Life modem e173 connection to a laptop. We connect the MTS modem to the laptop - selecting a device and setting it up. Manual modem setup
Currently, it is difficult to imagine a cell phone that does not provide access to the network space. In addition to the smartphone, Mobile Internet is also available for other devices, including personal computers and tablets. Connection to the World Wide Web occurs through special equipment - a router or USB router. How can I configure it to work correctly? In this article we will analyze in detail all the ways to connect an MTS modem to a laptop.
How to connect to PC
To use mobile Internet on a personal computer, you need to purchase the appropriate equipment - a USB modem or router. It can be purchased at any MTS store or from partner organizations. We recommend purchasing devices only from licensed locations. There are various device modifications available to choose from, which are designed for specific data transmission standards - 3G or LTE. If necessary, you can place an order for home delivery.
The gadget's starter kit comes with an instruction manual and a driver disk. It is no larger in size than a regular portable memory card, which greatly improves transportation when traveling. How to connect an MTS modem to a computer? Proceed according to the instructions:
Windows 7, 8, 10
If you purchased a 4G modem from Mobile Telesystems, you must install the appropriate software on computer. To do this, follow the algorithm:
In some cases, difficulties arise: the desktop computer does not see the connected equipment. To correct the situation, do one of the following:
Now run mobile app"Connect". In the main menu, select a section network settings. Here, set the high-speed data transfer standard that your equipment supports - LTE, 3G, 2G.
After that, go to the access point setup tab. In this menu you need to enter email address APN – “internet.mts.ru”, contact number for connection - *99#, as well as account name and password - mts.
Reboot your system. An Internet connection indicator should appear in the main application window.
Windows XP
The setup instructions for the modem in this case are completely identical, as in the previous paragraph for operating Windows systems above version 7. Connect the gadget to your laptop and activate the utility. The differences are only in the location of the main controls.
Attention! The USB modem only supports MTS SIM cards.
If you have a router at home that provides wireless connection with the world wide web, you can connect to it USB device and distribute mobile Internet. An important condition for success is the presence of an appropriate USB port in the router case. To connect, perform a number of settings:
Attention! If the hardware does not meet the requirements, change it or the software.
Installation on a tablet
Not everyone knows that a modem device can be used on tablet computer. The connection procedure is quite complicated and may not always be successful. First, you should check whether the equipment is compatible with this mode of operation. Most modern tablets only come with a micro USB connector, so you won't be able to directly connect these two gadgets. A special adapter cable can solve this problem. If everything is done correctly, the 4G or 3G indicator should light up on the device’s display. After this, write down the characteristics of the access point. Set your email address – “internet.mts.ru”, phone number- *99#, as well as name and code - mts. Now you can use mobile Internet on your device.
Unfortunately, sometimes the tablet sees the modem as unknown equipment or mistakes it for another module. To fix this problem follow the instructions:
How to use the application
To enter the Internet space, the provider has implemented a special utility “MTS Connect”. This application has the following functionality and characteristics:
- The main window of the program displays the exact balance status at the current time, as well as the amount of available traffic in the billing period.
- If the established limit has come to an end, you can activate renewal services and expand the standard set to the required volume.
- You can receive and send messages in any direction of communication.
- Voice communication management.
- The ability to timely replenish your personal balance using a bank card.
- Monitoring and regulation of data transmission speed.
- The interface is made as simple as possible, all the main controls are displayed on the desktop.
Attention! Not all brands and models of modems support the listed characteristics and capabilities.
To activate the connection, you will need to click on the “Connect” button.
After a few seconds you can consume network resources. The main menu displays:
- SMS – for writing and reading messages.
- Challenges. Making a call or typing USSD commands.
- Settings. Changing device operating parameters.
- Balance. Displays the current account status.
The modem is easy to use.
Possible problems
Not everything is so smooth and simple, let’s consider possible problems and pitfalls:
- Consumers often complain that the application consumes a lot of resources and slows down its performance. To solve this problem, we recommend closing all third party programs and windows that are not currently in use.
