Samsung s5250 firmware bada 2.0. Latest firmware for Samsung s5250 phone. What is needed for firmware

Update firmware version Samsung phone Wave 525 is possible by yourself, but keep in mind that this must be done carefully, following the instructions. The slightest inaccuracy, and the wave 525 firmware can end in failure both for the phone and for its owner! The link where you can download the firmware is given in the “Required firmware conditions” section. For those who are uncomfortable using step-by-step text instructions, at the end of the article there is a video on flashing the phone’s firmware.

Necessary conditions for firmware

Before you start updating the firmware on your smartphone, you need to make sure that:

  • Samsung Wave 525 battery is fully charged
  • a MicroUSB cable has been prepared for connecting to a computer
  • MultiLoader application downloaded to your computer
  • Samsung Wave 525 Bada firmware downloaded, for example, from here
  • drivers installed

Firmware process

If you have done all of the above, you can proceed directly to updating the wave 525 firmware.

Step-by-step process instructions:

  1. Turn your phone into download mode (DOWNLOAD). To do this, hold down the “power”, “volume up”, “camera” buttons on your phone.
  2. Turn on the MultiLoader program on your computer
  3. In the open application, opposite the buttons BRCM2133;Boot Change;Full Download, check the boxes
  4. At the next stage, you need to select the files with the firmware. The table below identifies the buttons and their corresponding files or folders

Button

Folder/file
Boot BOOTFILES folder
Apps apps_compressed.bin
Rsrc1 Rsrc_S5250_Open_Europe_Slav.rc1
Rsrc2 Rsrc2_S5250(Low).rc2
Factory FS FactoryFs_S5250_Open_Europe_Slav.ffs
C.S.C. CSC_S5250_Open_Europe_Slav_SER.csc
SHP APP ShpApp.app
FOTA bplib_S5250OpenEuropeSlav.fota
  1. You need to enter the phone into DOWNLOAD mode and connect it to the computer. First of all, decide on the com port. Then click on the Port Search button, the message should appear on the screen. If there is no sign, make sure that all drivers on your computer for connecting the phone are installed correctly. After the message appears, click the Download button.
  2. Update process software launched, wait a few minutes until the application itself installs the necessary files on the phone
  3. After you restart your phone, you can disconnect it from your computer.

It's no secret that the lion's share of attention is paid to top-end smartphones, which amaze everyone with their sky-high functionality and equally sky-high prices. However, despite everything, sales are mainly formed not due to these miracles of technology, but thanks to touch phones from the inexpensive category. One of these is the Samsung Wave 525, which will be discussed in this article.

General information

We can conclude that this particular phone is a representative of the heirs of a once very popular phone Samsung Star. This conclusion follows from several characteristics that are visible when you first look at this model with the naked eye. Firstly, this is the model index. Wave 525 is designated S5250, while Star was known as S5230. The second argument in favor of this conclusion is the appearance of the device, which is quite reminiscent of the appearance of its predecessor.

However, there is still a difference between these two models. Samsung Wave 525 is manufactured on a more modern platform and also has slightly better functionality.

Specifications

First of all, it is worth noting the fact that the device is made in the form factor of a keyboardless candy bar. The Samsung Wave 525 smartphone operates in the GPRS/GSM/EDGE 850/900/1800/1900 bands. The phone is based on the operating Samsung systems bada 1.1 and has TouchWiz 3.0 interface. The display of the model is a capacitive matrix with support for the MultiTouch function, and the screen resolution is 240x400 pixels. According to the technical specifications, the phone has a built-in 3 MP camera that supports QVGA video recording and geotagging.

