Lg nexus 5 firmware. Instructions on how to flash the official firmware on a Nexus device (Video). Updating the operating system version over the air

If you want to experiment and install the latest on your Nexus 5 or Nexus 2013 Android version 5.0? This article will tell you in detail how to install firmware on Nexus devices.

Since Google has released official final images for NEXUS, there is no point in downloading preview versions - download and install Android 5.0 Lolipop on Nexus

  1. Prerequisites and components
  2. Instructions for Nexus firmware
  3. Video instructions for Nexus firmware

What is needed for firmware?

1. Computer or laptop (Windows OS)

2. Original, undamaged MicroUSB cable

3. Charge your Nexus device to at least 30%

7. Download the site’s proprietary program - ADB RUN and install

8. If more than one archiver is not installed on your computer, install 7-zip

Instructions on how to flash official firmware

Nexus devices

Put Nexus into Bootloader mode

Option 1

a) Turn off the device

b) Clamp buttons at the same time Volume Down And Pfood

Option 2

a) Run the program Adb RUN(works only when “USB Debugging” is enabled, if you have not done so earlier)

b) Connect Nexus to your computer using USB

c) Select the ADB RUN menu Reboot -> Reboot Bootloader

Preparing the firmware

2. Unzip the downloaded firmware (the firmware is in two archives)

Firmware Nexus 5 and Nexus 2013 to Android L

3. In the program ADB RUN go to menu Run SCRIPT

4. Move the firmware files to the explorer window that opens and close the window

5. Press the Enter button and the firmware will begin (during the firmware do not pull out the USB cable)

Possible problems with firmware

error waiting for device

If you have the following message on in the command window for a long time: waiting for device- Means:

  • The driver is not installed or installed incorrectly - reinstall or install
  • Android device is not in Bootloader mode - switch to the appropriate mode
  • Incorrect connection to USB port- use the rear ones USB ports 2.0 computers, do not use USB hubs
  • Try flashing the firmware on another computer

A couple of days ago I installed the latest version of Android 7.1.1 revision 21 from Pure Nexus on my LG Nexus 5. All this time I was driving in the tail and in the mane. On this moment I don't see any problems. The firmware is stable and works flawlessly.

The device began to work noticeably faster after Paranoid Android 6.0.1. Perhaps, of course, this is due to accelerated animations of the interface and service events. But the phone feels like a completely different device.

What will be required for installation?

  • Google Apps - Dynamic Gapps

With camera in latest version Google applications There was a problem with video recording, and the HRD+ mode was not functional at all. This fix rolls back the camera version to stable and blocks its further updating.

How to install the firmware?

Naturally, you should start by creating a backup copy of your current firmware. This stage helped me out when experimenting with the previous firmware revision No. 16. In the post on XDA there was attached a link to an incompatible version of Gapps, and the program initial setup The phone kept crashing. It was impossible to use the phone. So never neglect to create a backup copy of working firmware.

I originally uploaded setup files to the ROMs folder in the phone memory using ES File Explorer. You can, of course, select any folder you wish.

Installation steps:

  • Backup systems- save the system partition, data, cache and boot partition of the current working system (TWRP checkboxes: System, Data, Cache, Boot);
  • Wipe systems- erase everything from the phone except the internal storage, where your files (photos, downloads, etc.) will remain;
  • Installing ROM firmware- in TWRP go to the section Install, find the purenexus_hammerhead file, click Install Image, wait for the process to complete;
  • Installing Google apps- similar to the previous paragraph only with the Full_Dynamic_GApps file;
  • Rolling back the camera app before stable version- the same thing, but with the file n5_nougat_gcam3_fix-signed.zip


It is done! All the work took me about five minutes (except for the backup), TWRP worked quickly, without errors. The initial loading of Android lasts about three minutes, then loading and rebooting occurs very quickly - within 20-30 seconds.

After downloading, the Setup Wizard will launch, which will help you restore system settings from the cloud. Then, as usual, the long process of downloading applications that were installed earlier. And then you can enjoy your new Nexus 5 with the seventh Android on board.

Thank you, please.

It's all somehow connected

You need to install new firmware on Nexus smartphone or tablet or suddenly turned the gadget into a brick? This article will tell you in detail how to install the official firmware on Nexus devices.

What is needed for firmware?

