How to cut a SIM card for a micro-SIM at home. Cutting a SIM card to fit a Micro-SIM How to cut a SIM card to fit a micro SIM yourself

For quite some time, users mobile communications We used regular format SIM cards, and there was no need to cut the SIM card to micro or nano format. However, the rapid development of mobile technologies has led to phones becoming larger and SIMs becoming smaller. Nowadays, most new devices use nano SIM cards.

You can cut a SIM card at home yourself, both to the micro SIM format and to the application, however, with the advent of new types of SIM cards, services have appeared on the market that allow you to make a micro or nano SIM from a regular one. Today, all new SIM cards from operators have a universal format and are suitable for use in any gadget.

Today we’ll tell you how to make a microsim from a regular mini SIM card and apply it: how to reduce the size using a template yourself, how much it costs to cut a SIM card in the salon, and whether it’s possible to do without cutting a mini sim to micro or nano, and get the one you need for free from the operator.

Trimming

Many users, using a mini SIM card, prefer to cut a regular SIM to microsim or nanosim with their own hands, or use card cutting at the salon. This option may have its advantages, although rather dubious. As an argument to convert your SIM card into micro and nano, many cite the fact that it is not difficult to do, and cutting a SIM does not take much time, unlike replacing it with the operator.

We’ll talk about the advantages of replacing the operator later, but for now we’ll talk about how to make regular sim ki nanosim card and micro sim card, how much it costs, and is it difficult to cut a sim card at home. There are two options for how you can cut a SIM card for micro and nano at home or in a salon, and there are no special conditions for this.

You can cut a mini SIM card at home without a special stapler for micro and nano, and the main thing is not to damage the SIM card chip using a template. You can cut any SIM card, and it doesn’t matter how many tracks there are on the chip - 4 or 3. Just print a micro SIM-card or nano template on a printer, attach your regular SIM card to it to get a micro and nano SIM card with your own hands.

If you have never cut a SIM card before, then when using a micro and nano SIM card template, you need to trim the extra edges of your card with a margin. In this case, the remaining excess plastic can be sharpened with a regular nail file, but “gluing” the excess back is impossible. To cut a mini SIM card into a micro at home, use a construction knife or stationery scissors.

The second option is to convert SIM into microsim and nano at home - using a stapler-cutter for SIM cards Micro/nano sim cutter. Buying it is not a problem, and you can order it both online and in accessory stores. However, in this case, the cost of cutting a SIM to fit a micro and nano card will increase in proportion to the cost of the stapler. Its price, depending on the model, can range from two hundred to five hundred rubles. Of course, it is illogical to purchase it just to cut it out from a regular micro or nano SIM.

If you can’t convert your SIM into a microsim without a stapler, then contact a specialist. For one hundred to two hundred rubles, they can convert a SIM card into micro or nano in a minute.

Replacement

Cut or change the SIM card - it's up to you. Many users mobile phones Having seen what micro and nano SIM cards look like, they think about getting the one they need from the operator as a replacement, or simply cutting off the regular one, because visually the only difference is in the amount of plastic framing the chip. However, if you ask the opinion of experts, then everyone will say that it is better to switch from a regular SIM card to using micro and nano by obtaining a new card from the operator.

What is a mini SIM card, and how does it differ from the newer format, and really, isn’t it better to just cut it off? Behind the external similarities lie completely different cards.

The cards of the new format use completely different chips, allowing not only to use more information on them, but also to enjoy high-speed data transfer. If you have an old regular card, then you will not be able to register your phone on LTE networks.

Also, the main question for any user remains how much it costs operators to replace a SIM card with a micro and nano one. The federal four, except Beeline, offer this service free of charge. At Beeline, the service is paid in the amount of thirty rubles, but when replacing an old card that does not support 4G, the operator will return the funds to the balance in the form of bonuses.

To get a new card, you just need to come to your operator’s office and receive a new SIM card after filling out the application. For this you will need a passport. New SIM card can be used in all three formats by simply separating from the base of the desired size.

