connecting via SIM card, some problems may occur. The main cause of problems with such a connection is primarily incorrect work the card itself. You need to make sure that the Internet is really connected and paid for; you can find out from your operator. Next, you need to make sure that the SIM card is installed correctly. After installing the card, you should restart the device.

The main advantage of such a connection will be its universal availability, since the mobile network is now widespread even in the farthest corners. The disadvantage of this method will be the cost of the Internet and limited traffic. Mobile operators often set quite expensive tariffs, especially for 3G or 4G standards.

How to connect the Internet on a tablet using Wi-Fi

Devices that do not have a SIM card slot usually have a Wi-Fi module. In general, most modern tablets have it, and connecting to the Internet via Wi-Fi is the most popular way to provide unlimited Internet for a tablet.

If used home network, then it is best to install the router as close as possible to the place where the tablet will be most often used (to minimize the distance from the router to improve signal quality). It is advisable to avoid the presence of partitions between the device and the router.

Connect via Wi-Fi and mobile networks

In most devices, the Wi-Fi module is turned on in the “curtain” by clicking on the corresponding icon. You can turn on Wi-Fi in a more complicated way: you need to find the settings, select the “Wireless networks” item in them, find the “Wi-Fi” item and activate it.

To connect to a specific network, you need to select the network with the desired name in the list and click on it. They can be open (have no protection, you can freely connect to them) and closed (password protected). To connect to an open network, just click on its name and the device will automatically connect to it. To connect to closed network you need to enter the password for this access point. In this case, you do not need to enter a password every time. The tablet remembers Wi-Fi passwords and automatically connects to it when it finds a familiar network.

In some routers, privacy settings can be set hidden network. To connect to it, you need to know its name, as well as other parameters and set them manually in the settings. To do this you need to go to Wi-fi settings, find the “Add network” button (or similar). In the window that appears, you need to enter the network name and password.

How to distribute Wi-Fi from one mobile device to others

Connecting to the network via a personal computer

One of the simplest ways to connect to the World Wide Web is through the use of a computer. First you need to check your computer for support of Virtual Wi-Fi technology, and also check for the availability of up-to-date drivers. In order for the laptop to be able to distribute the Internet, you need to perform several actions:

  • install the Virtual Router program;
  • configure the newly created network in the program: give it a name and password;
  • connect the gadget to the network.

Virtual Router logo

If the laptop is connected to the network using a USB modem, the Internet will be distributed differently. You need to make sure that all Wi-Fi drivers are available and the modem is working well.

First you need to get permission to use the network. This can be done by entering netsh wlan set hostednetwork mode=allow into the command line. Command line called by the key combination Win+R. After this, you need to download the VirtualRouter Plus application, launch it and configure it. Having entered all the necessary data, you can save all the settings and try to test the connection.

There are several factors that are important in the question of how you can connect your tablet to the Internet via your laptop via USB if it does not have a Wi-Fi module. The first factor is whether the laptop has wired network access. The second factor is whether the mobile device has root rights.

Android SDK interface

Initially, you need to download the AndroidTool and Android SDK programs. After this, you can start setting up the connection:

  • In the network settings of the laptop you need to find the “Management” section network connections». Right click mouse call context menu local connections. In chapter " General access» you need to allow access to network resources;
  • On the mobile device, in the “For Developers” section, you need to enable USB debugging and connect the tablet to the laptop with a cable;
  • Next you need to launch AndroidTool. Click the update button and wait for the device to appear in the connection list. Then you need to click on Check DNS and select the second address from the top. Next, click Connect and if the connection is successful, test it from the tablet without disconnecting the laptop and tablet.

How to set up Internet on a tablet using a USB modem

How a USB modem works

Connecting using a USB modem is not the most popular for tablet devices, unlike laptops. Any such device is fully functional thanks to the use of a cable, on one side of which there is a USB input, and on the other a micro USB or Lighting connector, depending on the device. To connect you need:

  • In the settings, find the “Mobile network” item;
  • select the “Data transfer” section and enable the desired network;
  • connect the modem to the device, wait for it to be detected;
  • then select the item with the access point and set the parameters for the new point.

