Program for recovery of Toshiba 8gb flash drive. Do-it-yourself USB flash drive repair: we fix hardware and software problems. MicroSD Transcend Recovery

The South Korean-Hong Kong company Qumo is a popular manufacturer of flash drives, multimedia devices, tablets and other electronics. The products of this company have gained popularity due to their low price and good quality. The company's production lines are located both in Korea and in Taiwan and China.

Flash drives and memory cards produced by Qumo 32gb, 8gb, 4gb fail quite often. This happens due to glitches software, aging and imperfection of equipment, getting wet, etc.

Flash memory, like memory cards, has a certain number of write/read cycles. If the flash drive is used for a long enough time, then broken clusters may well appear. Errors are also often the cause of failures. file system. They appear during an incorrect shutdown (pulling out the flash drive) or during a power outage.

What to do if flash drives are not detected?

In cases where a flash drive or card is not detected when connected, shows zero memory, or is detected as an unknown device, they need to be restored. Some brands have special recovery utilities, but Qumo is not one of them. Therefore, to “treat” them you need to use universal programs low-level programming.

  1. Recovering and saving information stored on damaged media. After running any recovery program, all data on the flash drive or memory card will be lost. Therefore, if this information is important, use the R-Studio program or another similar program before repairing. Use it to create a disk image, scan the amount of information, and then restore everything that can be recovered. R-Studio is a program that is not the fastest in operation, but is capable of restoring as much information as possible on damaged media.
  2. Use a utility program suitable for restoring Qumo cards and flash drives:
  • USB Disk Storage Format Tool. An HP program that is perfect for formatting Qumo storage devices.
  • EzRecover– universal software tool, among others, capable of repairing and Qumo drive. After installing the program, insert the broken flash drive into your computer and run EzRecover. The program will give an error the first time you run it, but the next time it will definitely detect a flash drive or card and give you the opportunity to restore it.
  • Flashnul. This program does not eliminate errors, but simply identifies defective parts of the device and resets the information.

Tips: In fifty percent of cases, an SD card that cannot be formatted on a computer can be formatted perfectly on another device. Try formatting using your phone, camera, or something else. If this works and you can read and format the flash drive in this way, then repeat the formatting on your PC after that.

In especially difficult cases, to restore a flash drive or 32gb, 8gb, 4gb cards, you need to open the media case and close the chip contacts. If you do not have such skills, then it is better to leave this work to specialists.

There are several solutions for creating data backups:

  1. Applications built into the operating system. Microsoft Windows provides data backup methods that involve saving files and data on external or built-in storage media. All modern Windows versions already include the ability to create backup copy necessary files or all hard drive, if necessary. The functions provided by Windows are complete and self-contained, and are designed to ensure that you do not need to use third party services or programs.
  2. Copying data manually. You can always use the old proven method of creating a data backup - manually copying the data to an external storage medium. This is a long process, but if you work with a small amount of data, this solution may be quite acceptable for you.
  3. Online services. Recently, the most popular modern way data backups are numerous online services. Companies that provide backup of your files directly on the Internet. Small installed on your computer background application, creates copies of the necessary data and stores them on remote server. However, the volumes provided by such companies for storing your files in the free version do not allow them to be used as a comprehensive solution. Often the space offered for data backup does not exceed 10 GB, so there is no need to talk about creating a backup copy of the entire hard drive. Such services are rather aimed at reserving a separate number of files.
  4. Creating a disk image. This is the most complete data backup solution used by advanced users. This method involves using third party program to create an image of the entire disk, which can be deployed, if necessary, on another storage medium. Using this solution, you can in a short period of time gain access to all the data that was on the disk at the time of its backup: documents, programs and media files.

Mirex flash drive models for 64gb, 32gb, 16gb, 8gb, 4gb, 2 gb:

  • ARTON;
  • BINAR;
  • KNIGHT;
  • RABBIT;
  • ROCKET DARK;
  • DRAGON;
  • HARBOR;
  • CHROMATIC;
  • TURNING KNIFE;
  • Crab;

MicroSD recovery is a very popular topic these days, because flash drives break very often, and you don’t want to lose information from them.

Therefore, many are looking on the Internet for information about the easiest way to obtain information from a media that does not work.

Moreover, the problems can be very different - for some, the flash drive simply cannot be restored, for others, errors appear, and so on.

And the answer to the above question is very simple - there is a special program for restoring MicroSD, and not just one.

The user only needs to use the most suitable one.

MicroSD recovery programs

CardRecovery

This program does an excellent job of restoring photos, videos and audio content from storage devices.