The iPhone does not use regular SIM cards, but smaller ones - micro-SIM and nano-SIM. For what? For a very simple reason - Apple and other developers do this to save space, and therefore to reduce the thickness of the device. And if you want to have a thin gadget, you will have to reduce the size of the standard SIM card. It may seem complicated, but it's actually not that bad. In order to cut a SIM card for Micro SIM and Nano SIM, you need to contact a special center or do it yourself. Now we’ll find out what you can do on your own if you have such a problem.

There are several options:

Order new map in your mobile phone store mobile operator. This a good option, however, it takes time and effort to get there and place an order. The advantage is that you don’t need to trim anything, and it will be free. The downside is that this is time and there may be a queue at the mobile phone store.
When you buy new phone, the sales assistant can cut your SIM card with a special tool, but this service may be paid. And even then, this is provided that you buy in an offline store, but what if in an online store? Have questions. You can buy a card cutting tool yourself, but is it worth it? Maybe there is another option? Yes, and I hope you like it!
Independent sim card cutting hill. You can save time and money if you cut your SIM card yourself to fit a micro-SIM card or a nano-SIM card - the one you need. How to do it?

Micro-SIM is one of the types of SIM cards, which has reduced dimensions compared to a regular one: 15 × 12 × 0.76 mm. How to make a Micro SIM card?

Take a pencil and a ruler and measure 12 millimeters by 15 on your SIM card. It is better to turn the card with the contacts towards you. If you are afraid of incorrectly drawing the outline along which you need to cut, then it is better to print out the template and cut according to it.
Take sharp scissors - preferably small, manicure scissors - or a knife and cut out a micro-SIM card along the drawn contour.
If there is excess left, you can carefully remove the remaining plastic with sandpaper or, if you don’t have one, use a nail file.
Your Micro-SIM is ready. Insert it into your gadget and use it.

But what if you don't want a micro-SIM, but a nano-SIM? How do they differ and how to get a card of the right size?

Nano SIM is one of the types of SIM cards with the smallest dimensions: 12.3 × 8.8 × 0.67 mm. It began to be used quite recently, for the first time - in 2012 in the iPhone 5. The nano-SIM is the size of the chip, which makes the cutting process a little more difficult - there is a risk of damaging the contacts. How to make a SIM card for Nano SIM?

Better download and print the template. It's easier to cut through.
If you do not have this opportunity, then take a pencil and use a ruler to draw a contour of 12.3 millimeters by 8.8. It will be almost a chip.
Trim off the excess with sharp scissors and file the edges without touching the chip itself, otherwise it can be damaged.

A nano-SIM can be cut not only from a SIM card, but also from a micro-SIM card, because it is smaller than them - the nano-SIM is the smallest in size. You can download and cut.

If you are afraid that you will cut out a micro or nano SIM card, and then you will need a larger SIM card, then do not worry - in this case, you buy an adapter that serves as a kind of adapter, and there is no need to buy a new SIM card and use it as regular or re-cut for a micro-SIM card.

For which phones do you need to cut the SIM card?

The micro-sim is designed for iPhone 4/4, and the nano-sim is used in iPhones starting from 5/5s, i.e. iPhone 6, iPhone 6S, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone Xr, iPhone Xs and iPhone Xs Max.

So, we found out that the SIM card can be cut both in the communication store or store where you buy the phone, and at home, which will help you save time and money. Which option to choose is up to you. If you are afraid to cut out the card you need, then for courage you can watch a video on how to make it, how to get it, or how to cut it out. Then everything will definitely work out for you.

17.06.2018

We independently reduce the SIM card to the required size

The time for everyone’s favorite “bricks” and sliders has passed. Their mesmerizing games and ringtones remain only in our hearts.

It's time for new innovations and Cell Phones acquired completely different functions and, of course, appearance. Nowadays, many gadgets can only use micro-SIM (smaller standard SIM) or nano-SIM cards.

Many are perplexed due to the fact that their old SIM card from a shabby and small phone is completely unsuitable for a modern gadget.

Many people try to squeeze a SIM card they already love into a slot that is not suitable for it, they call their advanced children or friends with the same question - I bought a new phone, I was very pleased, but my SIM card does not fit at all!

He is advised to immediately change the SIM card, but do not rush to do this, because today we will talk specifically about the micro SIM card. Namely: how to make it from a regular SIM card and what to do if nothing comes of it.