- There are many problems with the utility on operating system Windows 10
- Many subscribers are not satisfied that only an MTS SIM card can be used in the modem device. This deficiency can be corrected by updating the hardware. The provider does not recommend doing this in order to avoid permanent breakdown of the gadget.
- Please note that MTS does not guarantee that the actual speed corresponds to the declared speed. 3G and 4G performance can be affected by many environmental factors, uneven terrain, weather conditions and user location.
The article looked at effective ways to install an MTS modem on a computer or tablet device. The procedure may take a long time. If you cannot set up the equipment yourself, contact our consultants for assistance at technical support“0890” or at any operator service department.
This article was prompted by a letter from one of our users. “Hello, I have a job that requires frequent business trips and a lot of free time after the end of the working day. Tell me how to connect the laptop to the Internet so that the speed is normal?”
The situation is very familiar, the presence of the Internet today is urgently needed for many: work, communication or just access to necessary information. I’m not considering a mobile phone, since I don’t have to talk about comfortable and full-time work, work in Photoshop or edit a table in Excel.
How can I connect a laptop to the Internet using a modem?
First of all, you need to buy a modem and register it with one of the telecom operators. By the way, you can choose the model you need from them and connect the optimal tariff. And so we already have a sierra 720U modem and are trying to configure it ourselves.
We connect the modem to one of the free USB ports. We recommend using a USB extension cable for connection to prevent damage to the modem if you use the laptop carelessly.
On many modems, all necessary software is installed and configured in automatic mode, but if this is not in your model, and the kit comes with a disk with drivers, you will need to do everything yourself.
Install the necessary drivers. If necessary, reboot the laptop.
We check our modem, to do this you need to go to “Control Panel / System and Security / System / Device Manager” in the modem category select our device. Go to the “Diagnostics” tab and click the “Poll the modem” button. If the drivers are installed correctly, the diagnostics will be successful.
Let's move on to creating the connection. “Start / Control Panel / Network and Internet / Network and Sharing Center shared access»
Setting up a new connection or network
Select the first item “Internet Connection”
Since our connection will be via a modem, we select the “Dial-up” connection type.
We enter the data received from the Internet provider (dial-up number, login and password).
The connection has already been created, but it is advisable to perform a few more small operations.
To make it convenient to connect to the Internet, let's create a shortcut on the desktop. Go to “Change adapter parameters”, select our connection and right-click to call context menu and click “Create shortcut”.
If you need to disconnect the connection, click on the monitor icon in the lower right corner of the screen and click the disconnect button.
Instructions
Video on the topic
Sources:
- how to connect internet via laptop
Laptops have been gradually being replaced for a long time personal computers desktop type. Their mobility gives them a significant advantage over bulky system units and monitors. And naturally, every laptop user sooner or later wants to connect it to a local networks or the Internet. Built-in Wi-Fi and Bluetooth modems make this task much easier for us. The presence of a network cable sticking out of the laptop greatly interferes with its movement even inside the apartment, not to mention going outside it. Therefore, it is very useful to know about other ways to connect a laptop to a local networks and the Internet.
You will need
- Wi-Fi router
- Network cable
Instructions
Install the drivers and software provided with your Wi-Fi router. Connect to using a network cable as follows: insert one end of the cable into network card laptop, and the second - to the WAN port. Open your browser and type //192.168.0.1 in the address bar. In most cases, the router settings management page will open. If this does not happen, look at the instructions for the router and enter the required address.
Unfortunately, there is no universal method for setting up a router. Remember the main points you will need to program your router. 1. The access point in the router must match the access point of a standard cable connection.
2. Among the data encryption methods, it is better to choose WPA2, if your laptop supports it. Otherwise, use WPA or WEP.
3. Be sure to set a password for your router. This will avoid further problems associated with it.
Video on the topic
When buying a router, make sure that its characteristics match the capabilities of the laptop.