Unfortunately, it does not restore regular files, which is why it is intended only for those flash drives that are used in mobile phones, cameras and players.

How to use CardRecovery:

  1. Download the program from this link. We launch it, read the greeting and click Next.
  2. Select the flash drive in the Drive letter section, the device type in the “Camera Brand and File type” section (we also check the boxes next to the types of files that will be recovered) and the folder where the recovered files will be saved in the Destination Folder section. Click Next.
  3. We are waiting for the restoration process to complete. Click Next.
  4. We see a list of recovered files. We put a tick next to those that we want to save. Click Next one last time. The process is over.

PC Inspector Smart Recovery

It's already much more functional program, which recovers almost all file types available today.

It works for both non-removable hard drives and removable media. To use it, you need to do the following:

  1. Download the program from this link. Open it.
  2. In the start window, select the “Recovery of logical files” item. You may need to click on the tab with the green up arrow on the left.
  3. Next, you need to select the desired drive on one of the tabs (it can also be among the logical drives). Click on the checkmark on the right.

Hint: You can find out the letter and name of the flash drive in Windows in “My Computer” (“Computer”, “This Computer” depending on the OS).

  1. Select the starting and ending sector. This must be done so that the scan size matches the media size. Click on the checkmark on the left.
  2. Next we will see a list of all files. Green indicates those that can be restored, and yellow indicates those that do not require restoration. After this, you need to click on the floppy disk icon on the left.

R-Studio

On the official website they write that today this is the most “comprehensive” file recovery software.

Users do not resist this conclusion. To recover data using R-Studio you need to do the following:

  1. Download the program (here is the link) and run it.
  2. In the Drivers section, click on the media from which data will be recovered. Its properties will be displayed in the Properties section.
  3. Next, the folders will be displayed in the Folders section, and the files in this folder will be displayed in the Contents section. To restore them, you need to click on the Recover button on the top panel of the program window.

Easy Recovery

Many experts say that this is true good program to recover files. There is only one way to check this:

  1. Download the free version of the program from this link and run it.
  2. In the start window, click “Continue”. Next, select “Memory cards”.
  3. Click “Continue” again. Select “Data Recovery” and check the box next to the file system of this media at the bottom.
  4. Click “Continue” again. Wait for the scan to finish deleted files and windows with a report on the list of deleted files and folders. You can click on each one right click mouse and select “Save as...”.

Flash Memory Toolkit

This is a very multifunctional program.

In addition to recovery, it can also perform the functions of testing, destroying confidential information, backup and obtain detailed information about the device.

To recover data, you just need to select the flash drive in the Device section, click on the File Recovery item in the menu on the left and follow all the instructions of the program.

Clue: All of the above programs can be downloaded for free on the non-commercial resource flashboot.ru.

Read our other articles about flash drive repair:

Sometimes restoring a MicroSD flash drive using the above programs does not go as smoothly as you would like - some problems may arise.

Let's look at the most common of them.

Problems with MicroSD recovery

MicroSD is not detected

It happens that you need to restore a MicroSD card, but the computer simply doesn’t see it.

It’s interesting that this usually happens completely unexpectedly and for no apparent reason: the user inserts the card again, and suddenly the computer stops seeing it (previously he inserted it, and everything was fine).

In this case, there are three options:

    1. The letter of the drive name matches the letter of the already connected drive. Indeed, it is possible that some kind of storage medium is already connected to the computer, and for some reason the flash drive is designated by the same letter when connected. In this case, you need to open the standard Disk Management utility (Win + R and enter “diskmgmt.msc”), select the flash drive there, right-click on it and select “Change drive letter or drive path.” After this, all that remains is to specify some other letter of the Latin alphabet and save the changes.

    1. Lack of drivers. In some cases, both the old proven computer and the new computer with a newly installed operating system may not have drivers for some media. There is only one way out - download and install them. The best way to do this is by searching on the official website. You can use the program. You can download it from . It independently determines which devices are connected to the computer and whether there are driver updates for them. It’s convenient that the program itself will determine whether drivers for the flash drive are installed. If this is not the case, they will be installed en masse, along with everyone else. To do this, the user just needs to click on the “Drivers” tab on the left and click on the “Install automatically” button.

  1. You can also try connecting the memory card to another device. This will give you a chance to still read necessary files and use the recovery program. For example, you can insert a MicroSD into your phone and restore not the card itself, but the entire phone as a storage medium.

Read other GeekNose materials on disk data recovery:

Another common problem is that the computer sees the flash drive, but does not see the files on the flash drive themselves.