How to connect the Internet to a tablet via Bluetooth

This method usually does not require any additional programs, since the Internet distribution function via Bluetooth is available by default in most gadgets. To operate a mesh created using Bluetooth technology, you only need 3G or 4G Internet connected to the distribution device, and the data transfer function is also enabled. As a precaution, it is worth cleaning your device from viruses. A regular antivirus, which can be downloaded, for example, from Google Play, will help with this.

Bluetooth logo

On your Android device, you need to go to settings, “Wireless networks”, and inside the “More” section find “Modem mode”. In this menu, from all the options you need to select the “General” item. Internet via Bluetooth." The distribution is activated and the device is ready for use; all that remains is to connect the tablet to it.

You can organize this method using third party application such as BlueVPN by following these steps:

  • You need to download and install this program (it exists for all the most common operating systems);
  • Pair the devices. You need to activate Bluetooth on both devices, one of them must find the other. This is done differently in different tablets; you may need to go to the device pairing menu and perform this action there;
  • Launch the BlueVPN program. If the gadget is on the Android operating system, then additional settings he doesn't need it. For other operating systems, you will need to register an access point in the settings.

Why the Internet does not work on the tablet - common search query online. This is due to the fact that today such gadgets have almost caught up with laptops and personal computers by prevalence. Connecting your tablet to a wireless Wi-Fi network using a router is as easy as doing the same through a phone or any other equipment. However, it often happens that errors occur during the process: the connection is interrupted, data transfer begins to freeze and slow down, and may even disappear. These and many other network problems are common, so it is recommended to know what to do in such cases.

Almost all tablets on the market have several ways to access the Internet. Some are more common, others less.

Here are the main ones:

  • using a wireless Wi-Fi network;
  • using mobile Internet with a SIM card from one of the operators. In this case, the device goes online with one of the standards - 3G or 4G;
  • connecting a cable from the tablet to a computer or laptop.

Note! The most common way for a gadget to connect to the Internet is Wi-Fi.

Users begin to look for solutions when the tablet does not connect to the Internet. There are many reasons why it is impossible to connect to an access point. It happens that the Internet on the tablet via Wi-Fi does not work, although there is a connection. In this case, you cannot open any page in the browser; some applications cannot function without access to the Internet. You need to analyze the main connection problems and find ways to eliminate them.

Can't find connection point

If such a problem occurs, then most likely the cause is in the router itself. Either the router is not connected to the Internet, or it has some technical problems.

Quite rarely, but this still happens due to the fault of the tablet, since this can also signal a hardware failure of the network module or a software failure. It's worth trying to restart the tablet and check everything network settings. If everything is in order, but the access point cannot be found, then the problem is definitely in the router.

Can't get network address

Another problem in which authentication is impossible is the difficulty in obtaining an IP address. This indicates a software glitch in the gadget. A factory reset, reboot, or system update may help.

Important! Most often, when pages on the Internet stop opening, a simple reboot of the device helps.

There is a connection, but the network does not work

It happens that you can connect to the access point, but feedback No. In this case, the cause may also be a problem with both the router and the tablet. However, unlike the previous ones, the gadget itself is to blame here.

Problem solving

There are several methods designed to solve the problem of why there is no Internet on the tablet.

Setting up the signal issuing device

Note! Very often, users have problems obtaining an IP address. In such cases, working on the Internet is impossible.

You can solve the problem this way:

  • You need to change the access point name to a new one using only English characters. There is a version that some tablets cannot connect to access points with names in Cyrillic.
  • Reboot the router.
  • Change the encryption method in the settings and save it.

Preparation

When setting up connections to networks on tablets, all necessary data is received automatically. If this does not happen, then you often need to enter everything yourself. This requires:

  1. Entering the network password.
  2. Check the box next to “Advanced”.
  3. Click on DHCP.
  4. In the tab that opens, select “Custom”.
  5. When the “Custom” tab opens, you need to enter the following data: IP address - 192.168.1.7 or 192.168.0.7; gateway - 192.168.1.1; network prefix length - 24. Then DNS1 - 77.88.8.8, DNS2 - 77.88.8.1.
  6. Select "Connect".

