Alcatel on touch pop 2 characteristics
Alcatel POP 2 5042D, which we will talk about today, is a continuation of the line called One Touch. This Chinese device is sold locally Russian Federation for only five thousand rubles.
Briefly about technical characteristics
Later we will talk about the parameters of the Alcatel POP 2 5042D in more detail, but now we will look at the fundamental points. You could say the cornerstones on which this device is based. So, for a price of 5 thousand rubles we get not the newest software shell (“Android” 4.4), not the largest volume random access memory(1 GB) and not the best quality screen. Time battery life The device will not please us either, the battery is designed for only 2,000 milliamps per hour. But with communication capabilities Alcatel POP 2 5042D is fine. Nevertheless, who will look at the set of communications if they will not allow you to use the device for a long time? But first things first.
Display
It's safe to say that the screen is the part of the smartphone where you encounter the most noticeable paradox. On the one hand, the Alcatel POP 2 5042D is equipped with a TFT matrix, which today has the worst display quality. It is easily overtaken by IPS, but we don’t even have to talk about AMOLED and S-AMOLED.
Basic indicators
So, POP 2 5042D has a screen resolution of 480 by 854 pixels with a diagonal of 4.5 inches. Calculations indicate that the pixel density is 240 pixels per inch. If the manufacturer installed an IPS matrix in the screen rather than a TFT one, this would be noticeable progress and could greatly change the rating of the device. Nevertheless, the TFT matrix, or rather its installation, is a kind of payment here for the low cost of the device. Actually, there is another justification for using TFT: low battery capacity. Such a matrix will consume charge more efficiently than the same IPS.
Color rendition
It is pleasantly surprising that the screen does not give off excessively blue tints, as is the case with many budget solutions. In general, the color rendering of the POP 2 5042D is good; it is at a good level. There is an almost crystal clear White color, for which I would like to thank the developers. And this is even at low brightness levels. Yes, of course, there were some errors. For example, in small text you may notice blurring of fine lines, and when you turn the device into a vertical plane, the color scheme will be distorted. But can the opponents of the Alcatel One Touch POP 2 5042D, belonging to the same price category, boast anything else? Hardly.
Additional modules and functions
The Alcatel smartphone is also equipped with a light sensor that will allow you to adjust the screen backlight level according to your needs. automatic mode. Considering that not all models costing seven thousand rubles have this function (and even those costing ten thousand rubles, oddly enough), you can be happy about such a set. By the way, the Alcatel smartphone changes the brightness level without any jerks, doing everything softly, smoothly and gradually.
The developers have added a rather interesting solution to the device. Like Lumiya, the device can be either woken up from sleep mode or brought back into sleep mode by double tapping the display. When you “awaken” it will immediately open main screen, and the lockscreen will be skipped. The same can be done exactly the opposite.
Camera
Alcatel POP 2 5042D, the price of which is about five thousand Russian rubles, is equipped with two cameras. The main one has a resolution of five megapixels. The front one is more modest, only two megapixels. The main module is complemented by the function of automatic focusing on the subject, and there is an LED flash. However, you shouldn’t place a huge bet on it, since it copes with its tasks (due to low power) very, very mediocrely.
Inconsistencies
By the way, problems were identified with the front camera. The previously provided information about two megapixels was received from developers and company officials. However, repeated tests carried out using special software showed that there is only 0.3 MP. We won’t notice any special settings, there are only two of them: activating/turning off the night mode and creating four photos in a row. The compression algorithm is good and allows you to save space on your phone. It is possible that the company initially planned from 0.3 to 2 megapixels, but for some reason decided not to do this. For those who are not experienced in selfies, the result will still be acceptable.
What about the main camera?
The Alcatel POP 2 5042D, the firmware for which will optimize the operation of the operating system, has a fairly good main camera. Despite its five megapixels, in good lighting it produces really high-quality images. In parallel with how the light level drops, the quality will also deteriorate, but this seems quite logical. Automatic focusing not only works quickly, but also competently; you won’t be able to dig into the process or results.