Of course, first you need to realize that nothing will happen to our SIM card and it will serve you faithfully for a long time if you stay clear follow written instructions. So, finally, we are starting training on how to transform an old SIM card with our own hands standard sizes to a micro SIM card.

Let's start with the fact that the dimensions of the micro-SIM card should be within 15x12 mm. You can cut a regular SIM card to this size as follows.

What do we need for this difficult and risky undertaking? And we will need:

sharp nail scissors;
well sharpened pencil;
ruler;
Of course, patience is probably the most important thing here.

Now let’s move directly to the so-called “adjustment” of a standard SIM card to a micro one.

So, let's put our SIM card chip up on a flat and dry surface table. After this action, we will need a very ordinary ruler (take one on which all the millimeter markings are clearly visible, because in this case we will need exactly them).

We carry out “from above”(we will consider the top to be the place where there is no cut corner) of the SIM card, a line 12 mm long, departing from the edge by approximately 1.4 mm. (try to keep the millimeter exactly). Now from the edge of the resulting line we measure down (to the place where we have a cut corner) a similar line, only 15 mm long. (at the same time, retreating from the edge 1.8 mm).

Connecting the resulting lines into a rectangle - in the end we should get it with dimensions of 15mm. horizontally and 12 mm. vertically. (you must strictly ensure that the chip is not touched. If this happens, then under no circumstances touch it when performing the circumcision; it is better to step back a little to the side).

Then carefully cut out this rectangle scissors. All that remains is to cut off the unnecessary corner (you can attach the unnecessary cut part to the new micro-SIM and, drawing a line along it, cut off the unnecessary part).

Now we need to check whether our new SIM card is included in the smartphone. If some of its parts protrude and do not allow it to lie flat in the connector, then we will use sandpaper or a regular nail file, grinding off the interfering areas of the micro-SIM card.

You can also use more simple method , but for this we will need a reliable friend with an existing micro-SIM card! In this case, you just need to remove the existing micro-SIM and “overlay” it on our standard SIM card.

Then, with a sharp pencil, we outline the outline of the micro-SIM and, having removed it, we also carefully cut the SIM card using sharp scissors or a stationery knife. By the way, It is better to cut carefully because the “unnecessary part” can be used in the future (by simply “inserting” a micro-SIM card into its “old shell”).

It is also necessary to remember that if the size of our SIM card is slightly larger than necessary, this can always be corrected.

If the micro-SIM card is made smaller, then it is simply will be spoiled and you can only throw it away (therefore, it is better to cut a standard SIM card into a micro one with a little reserve, which, if unnecessary, can always be either cut or ground off using the same sandpaper or nail file).

If you still weren’t able to turn a regular SIM card into a micro-SIM, or you just don’t really want to bother with it, don’t worry! You can always replace a regular SIM card with a micro-SIM at any office of your operator by presenting your passport, or ask the salon staff to cut out the necessary one from the old SIM card.

But there are times when, on the contrary, we need from a micro-SIM card make a standard one. For such situations, there is a special adapter for a micro-SIM card, which can be purchased at any communication store. Then your SIM card will become universal and will fit any device!

We hope that our tips helped you dispel your doubts that it is impossible to make a micro SIM card yourself from a standard SIM card! Follow the algorithm exactly, try to comply with all sizes and you will certainly succeed!

Today, a regular SIM card for many phones may already be outdated, since, for example, the fourth iPhone model only supports a new format. Of course, you can simply replace your SIM card with a micro one by buying it in a store, and the problem will be solved. But then all the contacts of friends and acquaintances that are recorded on the number will be lost. In addition, there is probably a profitable one connected to it tariff plan mobile operator.

As they say, there is always a way out. A micro-SIM card can be obtained from a regular SIM card by reducing it (not the number of contacts, but the amount of plastic around them is reduced) by trimming. In this case, the model functions in the same way as the standard version.

How to cut a standard SIM card to fit a micro one

This will require a little free time and patience, as well as the appropriate tool:

sandpaper
pencil
ruler
sharp scissors

The working surface should remain untouched; only some part of the protective casing is cut off.