The computer does not “see” MicroSD files

This means that the flash drive itself is detected by the computer, but some files (or even all) are missing from it.

The user may immediately think that the problem is in the card itself and it needs to be restored. But everything can be much simpler.

The solution to this problem is to check your computer for viruses, in particular Trojans, and remove them.

Indeed, the Trojan can make files hidden. So feel free to turn on and use your antivirus before lamenting about lost data.

It is worth saying that in some cases the MicroSD recovery process may differ depending on the device manufacturer.

Recovering MicroSD from different manufacturers

MicroSD Transcend Recovery

For MicroSD cards Transcend has its own file recovery software. It's called RecoveRx.

This program takes into account the individual characteristics of cards from a given manufacturer and is able to perform its functions much better than all of the above programs.

In addition to recovery, RecoveRx can format the card and put a password on it.

To perform a restore, you must do the following:

  1. Download and run the program (here is the link). Select Recover from the menu at the top. In the program window, select Transcend (may differ depending on the name of the card, by default it is the same as shown here).
  2. Select file types.
  3. Wait for the process to complete and see a list of files available for saving. Save the ones you need using the drop-down menu (the one that appears after right-clicking on the file).

Recover MicroSD Kingston

The problem with flash drives from this manufacturer is that they mainly use Phison controllers.

This means that the user will have to resort to low-level recovery.

Other methods may simply not work. Briefly described, the process is as follows:

    1. Define the Vendor ID and Product ID parameters so that you can then use them to find the required utility. This can be done using the USBDeview program (link). Open the program and find the desired card on the list. Right-click on it and select “Html report: selected elements”. Scroll the window that appears until you see the Vendor ID and Product ID.

  1. Go to the website flashboot.ru/iflash/ and enter in the appropriate fields required parameters. As a result, we will see a list of all cases where problems occurred with this model. And on the right, in the UTILS section there will be programs for low level recovery this model. The user needs to try them all - usually more detailed instructions for use can be found on the official websites.

MicroSD Kingmax recovery

Kingmax also has its own software. There are two programs - one for U-Drive and PD-07 series drives, and the second for Super Stick.

You can download both programs.

Their use is extremely simple - you need to insert a USB flash drive, launch the program and click on the desired drive.

Sandisk MicroSD Recovery

After this, the flash drive will work like new. Using the programs is very simple.

In Formatter Silicon Power in general there is only one small window with two buttons (you need to click Format there), and in SDFormatter there are more options, but it will still be enough to click on the Format button.

Smartbuy MicroSD recovery

There is one interesting thing about working with flash drives from this manufacturer - if the flash drive doesn’t work, you can just wait for up to several years, and after that it will work again.

If you don’t want to wait, you need to try all the recovery programs you can find.

This application looks like a regular folder.

Having selected the media, you need to click on the Recover button at the top, wait for the process to complete and see a list of files that can be recovered.

Qumo MicroSD recovery

MicroSD from Qumo are famous for the fact that they just suddenly die. One day they stop working, and after that it will be very problematic to see any signs of life in them.

Some users advise using the above R-Studio programs and CardRecovery. But not in all cases they will be effective.

There are special companies that are engaged in restoring “dead” flash drives using hardware methods, but such services are not cheap, and it is usually cheaper to purchase a new drive.

A-Data MicroSD Recovery

In this case, too, most programs do not help. Paragon Partition Manager Free works best with A-Data flash drives.

First, you need to perform formatting in this program (Format Partition button in the main menu), and then create a new empty section(Create new partition).

Oltramax MicroSD recovery

It helps in this case too full formatting using SD Card Formatter. In some cases, it is possible to restore the drive's functionality using ALCOR MP.

Full instructions for its use can be read.

Recovering damaged MicroSD

In some cases, when using the drive, the message “Damaged memory card” or something similar may appear on the screen.

The following programs help here:

  • Smart Data Recovery – you need to select the media and click the Find button, after which it will search for all files that can somehow be recovered;

Rice. No. 14. List of files available for recovery in Recuva

  • BadCopyPro – click on Memory card on the left, then Next, Next again, wait for the process to finish and see the list of required files.

The same operations can be performed on a device running Android OS. The following applications help here:

Prevention

It is better to use the flash drive correctly first so that later there are no problems with its malfunction. Here are some tips to help avoid MicroSD failures:

  1. Do everything possible to ensure that the drive is not dropped, knocked, bent, exposed to extreme temperature changes or other impacts that could damage it.
  2. Avoid ionizing radiation (such as from X-ray machines).
  3. Do not touch the contacts with your fingers and generally try to always keep them covered with a special cover.
  4. Defragment the card from time to time and generally use it regularly - MicroSDs don’t like to just sit on the shelf.
  5. Try to make backups from time to time so that in case of a breakdown you do not lose all your data. To do this, you can use cloud storage.
  6. Do not fill the entire storage capacity; let there always be some free space.
  7. If the card is in some device, try to remove it from there as often as possible.