Software part
The work of software and hardware that corrects results in the creation of good pictures. Even without setting advanced settings, you can take high-quality photos in almost any type of lighting. When shooting faces, the user can enjoy a slight shift in the spectrum towards warmer tones. This parameter has almost no effect on other scenarios, so it can be assessed positively. There is a macro mode. It will not provide perfect results. Nevertheless, lovers of shooting flowers and other objects can safely count on it.
Macro
What can you say about photos with text? In principle, it is unlikely that you will be able to boast about any extraordinary achievements. But the necessary level is still present. If you take a photo of an A4 page, the text on it will be easy to read even without special scaling. However, readability will decrease in proportion to the reduction in letter size. Alcatel POP 2 5042D, the characteristics of which are listed at the beginning of the review, does not allow good shooting at night. Even though it has flash. Its only sensible purpose is to use it as a flashlight.
Practical use
If you are an active user, then you will definitely have to purchase a case for the Alcatel POP 2 5042D, so as not to damage the case and not wash the coating. We have already talked about the operation of the display, so there is no point in repeating ourselves. You can look at the topic of communications, which will probably be more interesting for those who are planning to use a smartphone for its intended purpose. That is, actively communicate in in social networks, browse the Internet and call your loved ones.
So, on the cellular network fourth generation The device works quite quickly. It immediately “clings” to the coating. Considering the price of the device, this is even a little surprising in a pleasant way, of course. The signal indicator shows impressive information. In general, the device switches from the third to the fourth generation and back very quickly. And it really makes me happy. It is clear that in this case there can be no complaints about the quality of data transmission. No problem here.
Wireless networks and speakers
Wi-Fi module sensitivity high level, there are no complaints against him. I was pleased with the fast and accurate operation of the GPS. There is an A-GPS add-on, which once again makes it easier to work with satellite maps of the area. Coupled with a good “hook” of the smartphone on the coating cellular networks, these parameters provide an excellent opportunity to use the device as a communicator. The radio part was done superbly, you can’t argue with that.
As for the sound, this part of the subject of our today's review is the very fly in the ointment. It becomes a kind of rehabilitation. The multimedia speaker is far from perfect. Hissing and crackling - these are its main shortcomings. There is nothing else to highlight, but this “sweet couple” is enough, as they say, for the eyes. Probably, Alcatel should have gone in this direction with an eye on the ingenious solutions of the Beeline company, where there is no multimedia speaker, and its role is played by a universal auditory speaker.
Companies that, as a result of a merger or acquisition, become owners of a recognizable and popular brand can dispose of the inheritance in different ways. Some of them don’t really know what to do with the acquisition, which is why the once popular trademark slowly loses market share and disappears into the distant and happy past. This is roughly how the situation with the former leader, Nokia, is developing. After it was acquired by Microsoft Corporation, smartphones from the Finnish manufacturer can be found less and less often in real life. But Alcatel was luckier.
After several major mergers, the rights to the brand ended up with the Chinese TCL, which is very actively promoting smartphones on the market produced by the joint venture TAMP (TCL & Alcatel Mobile Phones Limited). The Alcatel One Touch POP 2 5032d review that you are reading now is not a eulogy to the once legendary brand, as skeptics might assume, but an attempt to understand whether it is possible to step into the same river twice. Or, if you prefer, proof that if a manufacturer is not ready to be satisfied with past achievements and carefully listens to the opinions of consumers, everything should work out for him. Therefore, we decided that reviews of the alcatel one touch pop 2 5042d would be no less relevant than an analysis of the technical characteristics or a comparison of the new product with its closest competitors. Agree: the opinion about a phone expressed by an ordinary person sometimes means more when choosing one than several professional reviews.
Scope of delivery and intended market positioning
We have already mentioned several times that you can’t count on any additional goodies when buying even a high-end smartphone these days. And our today’s hero confirms this: the buyer will not find anything unnecessary in the box. A standard power supply with an output current of 1A, a micro-USB cable, headphones and terse instructions. All! You can forget about the included memory card, driver disc, or coupon for downloading the game from Google Market. Such savings can be explained, but if previously unpacking a newly purchased gadget was almost a holiday, now it has turned into a routine and unremarkable operation.