Dimensions

Trimming process

All information is stored on a chip that is half the size of the plastic casing, so by getting rid of extra millimeters, you can easily turn a standard SIM card into a micro SIM card.

The first step is to make a marking according to which the card will be cut. Using a sharp pencil, a rectangle measuring 15x12 mm is drawn around the chip. Sometimes there are enlarged SIM cards, which will have to be cut according to the foil. This will be a little more difficult to do, but if you perform this procedure carefully, you can get an excellent micro-sim.
Then a part of the plastic is cut off with sharp scissors; for this it is better to use small manicure scissors, as they are small in size and quite sharp. Once the process is complete, a small corner of the card is trimmed.

Bringing a cut SIM card to perfect condition

After cutting your card, compare its size with the slot in your mobile device where it will be inserted. All joints must meet perfectly, otherwise it will need to be trimmed somewhat again. Next, sandpaper is used to remove excess.

As you can see, this procedure does not require any special difficulties, so do not be afraid of it, pick up the tool and act. If you still do not dare to do this yourself, you can go to service center, where your SIM card can be easily corrected using a special tool that looks like a stapler. But you'll have to spend it certain time, and the service will not be free, while this procedure does not require much complexity.

From year to year mobile technologies are improving, smartphones are getting bigger, and parts are getting smaller. Manufacturers strive for minimalism of details and maximalism of displays. The changes also affected SIM cards, which have undergone changes since their inception. Today we will tell you how to properly cut a SIM card, adapting it to a new device. But first let's study existing species SIM cards

Types of SIM Cards

Have you ever wondered why SIM cards are sold built into a large plastic base? Let us tell you a secret - once upon a time this was a SIM card! Yes, it’s so big and inconvenient, but phones at that time weren’t exactly small. Back then it was considered an achievement that a telephone could work wirelessly, and few people were interested in the size of the card with which calls could be made.

Time passed, the devices changed, large SIM cards were replaced by mini-SIM cards, which today we are accustomed to consider ordinary. Further - less. Mini-SIMs are becoming less and less common, and new devices are starting to use micro-SIMs. And, it would seem, much less? But Apple decided to shrink the cards for its devices - and nano-sim appeared.

If you decide to purchase a new SIM card today, when you open the package, you will find a card with several cuts. You just need to select the required SIM card size - and press in the right place - and you have in your hands a card suitable for your device. And if you want to move it to another device, just save the remaining parts and use them as an adapter.

Cutting a SIM card

But what to do if you have an old-style card (mini-SIM)? Then regular pruning can come to your aid. But the question arises, how to cut a SIM card? There are several ways to transform a map into a new format:

contact the communication salon. As a rule, they have special devices - SIM card cutters. For a fee or without it (depending on your luck), they will help you resolve this issue - and adapt the SIM to your device.
trim the card yourself.

Cutting a SIM card with your own hands

Let's look at the second method in more detail and tell you how to cut a SIM card at home. To accomplish this task, you need to have a pencil, ruler and sharp scissors on hand. For subsequent adjustment of dimensions, you may also need sandpaper, since cutting small parts is not very convenient.

First you need to decide on the size of the card you want to get as a result. If you need to cut a SIM card for a micro SIM, then its dimensions should be 1.5 * 1.2 cm, if for a nano SIM, then you should be left with a rectangle with sides 1.23 cm and 0.88 cm. After that Once you have decided on the dimensions, it is worth drawing the contours of the future SIM card on your source card. And only after that, carefully, without touching the chip, cut the card.

If the first fitting was unsuccessful and the SIM card turned out to be slightly larger than necessary, continue trimming. If there are literally a few millimeters left to remove, it is better to use sandpaper. The most important thing is not to touch the contacts during processing, since if they are damaged, the card will simply stop working. Cutting under Nano Sim is much more difficult than under Micro Sim, since there is much less plastic around the chip, and therefore it is much easier to hit an important part. Therefore, be careful and do everything without haste.
When the trimming is completed, you can safely insert your SIM card into the device and use it.

If you need to install a smaller card in a device designed for a larger SIM size, you can use a special adapter.

We hope that our tips were useful to you. And congratulations on purchasing a new smartphone!