Use only complex passwords.
Modem connection is divided into three types: DSL – broadband connection using telephone line, Dial up – dial-up connection using a telephone line, 3G – connection using cellular communication. According to the above criteria, modems are also divided into three groups.
Instructions
The netbook has been one of the most fashionable devices for the last few years, and this is quite justified. Lightweight, compact, allowing you to go out into Internet at any time and almost anywhere, netbooks have become reliable and indispensable companions on trips and on vacation. Connection to Internet For a netbook, the procedure is quite simple. To do this, just connect your desktop computer and netbook to a local network.
You will need
- - netbook;
- - router
Instructions
First you need to decide on the structure of the future network. If you plan to use a netbook without being tied to a specific place in the world, then it makes sense to organize a wireless Wi-Fi network. There will be no need to lay another network wire, but additional investments will be required for wireless.
If the costs didn’t scare you and you purchased a router, then the next step is to configure it. To do this, connect the router with a network cable. To connect, use one of the ports marked LAN. Connect the supplier's cable to the WAN port.
In the window that opens, enter your username and password. The router settings window will open. Modern ones have very different interfaces, but are simple and easy to set up. After this, launch the “Setup Wizard” and carefully follow all the suggested steps. Be sure to write down the Wep encryption key you create during the setup process and the name of your network.
Turn on Wi-Fi and click on the wireless network icon in the tray. A window will open where all available networks. Select yours by double clicking the mouse. The system will prompt you to enter the key. Enter the key you created when setting up the router and click “Connect”.
In the left window, click on the “Change network preference order” link. At the bottom of the window, highlight the name of your network and click the “Properties” button. Check the box next to “Connect even if the network is not broadcasting.” Now the netbook will connect to the Internet via your local network.
Sources:
- how to connect a netbook to wifi
- Netbook asus eee PC 1011
Tip 6: How to connect a laptop to the Internet if one computer is already connected
Creation local network with Internet access is an extraordinary process. This can be done in several ways, so everyone can choose for themselves the option that is most acceptable in a particular situation.
You will need
- Wi-Fi adapter, network cable.
Instructions
Open the list. Find the network that its connection with laptop ohm Go to its properties. Open TCP/IP protocol settings. If you are using the Windows Seven operating system, then there will be two such protocols. Choose version 4 rather than version 6.
Save your settings. Open the connection properties on the computer. Find the “Access” tab and click on it. Activate the item responsible for providing Internet access to all computers on the local network.
Turn on laptop. Open the settings described in the third step. Enter 192.168.0.2 in the IP Address field. Now you need to fill in the “Default gateway” and “Preferred DNS server" Enter . Save your settings.
There are times when it is impossible to make a cable connection between a computer and laptop ohm In such situations, adapters come in handy wireless communication. Buy one Wi-Fi. It is better to use a device that works with USB port, as it is easier to connect.
Install the software that came with your Wi-Fi adapter. Open the control menu wireless networks. Click the “Add” button and click on the “Create a computer-to-computer network” item. Set a password and name for the connection. Save your settings.
Sources:
- how to connect internet to laptop via computer
Tip 7: How to set up an Internet connection on a laptop
You will need
Instructions
To create a home wireless point access with access to you will need a Wi-Fi router (router). There is a huge amount of similar equipment on the computer market. But you need to choose the right router that is right for you.
Review your laptop's specifications. Find out the types of wireless networks that you can use without problems network adapter. If you require a wide signal distribution area, pay attention to this parameter.
Connect the purchased Wi-Fi router to the network alternating current. Connect the Internet connection cable to it. For this purpose, the device has an Internet (WAN) port.
Connect the laptop to the router via the LAN (Ethernet) port. For this purpose, a network cable is supplied with the device. Launch your browser and enter address bar IP Wi-Fi router.