With the target audience, the question is not as simple as it seems. On the one hand, they are asking only 5,500 rubles for a smartphone, which clearly hints at its budget status with all the ensuing consequences. On the other hand, the Alcatel One Touch pop 2 does not seem overtly cheap or unsightly, and the future owner of the device will be protected from an inferiority complex. Consequently, the manufacturer offers us an inexpensive, but by no means budget smartphone, designed for a relatively wide audience. This is also facilitated by the calm and discreet design, the quality of the materials used and the overall impression of the new product, which is usually formed in the first 2-3 hours.
Display and design features
Why did we decide to place the main emphasis on the screen, and consider the hardware characteristics required by the state in passing? Agree, the type of processor used, the amount of RAM, etc. technical specifications the average person is not always interested, and if a smartphone is more or less adequately capable of performing everyday tasks, talking about the speed of the chip will only be of interest to an enthusiastic amateur.
In Alcatel One Touch pop 2, the designers used a regular TFT screen, rightly judging that IPS technology has no place in a budget device. The display resolution is only 854 x 480 pixels, which can be a problem with a screen diagonal of 4.5 inches. If you try hard, you can see individual points, and straight lines will turn into a stepped ladder. Moreover, the TN matrix is physically unable to provide the number of colors stated in the specifications, when any deviation from a strictly vertical angle results in fading of one part of the screen and a sharp violation of the accuracy of the shades of another.
Such a display will not add popularity points to a smartphone, but in ordinary life the situation does not seem so dire. In the end, in this price range One way or another, you have to make compromises, and for calls or Internet browsing, color accuracy is not that important. Especially considering the stated price.
Photographic Opportunities
They didn’t get greedy here, so the owners of Alcatel One Touch pop 2 can with a clear conscience save 50–100 dollars on buying a budget point-and-shoot camera. Our hero today shoots very, very well, especially if you take care of more or less decent lighting. The smartphone camera clearly does not reach the level of Sony or HTC, but the difference is noticeable only when directly compared in specialized programs.
Landscapes and still lifes are good for the new product, but defects and artifacts begin to appear when shooting in low light conditions. You can see some sample photos below, but we really liked them. And you can not pay any attention to the belief that has spread in recent years, according to which a smartphone should take pictures no worse than a professional DSLR camera.
Examples of photographs using the Alcatel One Touch POP 2 5032d camera
Alcatel One Touch POP 2 5032d shoots very well 
Even with artificial lighting Photos come out bright and clear 
The situation is a little worse in low light conditions 
Landscapes and still lifes are good for the new product 
Photos of text are clear and not blurry
Communication and communication capabilities
If certain items of expenditure are cut, then much more money remains for other items. And if, when developing a new product, the choice of display type was carried out on a residual basis, then they did not skimp on communications. How is it so inexpensive smartphone were able to provide support for all existing standards, it is unclear, but the fact remains. Alcatel One Touch pop 2 works in 2nd, 3rd and 4th generation networks and is capable of exchanging information via Wi-Fi standard b, g and n. Also available are Bluetooth 4.0 and Wi-Fi Direct.
For an inexpensive smartphone, such omnivorousness is amazing. Therefore, the label that was awarded to the new product immediately after the announcement of criticism is nothing more than nitpicking. The model keeps excellent communication in almost any conditions and boasts support for 4G networks. A similar set of capabilities is not often found in much more expensive smartphones, therefore it is impossible to accuse Alcatel’s brainchild of being inferior.
Hardware platform
It would be wrong to completely ignore issues related to performance, so let’s briefly touch on the hardware. The smartphone does not have the fastest processor from Qualcomm (Snapdragon 410) and only 1 GB of RAM. Even taking into account the fact that the chip is 4-core, you can’t count on anything special. It was released at the end of 2013 and has become quite outdated, but for undemanding users its capabilities are more than enough. But the meager savings on memory can no longer be logically explained and justified.
The smartphone does not have the fastest processor from Qualcomm
Accelerometer(or G-sensor) - sensor of the device’s position in space. As a main function, the accelerometer is used to automatically change the orientation of the image on the display (vertical or horizontal). Also, G-sensor is used as a pedometer, it can be controlled various functions device by turning or shaking.