Network IP addresses

When all the necessary actions have been completed, the user is required to delete the previous network settings. This must be set in the router settings by going to a special tab called WAN.

Subsequently, the router will receive a connection to the network. Next, on a tablet or other device you need to specify available options connections and specify the DNS and IP address. Done this procedure in the “Local Area Connection” tab.

Note! This setup is possible if the computer has a wired connection to the router.

After all the settings, the devices will have access to the Internet.

Root rights and system update

It often happens that the tablet and router are functioning normally, but there is no connection to the Network. This may occur because the user does not have rights to intervene in the system. To obtain the appropriate root rights that will allow you to make changes to the settings, you need to download special application, then launch it and select the “Root device” tab.

In addition, the cause of access problems may be the need to update the operating system. You can do this as follows:

  1. "Settings";
  2. "About the system";
  3. "System update."

Note! Quite often, updating the system solves all difficulties with Internet connections.

Replacing a SIM card

When the Internet works worse on a tablet than on a phone, and both access the Internet from a SIM card, then the problem may be a malfunction of the card itself. In this case, it must be replaced service center mobile operator. If there are no improvements, then you should check the settings of both gadgets.

Greetings to all readers of the site! Today we will talk about... A tablet computer is a multifunctional device designed to perform the most different tasks. People buy tablets for specific purposes: watching videos, reading books, playing games, working and, of course, surfing the Internet. But at the same time, many people encounter problems connecting their tablet to the global Internet. There are different solutions to these problems, and in this article we will look at how to connect your tablet to the internet.

There are several correct ways to connect the Internet on a tablet, and they all have their positive and negative sides. Nevertheless, we will dwell on each of them to help you determine the method that is suitable for you.
The first method is to connect to a Wi-Fi wireless network. This method is suitable if you are near an access point in a public place or in your home. Almost every tablet, except for the cheapest models, has a built-in Wi-Fi receiver. Naturally, in the tablet settings you can enable or disable this receiver.

Therefore, you need to go to settings, turn on Wi-Fi, and after that the tablet itself will find available networks. All you have to do is click on the desired network, enter the access password and use the Internet.
The second method will work if your tablet has support for 3G networks and a SIM card slot. This method is convenient because network coverage is available almost everywhere, so you can access the Internet anywhere.

Everything here is also very simple - the connection principle is no different from that in mobile phones. You just need to insert the SIM card into the tablet, and it should set up the connection itself. You just need to enable the “Data transfer” function in the settings. If you need additional Internet settings, you can request them from your mobile operator.
Third way how to connect your tablet to the internet- use of an external 3G modem. First of all, you must make sure that the modem can be connected to the tablet (directly into the USB connector or via an adapter).

Then switch the 3G modem to “modem only” mode - for this you will need a computer and the Hyper Terminal program.

After this, set the “Data transfer” function in the tablet settings and connect the modem. After it is recognized by the tablet, select the menu item “APN Access Points” and create new point- enter your operator's access data. Save all settings and use the Internet.
The next method is quite exotic - connecting using an Ethernet connector. This connection is used if you need fast Internet on your tablet, or if your home router cannot distribute the Internet via Wi-Fi. To connect, you will need a special adapter from USB to RJ-45 and special drivers for your tablet, which you can find on the manufacturer’s website.

USB to RJ-45 adapter

Next, simply connect the adapter with the Ethernet cable inserted into it to the tablet and turn it on in the settings Wi-Fi mode.
Another way to help resolve the issue is how to connect your tablet to the internet if your device has neither Wi-Fi nor 3G, but has Bluetooth. You will need any phone or smartphone with this technology and Internet configured on it. You must make both devices paired, then download the bt DUN program to your phone and install it on your tablet. After that, launch this program on the tablet and press the “Connect” button. It will pick up the Internet settings on your phone and distribute it to your tablet.
As you can see, there are many ways how to connect your tablet to the internet- use any of them and enjoy access to the global network.