  1. Computer or laptop (Windows OS);
  2. Original, undamaged MicroUSB cable;
  3. Charge your Nexus device to at least 30%;
  4. Download the official firmware for your Nexus device;
  5. Download drivers for Nexus and then install them (if not installed);
  6. Enable "USB debugging" on Android;
  7. Download the site’s proprietary program - ADB RUN and install;
  8. If you do not have more than one archiver installed on your computer, install 7-zip.

Instructions on how to flash official firmware
Nexus devices

1. Put your Nexus into Bootloader mode

Option 1

a) Turn off the device

b) Clamp buttons at the same time Volume Down And Nutrition

Option 2

a) Run the program Adb RUN(works only when “USB Debugging” is enabled, if you have not done so earlier)

b) Connect Nexus to your computer using USB

c) Select the ADB RUN menu Reboot -> Reboot Bootloader

2. Unzip the downloaded firmware (the firmware is in two archives)

3. In the program ADB RUN go to menu Run SCRIPT

4. Move the firmware files to the explorer window that opens and close the window

5. Press the Enter button and the firmware will begin (during the firmware do not pull out the USB cable)

Video instruction

If you can't flash it? (Unlock Bootloader)

Some Nexus update scripts don't include instructions to unlock the Bootloader, so you'll have to do it yourself! The procedure is performed once and does not need to be repeated.

1. Connect Nexus to computer

2. Launch the program ADB RUN

3. Next you need to switch to Bootloader Nexus mode, for this in ADB RUN go to menu Reboot Devices -> Reboot Bootloader

4. After the device has rebooted into a special mode, unlock Bootloader Nexus; to do this, return to the main menu ADB RUN and go to the menu Manual Command ->Bootloader Unlock and Lock (Nexus) -> Unlock Bootloader

On Nexus you will be asked if you want to unlock the bootloader (volume up/down keys, power selection) select YES

Detailed step-by-step instructions for flashing LG Nexus 5 (Hammerhead) to the original firmware with an unlocked bootloader in Fastboot mode.

Attention!

For all further manipulations with the device, an unlocked bootloader is required. To unlock it, this instruction can help.

Installation instructions

    Create a folder in the root of the C:\ drive named " Android».

    Download the archive with the original firmware image and unpack it into the “Android” folder. You can find the current version on the official website.

    Open a command prompt and go to the created folder Android team « cd c:\Android\"(commands are written without quotes).

    Connect your phone to your computer using a USB cable.

    Make sure that the computer finds the device via ADB.
    To do this you need to enter " adb devices" to the command line. When a request appears on the phone for permission to debug via ADB on this computer you must press " Ok", while selecting the item " Always allow from this computer" If the device is visible, the text “ List of devices attached" and a list of all devices (for example, xxxxxxx device). If instead of “device” it says “offline” or the list is empty, then you need to update ADB, check the drivers/cord, change USB port/computer.

    Reboot your phone into bootloader mode.
    To do this, you need to turn off the device, turn it on while simultaneously holding down the Volume Down key and the Power button, or command line enter " adb reboot bootloader" If everything is done correctly, the following message will appear on the smartphone screen: Start and Android “lying” on its back with open lid.

    The first time you connect to a computer in Fastboot mode, the system may ask for drivers. To install them, you must specify the path to the folder with the downloaded drivers. If this does not happen and the device is not detected, you need to go to “ device Manager", expand drop-down menu " Other devices" and double-click on the item " Unknown device"(or " Android 1.0") With exclamation point in the yellow triangle. In the " Are common» click on the button « Update driver", refuse to search the network and specify the path to the folder with drivers, while activating the item " Including subfolders" A warning may appear stating that the publisher could not be verified, but you should still ignore this message and continue with the installation. After some time, the drivers will be installed.

    Check the availability of the device in bootloader mode by entering the command " fastboot devices" If the device is connected correctly, the device identifier with the word “fastboot” will be displayed (for example, “ xxxxxxx fastboot"). If nothing is displayed or “waiting for devices...”, then you need to update the drivers, change the USB port, or try to do these steps on another computer.

    Now you can start installing the firmware in one of two ways. Both methods require that the phone is in bootloader mode.

    Method 1 (Automatic)

    • At the command line enter " flash-all.bat" and wait for the firmware installation to complete.

    When the operation is complete, the device should reboot. The initial startup may take some time, but no more than five minutes. If after this time the device is still “hanging” at boot, it is necessary to perform the so-called. Hard Reset. To do this you need:

    • Put your phone into bootloader mode.
    • Use the volume buttons to select the item Recovery Mode and press the power key to confirm your choice.
    • When a small recumbent robot appears with a triangle and the text " No command", hold down the power button and press the volume up key once, then immediately release them simultaneously. The phone will be booted into stock recovery.
    • Now you should select the item “ wipe data/factory reset " and on the next screen - " Yes -- delete all user data».
    • After deleting data is complete, select “reboot system now”.