Gyroscope- a sensor that measures rotation angles relative to a fixed coordinate system. Capable of measuring rotation angles in several planes simultaneously. A gyroscope together with an accelerometer allows you to accurately determine the position of the device in space. Devices that use only accelerometers have lower measurement accuracy, especially when moving quickly. Also, the capabilities of the gyroscope can be used in modern games For mobile devices.
Light sensor- a sensor that sets the optimal brightness and contrast values for a given light level. The presence of a sensor allows you to increase the battery life of the device.
Proximity sensor- a sensor that detects when the device is close to your face during a call, turns off the backlight and locks the screen, preventing accidental clicks. The presence of a sensor allows you to increase the battery life of the device.
Geomagnetic sensor- a sensor for determining the direction of the world in which the device is directed. Tracks the orientation of the device in space relative to the magnetic poles of the Earth. The information received from the sensor is used in mapping programs for terrain orientation.
Sensor atmospheric pressure
- sensor for precise measurement of atmospheric pressure. It is part of the GPS system, allows you to determine altitude above sea level and speed up location determination.
Touch ID- fingerprint identification sensor.
Accelerometer / Geomagnetic / Light / Proximity
Satellite navigation:
GPS(Global Positioning System) is a satellite navigation system that provides measurements of distance, time, speed and determines the location of objects anywhere on Earth. The system is developed, implemented and operated by the US Department of Defense. The basic principle of using the system is to determine location by measuring distances to an object from points with known coordinates - satellites. The distance is calculated by the delay time of signal propagation from sending it by the satellite to receiving it by the antenna of the GPS receiver.
GLONASS(Global Navigation Satellite System) - Soviet and Russian satellite navigation system, developed by order of the USSR Ministry of Defense. The measuring principle is similar American system GPS navigation. GLONASS is designed for operational navigation and timing support for land, sea, air and space-based users. The main difference from the GPS system is that GLONASS satellites in their orbital motion do not have resonance (synchrony) with the rotation of the Earth, which provides them with greater stability.
3G, Android 4.4, 4.50", 854x480, 8GB, 147g, 5MP camera, Bluetooth
MAIN TECHNICAL CHARACTERISTICS
Nutrition
Battery capacity: 2000 mAh Battery: removable Talk time: 8 h Standby time: 400 hAdditional Information
Equipment: smartphone, battery, Charger, headset, instructionsGeneral characteristics
Type: smartphone Weight: 147 g Controls: touch buttons Housing material: plastic Standard: GSM 900/1800/1900, 3G, LTE Operating system: Android 4.4 Housing type: classic Number of SIM cards: 2 Multi-SIM card operation mode: alternating Dimensions (WxHxT): 65.4x132.5x9.95 mm SIM card type: micro SIM LTE band support: bands 1, 3, 7, 8, 20Screen
Screen type: TFT color, 16.78 million colors, touch type touch screen: multi-touch, capacitive Diagonal: 4.5 inches. Image size: 854x480 Pixels per inch (PPI): 218 Automatic screen rotation: yesCalls
Type of melodies: polyphonic, MP3 melodies Vibrate alert: yesMultimedia capabilities
Camera: 5 million pixels, LED flash Camera functions: autofocus Video recording: yes Max. video resolution: 1920x1080 Front camera: yes, 0.3 million pixels. Video playback: H.265, H.264 AVC, H.263, MPEG-4 SP, XVID, VP8, VC-1 Audio: MP3, FM radio Voice recorder: yes Max. video frame rate: 30 fps Recognition: faces, smiles Geo Tagging: yesConnection
Interfaces: Wi-Fi 802.11n, Wi-Fi Direct, Bluetooth 4.0, USB Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, HSPA+ Standard: GSM 900/1800/1900, 3G, 4G LTE DLNA support: yes Satellite Navigation: GPS A-GPS system: yes LTE band support: bands 1, 3, 7, 8, 20 Protocol support: POP/SMTP, HTMLMemory and processor
Processor: 1200 MHz Number of processor cores: 4 Built-in memory capacity: 8 GB RAM capacity: 1 GB Memory card support: microSD (TransFlash), up to 32 GB Amount of memory available to the user: 5 GB Memory card slot: yes, up to 32 GBMessages
Additional SMS functions: text input with MMS dictionary: yesOther functions
Control: voice dialing, voice control Sensors: light, proximity, compass Speakerphone (built-in speaker): yes Flight mode: yesNotebook and organizer
Organizer: alarm clock, calculator, task scheduler Book search: yes Exchange between SIM card and internal memory: There isInformation about the make, model, and alternative names of the specific device, if available.