According to statistics, tablets are most often used for surfing the Internet and working with applications, so it is useful to know how you can connect your tablet to the Internet. There are many models of tablets on the market, the more modern ones have built-in modems for Internet access, the older ones are equipped with SIM card slots, with which you can connect to the World Wide Web. There are also models that can only be connected to the Internet via a Wi-Fi network.

How to access the Internet from a tablet via Wi-Fi

To establish an Internet connection with tablet computer via a Wi-Fi network, you must first find out the name of the network you want to connect to and its password. If the network is open, then a password is not needed. Further steps are approximately the same for devices on the iOS and Android platforms. Let's give first step by step instructions to connect devices on the iOS platform to the Internet:

  1. Enter the "Settings" section.

    The Settings button looks the same on all Apple devices

  2. Select the Wi-Fi tab.

    In the settings window you need to select the Wi-Fi line

  3. Select the name of the network you want to connect to and enter the password (if necessary), then click Connect.

    When connected to public networks no password required

Tablets for Android platform connect to the Internet using a similar principle. To connect, do the following:

  1. Pull the screen down from the top to access Quick Settings. In the panel that opens, click the Wi-Fi button.

    Buttons for activated functions are illuminated in green

  2. After clicking the button, a list of all available networks Wi-Fi. Select the one you want to connect to.

    Select the network you want to connect your device to

  3. Enter the password to join the selected wireless network.

    Enter your password to access the network

  4. Check your Internet access by launching the browser installed on your device.

How to connect from a tablet to 3G or 4G mobile Internet

To connect to mobile internet 3G or 4G, you need to make sure that your tablet has a SIM card slot. If there is a SIM card slot, insert a card from one of the Russian operators mobile communications with a paid mobile Internet access service.

Select the type of SIM card compatible with your device (“nano” or “micro”)

Enabling mobile internet on Android

Standard Android system adapted even for inexperienced users, so all settings in it are quite simple. By pulling the screen down from top to bottom, you will see a panel with buttons for quick access to various functions (this panel is often called the “curtain”). On the curtain you can find a button to control access to the mobile Internet. Depending on the system version, the button may have different names (“Packet data”, “Data transfer”) or not be called at all. Visually, it looks like two arrows pointing up and down.

Activate the mobile Internet function by clicking on the “Mobile data” button

Press the button and it will light up, which means the modem is activated for reception mobile internet traffic. Remember that you can only use a 3G or 4G network if the tablet is designed to work with such networks.

Manufacturers install their own shells on some Android tablets, so appearance their home screen may look different. One of the most common shells is TouchWiz Samsung. Its interface differs from the standard one Android interface, so let’s look at setting up mobile Internet for such a device step by step. Eat quick option connection, similar to the diagram discussed above; for it, just pull the screen from top to bottom and select the button to connect to the mobile network. Another connection option looks like this:

  1. Find a button on the tablet screen with a picture of a gear and the name “Settings” and press it.

    To connect to the mobile Internet, you need to enter the device settings

  2. Select the “Connection” section and in the menu that opens, click on the “Data Usage” line.

    To connect to mobile Internet, select the “Data Usage” line

  3. In the window that opens, check the box next to the words “Mobile data”.

    Activate the mobile data feature by checking the appropriate box

  4. Open your browser and check if the internet is working.

Sometimes there may be a need for more fine adjustments. Most often this happens when connecting to the mobile Internet for the first time with a new SIM card or when you need to restore reset settings. In this case, you need to proceed according to the following algorithm:

  1. Enter the settings section.
  2. Click the “Wireless Networks” tab in the menu (it is possible that the required tab will be called “Advanced” or “More ...”).
  3. Go to the menu item “Mobile networks” (or an item with a similar name, for example, “Mobile network”).
  4. Select the line “Access Point” (options for the name “Access Points” or APN are also possible).
  5. Enter new settings (where to get the data to enter will be described below).
  6. Press the touch key with a square on it and select the “Save” action.
  7. Mark the newly created access point with a checkmark.
  8. Reboot the system.