In addition to the built-in memory, which is 90 MB in size, the user can use microSD/HC cards in order to fully use the potential of the Samsung Wave 525 phone. The characteristics also indicate that the owner of such a gadget can safely connect to wireless technologies for data transfer. It is also possible to enjoy multimedia functions, which include not only the basic set, but also provide the opportunity to integrate with popular YouTube service and use the Find Music service. In conclusion, it is worth noting that GPS technology is implemented in Samsung smartphone Wave 525. And the dimensions of this model are quite small - the phone weighs 100 grams, and its dimensions are 110x55x12 mm, which allows it to fit comfortably in the user’s hand.

Samsung Wave 525. Appearance and design characteristics.

At first glance at this model, you will notice a small candy bar with a large The materials from which the smartphone is made are quite practical. Plus appearance is that back cover made with a pattern of raised dots, which allows you to more successfully disguise the presence of scratches.

The controls are located in the usual touch phones manner. At the bottom of the model there are calls and a key with which you can return to the main menu. On the left side, the manufacturer placed the volume keys, made in the form of a rocker, and on the right there are buttons for locking the main screen and turning on the camera of the Samsung Wave 525 phone.

Reviews that are easy to find say that this arrangement of controls is quite convenient and plays a positive role when choosing a phone model. Connectors for charging the device and connecting headphones are located at the top of the phone.

Screen

This phone model uses touch screen with a resolution of 240x400 pixels, which was already mentioned in technical specifications. The quality of the TFT screen used is decent for the price category to which the Samsung Wave 525 belongs. However, it should be noted that the only drawback it has is that in bright sunlight the screen becomes almost completely blinding.

The sensor is made using capacitive technology with support for multi-touch functions. The sensitivity level is quite high, which does not cause any inconvenience when using this phone model.

Battery

The battery life will pleasantly please the user. With a small number of calls made, but taking into account active use network functions that can offer this model, the phone's battery can ensure the phone's operation for up to 3-4 days, which is significantly higher compared to phones based on Android OS.

Interface and main menu

In the Samsung Wave 525 phone, the screen customization is done at a decent level. The characteristics of the smartphone provide support for up to 10 desktops, each of which can contain an unlimited number of widgets. The setting is started by clicking on the button with the image of a gear. Also operating system smartphone allows you to support the notification area function.

Activation occurs by clicking on the status line in the phone's operating mode. In this area, not only messages about new events are displayed, but also quick control of phone modes, wireless functions, as well as the ability to quickly and comfortably control the player or receiver if they are working.

Phone lock screen

Please note that first of all it is necessary to carry out some preparatory work that will not take much time and will not distract from other matters. In order to prepare for flashing your phone, charge the battery to the maximum, and also install a program called “MultiLoder” on your personal computer or laptop. Its use automates the firmware process and will help avoid many problems.

Once the preparation is complete, you can move on to the process itself. To save your data and make the software installation process even safer, remove the SIM card and memory card from your phone.

Put your device into data download mode. It turns on with the following key combination: simultaneously press the camera activation button, the power key and the volume up button. The combination must be held until a message appears on the device display indicating that the download has begun. At this stage, it is still possible to interrupt downloads and software updates by simply removing the battery from the phone.

Once the download starts, you cannot interrupt the process, otherwise it will affect its performance and disrupt the operation of low-level firmware. After this step is completed, the phone must be connected to the computer on which the Multiloader was installed. The program will automatically recognize the device model and begin the download process. As soon as the data is copied, the phone will reboot. Please note that if you follow these steps correctly, your phone will work again and will turn on again without any problems.

Finally

As you can see from this article, the Samsung Wave 525 is a worthy representative of low-cost smartphones. The developers endowed it good functionality, adding to this the ease of use of all the functions that the user deems necessary. In addition, the OS of this smartphone allows you to solve the problem of turning it on and losing its functionality quite in a simple way, which will allow you to save your time and money. In other words, Samsung Wave 525 is the smartphone that will be appreciated by users who put performance first.

Articles and Lifehacks

Firmware for Samsung wave 525 is a responsible process. If you do not feel very confident with the equipment, then perhaps it is better to entrust it to the service center specialists.