Design
Information about the dimensions and weight of the device, presented in different units of measurement. Materials used, colors offered, certificates.
| Width Width information - refers to the horizontal side of the device in its standard orientation during use. | 65.4 mm (millimeters) 6.54 cm (centimeters) 0.21 ft (feet) 2.57 in (inches) |
| Height Height information - refers to the vertical side of the device in its standard orientation during use. | 132.5 mm (millimeters) 13.25 cm (centimeters) 0.43 ft (feet) 5.22 in (inches) |
| Thickness Information about the thickness of the device in different units measurements. | 9.95 mm (millimeters) 1 cm (centimeters) 0.03 ft (feet) 0.39 in (inches) |
| Weight Information about the weight of the device in different units of measurement. | 147 g (grams) 0.32 lbs 5.19 oz (ounces) |
| Volume The approximate volume of the device, calculated based on the dimensions provided by the manufacturer. Refers to devices with the shape of a rectangular parallelepiped. | 86.22 cm³ (cubic centimeters) 5.24 in³ (cubic inches) |
| Colors Information about the colors in which this device is offered for sale. | Yellow Black Silver Grey White Purple Blue Green Red |
SIM card
The SIM card is used in mobile devices to store data that certifies the authenticity of mobile service subscribers.
Mobile networks
A mobile network is a radio system that allows multiple mobile devices to communicate with each other.
| GSM GSM (Global System for Mobile Communications) is designed to replace the analogue mobile network (1G). For this reason, GSM is often called a 2G mobile network. It is improved by the addition of GPRS (General Packet Radio Services), and later EDGE (Enhanced Data rates for GSM Evolution) technologies. | GSM 850 MHz GSM 900 MHz GSM 1800 MHz GSM 1900 MHz |
| UMTS UMTS is an abbreviation for Universal Mobile Telecommunications System. It is based on the GSM standard and belongs to 3G mobile networks. Developed by 3GPP and its biggest advantage is providing greater speed and spectral efficiency thanks to W-CDMA technology. | UMTS 2100 MHz UMTS 850 MHz (5042A; 5042D; 5042E; 5042G; 5042W; 5042X) UMTS 900 MHz (5042A; 5042D; 5042E; 5042G; 5042W; 5042X) UMTS 1900 MHz (5042A; 5042D; 5042E; 5042G; 5042W; 5042X) UMTS 800 MHz (5042F) |
| LTE LTE (Long Term Evolution) is defined as a fourth generation (4G) technology. It is developed by 3GPP based on GSM/EDGE and UMTS/HSPA to increase the capacity and speed of wireless mobile networks. The subsequent technology development is called LTE Advanced. | LTE 2100 MHz LTE 2600 MHz (5042A; 5042D; 5042E; 5042G; 5042W; 5042X) LTE 1900 MHz (5042A; 5042E; 5042W) LTE 1800 MHz (5042D; 5042F; 5042G; 5042X) LTE 900 MHz (5042D; 5042G; 5042X) LTE 850 MHz (5042A) LTE 700 MHz (B28) (5042E; 5042G; 5042W) LTE 800 MHz (5042F) LTE 1700/2100 MHz (5042A; 5042E; 5042W) |
Mobile communication technologies and data transfer speeds
Communication between devices on mobile networks is carried out using technologies that provide different data transfer rates.
Operating system
An operating system is a system software that manages and coordinates the operation of hardware components in a device.