Enabling mobile internet on iOS

Setting up a tablet on iOS is done in a similar way. You need to go to the settings section, and then select the “Cellular data” line in the menu. In the window that opens, set the toggle switches opposite the lines “Cellular Data” and “Enable LTE” to the “On” position. Then click on the “APN Settings” line and enter the values ​​received from your mobile operator in the appropriate fields. To check Internet availability, launch the browser installed on your device.

To set up mobile Internet on an iPad, you need to enter the connection parameters obtained from your mobile operator

Where can I get the data that needs to be entered when setting up mobile Internet?

For the data entered into the settings fields, you should contact the telecom operator that provides you with mobile Internet access service. This information can also be found on the website of the Internet service provider in your area.

Mobile Internet connection data can be obtained from your provider

I have never had to delve into network access settings so deeply. Usually it is possible to access the Internet even with automatically configured settings. If you still need to turn to the technical specialists of the provider company for help, they will provide you with all the necessary instructions for connecting to the mobile Internet. In other words, technical support workers will help you find the necessary fields for entering data and tell you what to enter in them.

How to set up Internet access on your tablet via a USB modem

Only owners of devices running Android OS can join the global network using a USB modem. iOS devices do not support this feature. To use the modem, you will have to purchase the modem itself, as well as an OTG cable to connect the modem to the tablet.

After connecting the modem to the tablet using a cable, you must:

  1. Wait a few minutes until the tablet recognizes the modem.
  2. After that, go to the tablet settings section and in the “Data transfer” section enable the “Mobile traffic” function.
  3. In the same section, go to the word “More” or “Advanced” and enter necessary information in the “Mobile network” and “Access point (APN)” settings. As mentioned above, this information can be obtained from your Internet service provider.
  4. Launch your browser and check internet availability.

Video: how to connect your tablet to the Internet via a USB modem

How to connect a tablet to the Internet via a smartphone

To connect your tablet to the Internet using your smartphone as a wired modem or wireless router, you need to enable modem mode on your smartphone. Available for Android OS devices various modes operation of a smartphone as an Internet access point: USB modem, Bluetooth modem, Wi-Fi access point. iOS-based smartphones can only provide their owners with wireless access mode.

Setting up modem mode on Android devices

To activate the modem function on an Android smartphone, you need to follow these steps:

  1. Select the “Wireless Networks” section in the phone settings menu, and in it - the “More...” line.

    On the Wireless Settings screen, select "Tethering Mode"

  2. On the screen that opens, set the desired mode. The smartphone can serve as a USB modem, a Wi-Fi access point, or be used as a Bluetooth modem.

    Select the appropriate modem operation mode

Testing Internet speed when using a smartphone as a modem showed that best result gives the “Wi-Fi access point” mode.

Activating tethering mode on iOS devices

To activate modem mode on iPhone smartphones you need to enter the device settings, select the “Modem mode” line and in the window that opens, set the toggle switch opposite the words “Modem mode” to the “On” position. The page will display the name of the network and the password to access it. This data can be used to connect the tablet to the Internet, which is distributed through a smartphone.

In modem mode, the smartphone independently generates a password to access the Internet, which you will need to enter when logging into the network from the tablet.

After activating modem mode on your smartphone, you need to connect your tablet to it. The steps to connect the tablet to a wireless network and to a USB modem are described above.

The author advises to remember that the names of menu items and the location of these items may change depending on the version used on the device software. But, despite this, the author always managed to perform the correct sequence of actions when setting up Internet access from mobile devices, guided by the available instructions and simply common sense and logic. As a last resort, you can read the documentation for specific device or ask friends, colleagues or relatives for help.

Video: how to connect your tablet to the Internet via your phone

Internet connection on modern mobile devices can be done different ways. They are all quite simple, you just need to read the instructions first. But if you encounter difficulties while connecting to the network, then do not hesitate to seek help from the younger generation, colleagues at work, or the service specialists of your Internet provider.