Find the Internet Setup menu and open it. Change the settings in this menu to those recommended by your ISP. This is necessary to provide the router with Internet access. Enable the DHCP feature if supported by your equipment.
Open the “Wireless Setup” menu. Create and enter a name (SSID) and (Password) to access the network. Select the types of data and radio encryption your laptop supports. Save the entered settings and restart the Wi-Fi router. Sometimes this requires some power supply.
Video on the topic
Sources:
- setting up internet on laptop
In a situation where you occasionally need to connect the Internet to laptop using the network mobile operator, they recommend not purchasing a USB modem, but using a cell phone for this purpose.
You will need
- - PC Suit.
Instructions
Make sure your model is cell phone supports modem functions. To do this, read the instructions for your mobile phone. If you do not have a paper version of the instructions, go to the official website of the manufacturer of your mobile phone and find the required information on it.
Set up access to Internet on your mobile phone or PDA. If this equipment supports the 3G network, configure this connection.
Download special program, allowing you to ensure reliable synchronization of your laptop with your mobile phone or PDA. These can be the following programs: Nokia PC Suit, Samsung PC Studio, Sony Ericsson Suit and so on.
Install the selected program and run it. Next we will look at an example of connecting a laptop to Internet using the Nokia PC Suit utility.
Connect your PDA or mobile phone to the USB connector of a laptop using a special cable. Launch the program by clicking on the shortcut on your desktop. Go to the "Connect to" menu Internet" Go to Settings. Click "Next".
Select “Set up a connection manually” and click the “Next” button. Fill in the following fields: “Access point”, “User name”, “Password”. These items are filled in similarly to setting up a connection on PDA. Click the "Done" button.
Now click the “Connect” button. Wait until the process of connecting your mobile phone to Internet. Do not close the active connection window. Otherwise, you'll break this connection, thereby disabling access to Internet.
To ensure quick access to resources, install an application that allows you to run JAVA telephone programs on your computer. Launch Opera mini.
A few years ago, to access the Internet you needed to have certain technical specifications. Therefore, not everyone could afford such luxury. It was especially problematic to gain access to it in areas remote from the city. Today, to take advantage of the network, you just need to buy modem, configure it and you can access the Internet within the network coverage area.
Instructions
Take modem, read the instructions. It should describe installation steps in accessible language. It is important to pay attention to compatible operating systems, and this should be done in the store. In principle, if you have Windows XP installed on yours, you can be sure that modem will work without problems. When using any other operating systems - Windows 95, 98, 7, Linux - you must consult in advance regarding compatibility.
Run installation disk. An installation program is included with any computer equipment. With its help you need to install modem. To do this, insert the disk into the drive with the mirror side down, and then close it. After a few seconds, a special window will appear on the monitor, symbolizing the start of installation. At the same time, a tooltip “new equipment found” will appear. This means the disk has been detected. If this does not happen within a few minutes, then run the installation yourself. To do this, you need to select: Start (the icon on the left on the bottom panel of the monitor); My Computer (or just "computer"). A disk icon should appear among devices with removable media. Open it with double click left mouse button or click once right button and from the pop-up menu select the “open” command. If the disk is not displayed here, then remove it and try to start again. If nothing happens this time, then either the drive is faulty or the removable media is damaged.
Install the program. To do this, just follow the prompts. After the installation window appears, you need to select the language and root folder to save files on your local disk, and then click the “install” button. The program will install automatically.
Paste modem into the USB connector and configure the Internet connection settings. You can obtain them from your service provider.
Video on the topic
When creating a wireless local network, you must not only configure Wi-Fi correctly modem, but also set the parameters of mobile computer adapters. To connect to the desired network It is important to know the parameters of the corresponding access point.
You will need
- Wi-Fi module.
Instructions
Connect mobile computer to a Wi-Fi modem via a network cable. To do this, it is recommended to use a direct crimp patch cord. The connection should be made through an available LAN channel.