    This time the device should boot without problems.

    Method 2 (Manual)

    On the command line, perform the following steps one by one:

    1. To clean the system:
      • fastboot erase boot
      • fastboot erase cache
      • fastboot erase recovery
      • fastboot erase system
    2. Now you need to flash the bootloader and reboot:
      • fastboot flash bootloader bootloader-hammerhead-*.img
      • fastboot reboot-bootloader
    3. Next, flash the modem and reboot the device again:
      • fastboot flash radio radio-hammerhead-*.img
      • fastboot reboot-bootloader
    4. And finally, flash the system in this way (if you remove the -w parameter, then user files will be saved):
      • fastboot -w update image-hammerhead-*.zip
    5. Or unpack the archive image-hammerhead-*.zip and manually flash all system components as follows:
      • fastboot flash system system.img
      • fastboot flash boot boot.img
      • fastboot flash recovery recovery.img
      • fastboot flash cache cache.img
    6. For complete cleaning enter user data:
      • fastboot erase userdata
      • fastboot flash userdata userdata.img
    7. Wait for the operation to complete and reboot the phone manually:
      • fastboot reboot

    After some time, the device will boot and be ready for further work. The initial startup usually takes a long time, but no more than five minutes.

Update operating system smartphone to the last existing version– this is a guarantee that you will receive some innovations or corrections of current errors in a timely manner. Of course, for some users it is important that their phone only makes calls and sends messages, but even in this case, you need to update the device’s OS, since innovations can affect absolutely everything, as a result of which even basic actions undergo transformation and become more comfortable and convenient. Next you will find detailed description how to update your operating system Nexus 5– the first carrier.

Though Nexus 5 and is one of those smartphones that receive operating system updates first, and the device was designed with users in mind who like to delve into processes and change something, but there are probably those happy owners of the legendary device who may not know about everything subtleties and nuances of the update. This guide was created specifically for them.

We update

  • Make sure that your smartphone has a stock version of the operating system installed, and that there is also an available WiFi connection– the update file usually weighs several hundred megabytes.
  • As soon as the notification about the ready OTA update arrived on your Nexus 5, click on it.
  • You will see detailed basic information about the update files and a "download" button. That's right, you need to click on it.
  • The next stage is installation. Click the "install" button and wait for this process to complete. automatic mode, then Nexus 5 will reboot.
  • Start exploring innovations or perform all the usual actions on new version OS.

What to do if the notification does not arrive?

No need to worry, you can use an alternative method instead:

  • Go to Settings.
  • Open the item that contains information about the device (About Device).
  • Go to System Updates and click on the Check Now button.
  • If the files for your smartphone are ready, download and install them.

What to do if official updates are already online, but my Nexus 5 doesn't find them?

All OTA updates are distributed gradually, depending on regions. This is causing delays in some countries. This problem can be solved thanks to manual installation factory image Android(Factory Image). In this case, all data and settings from your Nexus 5 will be deleted.

  • To begin, create backups all important files and settings.
  • Download and install USB drivers for your Nexus 5 to drive C in the SDK folder.
  • Unlock your smartphone's bootloader.
  • Enable USB debugging option.
  • Charge your smartphone.
  • Do not forget that all responsibility for the operation lies solely with you.

Now you and yours Nexus 5 ready for manual installation of official OS updates.

1. Download updates for Nexus 5.

2. Unpack the .tgz archive on your PC.

3. Turn off your smartphone.

4. Download Nexus 5 V Fastboot Mode , while simultaneously holding the Volume Down, Volume Up and Power buttons.

5. Using USB cable, connect your smartphone to your PC.

6. On your PC, open the folder with the content unpacked in step 2 and run the flash script -all.bat for Windows or flash-all.sh for MAC or LINUX.

7. Wait until the installation finishes.

8. On your device, go to the Home screen Fastboot and select the Recovery menu item.

9.Press the power button to boot Nexus 5 into recovery mode.

10. Select the wipe data/factory reset option and confirm the start of the process.

11. Return to main screen recovery mode and reboot Nexus 5 to normal mode.

12. Disconnect the smartphone from the PC only after a complete reboot occurs.