SoC (System on Chip)
A system on a chip (SoC) includes all the most important hardware components of a mobile device on one chip.
| SoC (System on Chip) A system on a chip (SoC) integrates various hardware components, such as a processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software necessary for their operation. | Qualcomm Snapdragon 410 MSM8916 |
| Technological process Information about the technological process by which the chip is manufactured. Nanometers measure half the distance between elements in the processor. | 28 nm (nanometers) |
| Processor (CPU) The primary function of a mobile device's processor (CPU) is to interpret and execute instructions contained in software applications. | ARM Cortex-A53 |
| Processor size The size (in bits) of a processor is determined by the size (in bits) of the registers, address buses, and data buses. 64-bit processors have higher performance compared to 32-bit processors, which in turn are more powerful than 16-bit processors. | 64 bit |
| Instruction Set Architecture Instructions are commands with which the software sets/controls the operation of the processor. Information about the instruction set (ISA) that the processor can execute. | ARMv8 |
| Level 0 cache (L0) Some processors have L0 (level 0) cache, which is faster to access than L1, L2, L3, etc. The advantage of having such memory is not only more high performance, but also reducing energy consumption. | 4 kB + 4 kB (kilobytes) |
| Level 1 cache (L1) Cache memory is used by the processor to reduce access time to more frequently used data and instructions. L1 (level 1) cache is small in size and works much faster than both system memory and other cache levels. If the processor does not find the requested data in L1, it continues to look for it in the L2 cache. On some processors, this search is performed simultaneously in L1 and L2. | 16 kB + 16 kB (kilobytes) |
| Level 2 cache (L2) L2 (level 2) cache memory is slower than L1, but in return it has a higher capacity, allowing caching more data. It, like L1, is much faster than system memory (RAM). If the processor does not find the requested data in L2, it continues to look for it in the L3 cache (if available) or in RAM memory. | 2048 kB (kilobytes) 2 MB (megabytes) |
| Number of processor cores The processor core executes software instructions. There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to be executed in parallel. | 4 |
| CPU clock speed The clock speed of a processor describes its speed in terms of cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz). | 1200 MHz (megahertz) |
| Graphics Processing Unit (GPU) Graphics processing unit (GPU) handles calculations for various 2D/3D graphic applications. In mobile devices, it is most often used by games, consumer interfaces, video applications, etc. | Qualcomm Adreno 306 |
| Clock frequency GPU Speed of work is clock frequency GPU speed, which is measured in megahertz (MHz) or gigahertz (GHz). | 400 MHz (megahertz) |
| Amount of random access memory (RAM) Random Access Memory (RAM) in use operating system and all installed applications. Data stored in RAM is lost after the device is turned off or restarted. | 1 GB (gigabytes) |
| Type of random access memory (RAM) Information about the type of random access memory (RAM) used by the device. | LPDDR3 |
| Number of RAM channels Information about the number of RAM channels that are integrated into the SoC. More channels means more high speeds data transmission. | Single channel |
| RAM frequency The frequency of RAM determines its operating speed, more specifically, the speed of reading/writing data. | 533 MHz (megahertz) |
Built-in memory
Each mobile device has built-in (non-removable) memory with a fixed capacity.
Memory cards
Memory cards are used in mobile devices to increase the storage capacity for storing data.
Screen
The screen of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.
| Type/technology One of the main characteristics of the screen is the technology by which it is made and on which the quality of the information image directly depends. | TFT |
| Diagonal For mobile devices, screen size is expressed by the length of its diagonal, measured in inches. | 4.5 in (inches) 114.3 mm (millimeters) 11.43 cm (centimeters) |
| Width Approximate screen width | 2.2 in (inches) 56 mm (millimeters) 5.6 cm (centimeters) |
| Height Approximate screen height | 3.92 in (inches) 99.64 mm (millimeters) 9.96 cm (centimeters) |
| Aspect Ratio The ratio of the dimensions of the long side of the screen to its short side | 1.779:1 |
| Permission Screen resolution shows the number of pixels vertically and horizontally on the screen. Higher resolution means clearer image detail. | 480 x 854 pixels |
| Pixel Density Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be displayed on the screen with clearer detail. | 218 ppi (pixels per inch) 85ppcm (pixels per centimeter) |
| Color depth Screen color depth reflects the total number of bits used for color components in one pixel. Information about the maximum number of colors that the screen can display. | 24 bit 16777216 flowers |
| Screen area Approximate percentage of screen area occupied by the screen on the front of the device. | 64.6% (percent) |
| Other characteristics Information about other screen features and characteristics. | Capacitive Multi-touch |
Sensors
Different sensors perform different quantitative measurements and convert physical indicators into signals that a mobile device can recognize.