See our other materials on formatting hard drives and flash drives:

Flash cards have become an excellent substitute for disks; they are characterized by low cost, but they contain a lot of information and are easy to use. The most popular are drives ranging in size from 4 to 32 Gb. This amount of memory reserve is enough to store programs, libraries and even databases. Despite the low price, such products are often counterfeited, resulting in incompatibility with the PC or other problems with interaction.

Causes of flash drive malfunctions

  • Manufacturing defects. In this case, it is difficult to do anything to recover information. The easiest way is to throw away such an accessory and buy another one, not forgetting to check it on the spot;
  • Lack of necessary drivers. Often drives are defined as an “unidentified device”, as a result of which it is impossible to work with them normally. Installing utilities from the disk included with the flash drive or downloading them from the Toshiba official website will help here. After installation, you need to reboot the system and try to restart the device;
  • Incompatibility of the file system of the USB gadget with the PC OS. Many versions of Windows absolutely do not interact with RAW system, but it is on this that Toshiba drives of 8 Gb and 16 Gb are based. Here it is necessary to completely format the memory card and change the file system type. For this you will need special programs, which will be discussed below;
  • There is a problem with the software of the drive itself. Incorrect formatting, removing the flash drive from the connector during data transfer and careless handling (rinsing in washing machine) may affect the quality of operation of the device. Restoration is carried out in the same way as in the paragraph above;
  • Damaged controller. It can be rehabilitated through the use of special utilities. So, for a Toshiba 8 Gb drive (controller type AB 8028-K/L716/CE7106.0, memory type iFLASH/ISF0032MUDC/0530) you will need the PDx8 v3.27 program. It is also suitable for other flash drives from this manufacturer.

How to restore a Toshiba drive

The flash drive is new and there is no data on it, but it does not interact correctly with the system or the information contained on the device can be deleted without consequences

If the gadget is detected by the PC system, then it needs to be formatted. For this operation there is no need to download third-party application software; the built-in functions of your computer will be sufficient.

Open the “My Computer” tab and find the flash drive. It is displayed under the main drives and is indicated by the letters G or F. Right-click on it and select the “Format” option.

All settings can be left as default. The file system type must be set to FAT32 or NTFS.

To see more information about the removable drive, activate the “Start” button, then “Control Panel”, in the window that appears, select “Administrative Tools”, go to “Computer Management”, and from there to “Disk Management”. You can do formatting from the same tab.

A non-functioning flash drive with important data remaining on it

It doesn’t matter what exactly caused the device to not work. If you try to format it, you risk losing all the accumulated information, so additional programs are used here. The most popular are:

  • Arconis;
  • Recuva;
  • R-Stadio;
  • GetDataBack.

In essence, they perform the same process - sector-by-sector data recovery on the media. Utilities differ in interface and number of options. Among the general advantages we can note the presence free versions developments, the ability to integrate with everything nearby Windows systems, a relatively simple user experience panel. No programming skills are required to work with the utilities, but you need to know exactly what changing this or that option will lead to before activating it.

You can independently select the type of files to be restored, as well as their size and the approximate date of copying to the media. The fewer overwrites there were on the Toshiba flash drive, the faster and easier the recovery process will be. The time of the latter also depends on the volume of the media. Transferring files from a 16 Gb card sometimes takes up to several hours.

Defective memory card with recovered data

You "pulled" necessary information from the media, but its performance has not improved, so you need to resort to using other programs that are designed to correct errors on flash drives.

These include EzRecover and F-Recovery (Toshiba version). The first is useful in cases where operating system does not see the media or its volume has sharply decreased from 8Gb to 0 bytes. It is not necessary to change the file system here, but for better interaction the user can set it to NTFS.

The second utility is used in all other cases, including in case of minor lags of the device. She produces low level formatting, restores the zero track and copes with problems of recording media files to the device.

Despite the wide selection of utilities and their versatility, it is best to use those programs that come in the accompanying disk or developments posted on the manufacturer’s official website. Drivers for each controller and individual flash drive can be found here. Here you need to indicate the full name of your PC, including model and production series.

For those who are new to English, it will be easier to use a search engine and download the updated Russian-language driver installer.