Open a web browser on your mobile computer. Switch to graphical interface modem settings by entering the desired IP address in the URL field. Now open the Wireless Setting or Wi-Fi menu.
Examine the parameters of the created access point. Pay attention to the following characteristics: security type (WEP, WPA or WPA-2), radio channel operating mode (802.11 g, n or b), key type (TKIP or AES).
Disconnect the LAN cable from the modem. Open Network and Sharing Center using your mobile computer operating system. Go to the "Wireless Network Management" menu.
Click the "Add" button located on the top control panel. After starting the Connection Wizard, select “Create a network profile manually.”
Fill out the form provided after opening the new menu. Check that the settings are correct. Check the box next to “Start this connection automatically” if you are connecting to your home hotspot.
Click "Next" and wait for the connection settings to update. Open Network and Sharing Center and look at the list of active connections. Make sure your mobile computer has Internet access.
If the Wi-Fi modem you are using is broadcasting a hidden SSID, then in the last menu of the settings wizard, activate the “Connect even if the network is not broadcasting” item. Using a hidden access point name allows you to increase the security level of your Wi-Fi modem. At the same time, this mode of operation of the device may cause incompatibility of some devices with the access point.
Modems operating in 3G networks from cellular operators perfectly match modern laptop models. This is an excellent solution if there is no other way to connect to the Internet. Such modems are compact, provide sufficient communication speed, and operate according to wireless technology. The only drawback is the high traffic tariff, but when there is no other choice, we buy a modem, connect it, and configure it.
Turn on the laptop and wait for the operating system to fully load. Remove the cap from the modem that protects it from dust. Connect the modem to any free USB port laptop computer. The laptop's USB port is designed in such a way that it is impossible to insert the modem into it incorrectly. If the modem does not fit into the port, then it must be rotated 180 degrees around its axis. Do not use too much force to avoid damaging the modem connector and contacts. It should fit into the connector easily. Some modem models have a special ON/OFF button. If your modem has such a switch, then set it to the “on” position.
If the modem management program is successfully installed, the corresponding program icon will appear in the lower right corner of the taskbar. Use it to get important and useful information: the status of your personal account, data reception and transmission speed, daily traffic consumption.
Modems for working in 3G networks from leading cellular operators fit very well into the concept of laptop operation. They are compact, not tied to a specific location, as they operate using wireless technology and provide acceptable data reception/transmission speeds. Often they become the only possible solution in cases where, for various reasons, it is impossible to connect a wired unlimited Internet. Their only significant drawback is the high tariffs for incoming and outgoing traffic. But when there is no choice, then there is no choice. All that remains is to connect the modem and use traffic sparingly.
How to connect a 3G modem to a laptop
- Remove the protective cap that protects the device from contamination and insert the modem into one of the free USB ports of the laptop. The USB port is designed in such a way that you can connect to its connector only in one position of the modem. If the modem does not fit into the USB port with little effort, then try turning it 180 degrees around its axis. Do not apply significant force to avoid bending the contacts of the modem and connector. After using and removing the modem from the laptop, it is recommended to close it with the protective cap.
- Some modem models are equipped with an on/off button. If this switch is also present on your modem, then set it to the on position.
- Wait until the computer detects the new device and recognizes it. You can know that the device is recognized by the inscription “device installed and ready to use” in the lower right part of the screen.
- Check power wireless USB modem When the device is installed in the USB port, the LED indicator on the modem should be lit, indicating that power is supplied from the computer, since 3G modems do not have a built-in power source.
- Install the modem management software from the included disk. After successfully installing the drivers and software, a new device corresponding to the USB modem should appear in the control panel. If the control panel on this device contains exclamation marks in yellow triangles, this means that some errors occurred during the installation process. Uninstall the modem software, restart your laptop, and try installing it again. If the problem recurs, contact your telecom operator's consultants for support.
- Launch the modem management program, enter the login and password issued by your cellular operator and try to connect to the Internet and start traveling on the World Wide Web.