Rear camera
The main camera of a mobile device is usually located on its back panel and may be combined with one or more secondary cameras.
| ISO (light sensitivity) The ISO value/number indicates the sensitivity of the sensor to light. Digital camera sensors operate within a specific ISO range. The higher the ISO number, the more sensitive the sensor is to light. | 100 - 1600 |
| Flash type The rear (rear) cameras of mobile devices mainly use LED flashes. They can be configured with one, two or more light sources and vary in shape. | LED |
| Image Resolution One of the main characteristics of cameras is resolution. It represents the number of horizontal and vertical pixels in an image. For convenience, smartphone manufacturers often list resolution in megapixels, indicating the approximate number of pixels in millions. | 1200 x 900 pixels 1.08 MP (megapixels) |
| Characteristics Information about additional software and hardware features of the rear (rear) camera. | Autofocus Continuous shooting Digital zoom Digital image stabilization Geographical tags Panoramic photography HDR shooting Touch Focus Face recognition White Balance Adjustment ISO Setting Exposure compensation Scene Selection Mode Macro mode |
| Interpolated resolution - 5 MP |
Front-camera
Smartphones have one or more front cameras of various designs - a pop-up camera, a rotating camera, a cutout or hole in the display, an under-display camera.
Audio
Information about the type of speakers and audio technologies supported by the device.
Radio
The radio of the mobile device is a built-in FM receiver.
Location determination
Information about the navigation and location technologies supported by your device.
WiFi
Wi-Fi is a technology that provides wireless communication for transmitting data over close distances between various devices.
Bluetooth
Bluetooth is a standard for secure wireless data transfer between various devices of different types over short distances.
USB
USB (Universal Serial Bus) is an industry standard that allows different electronic devices to exchange data.
Headphone jack
This is an audio connector, also called an audio jack. The most widely used standard in mobile devices is the 3.5mm headphone jack.
Connecting devices
Information about other important connection technologies supported by your device.
Browser
A web browser is a software application for accessing and viewing information on the Internet.
Video file formats/codecs
Mobile devices support different video file formats and codecs, which respectively store and encode/decode digital video data.
Battery
Mobile device batteries differ from each other in their capacity and technology. They provide the electrical charge necessary for their functioning.
| Capacity A battery's capacity indicates the maximum charge it can hold, measured in milliamp-hours. | 2000 mAh (milliamp-hours) |
| Type The type of battery is determined by its structure and, more precisely, the chemicals used. There are different types of batteries, with lithium-ion and lithium-ion polymer batteries being the most commonly used batteries in mobile devices. | Li-Ion (Lithium-ion) |
| 2G talk time 2G talk time is the period of time during which the battery charge is completely discharged during a continuous conversation on a 2G network. | 8 h (hours) 480 min (minutes) 0.3 days |
| 2G latency 2G standby time is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 2G network. | 400 h (hours) 24000 min (minutes) 16.7 days |
| 3G talk time 3G talk time is the period of time during which the battery charge is completely discharged during a continuous conversation on a 3G network. | 12 h (hours) 720 min (minutes) 0.5 days |
| 3G latency 3G standby time is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 3G network. | 400 h (hours) 24000 min (minutes) 16.7 days |
| Characteristics Information about some additional characteristics of the device's battery. | Removable |
Specific Absorption Rate (SAR)
The SAR level refers to the amount of electromagnetic radiation absorbed by the human body while using a mobile device.
| Head SAR level (EU) The SAR level indicates maximum amount electromagnetic radiation to which the human body is exposed when holding a mobile device next to the ear in a conversation position. In Europe, the maximum permissible SAR value for mobile devices is limited to 2 W/kg per 10 grams of human tissue. This standard established by the CENELEC Committee in accordance with IEC standards, subject to the ICNIRP guidelines of 1998. | 0.626 W/kg (Watt per kilogram) |
| Body SAR level (EU) The SAR level indicates the maximum amount of electromagnetic radiation to which the human body is exposed when holding a mobile device at hip level. The maximum permissible SAR value for mobile devices in Europe is 2 W/kg per 10 grams of human tissue. This standard has been established by the CENELEC Committee in compliance with the ICNIRP 1998 guidelines and IEC standards. | 0.828 W/kg (Watt per kilogram) |