They won’t charge a lot of money for this, but they can save a lot of nerve cells.

Preparing for firmware

  • Let's start with the devices you need. After all, the firmware requires some equipment and software, we will describe it.
  • You need to have a personal computer, the MultiLoader program, the latest firmware version, a phone to be flashed and a cable to it that connects mobile device with a computer.
  • Before the firmware operation, it is strongly recommended to do backup copy data, which will greatly help you in case of unsuccessful update. Also remove first SIM card and a memory card.

Sequencing

  1. In the program, check three boxes next to the items: BRCM2133, Boot Change, Full Download. Next, through the “BOOT” item, select the folder with the firmware and connect the files from it, each item in the program has its own file.
  2. For the “Amss” item – the file amss.bin, for the “Apps” item there corresponds the file apps_compressed.bin, and in “Rsrc1” we select a file with the extension rc1, respectively in “Rsrc2” with rc2, if there are several files with the extension rc2, then we select the option Low.
  3. In the “Factory FS” item we substitute a file with the ffs extension. And in “CSC” with the extension csc. In the line of the item “SHP APP” - the file ShpApp.app. Leave all the lines below blank.
  4. The phone must not be connected to your personal computer. Turn it off and run it in “ Download Mode" To do this, you need to hold down three buttons: “Volume down button”, “Lock” and “Phone power”.
  5. After that, connect the phone to the computer with a cable. In the MultiLoader program, you need to press the “Port Search” button and wait until your phone is identified in the program.
  6. Then click the “Download” button and wait for the process to complete. When the firmware is finished, the program will display a corresponding message, and the phone will reboot itself.
  7. If you installed official firmware, then after updating it, make a preconfiguration for the corresponding firmware region.

Hello, today I will show you how to flash, aka Wave 525, there is nothing complicated about it. Every time I write a post about Samsung, I always try to first update the device’s software via kies and write about it, but nothing always comes of this idea, there are some errors, then the model is not supported, or everything freezes.

In short, I have never been able to update properly over the Internet.

Although this service was designed to make life easier for end users. Often, they bring devices that have stopped turning on after an unsuccessful software update procedure via the Internet.

But in fairness, I’ll say that for the most part, the user himself is to blame for this - either the computer rebooted during the process, or the Internet was turned off, or they didn’t wait for completion and pulled out the cable... But oh well.

So, what about WAVE 525- this is another badafone from the low-budget segment touchscreen smartphones. There was a time when this device was brought in “packs” due to the fact that during use it at one point stopped turning on, namely, it began to load until the splash screen and turned off, and so on in a circle. This is a firmware bug. Our device is no exception. So let's get started...

ATTENTION!!! Before starting software updates, rooting, resetting settings and other manipulations with your own or, God forbid, someone else’s device HIGHLY RECOMMEND read this one. In short, you have been warned and don’t say later that this is the first time you’ve heard this.

Samsung GT-S5250 software update.

For the firmware we need the following:

  • A device with a charged battery;
  • MicroUSB cable included;
  • Firmware - XEKJ3 regular or S525WXEKJ1, if you have LaFleur(S5250W);
  • Stitcher - MultiLoader_v5.64_BCOM;
  • Drivers - install kies (when updating the software, do not run this application) or try installing;
  • Computer - I, as usual, used an office computer on WINXP SP3;
  • Time - 10 minutes for everything))).

Before you begin, save all important information from the phone to alternative data storage sources (if this is possible, of course).

Step 1:Enter the phone into DOWNLOAD mode by holding down the following buttons on the device in turn - camera button + volume down button + power button.

Step 2:Launch the MultiLoader_v5.64_BCOM application.

Step 3:This is what a running flasher looks like.

Step 4:Click the Boot button and select the BOOTFILES folder from the folder with our firmware.

Step 5:Click the Apps button and select the apps_compressed.bin file from the folder with our firmware.

Step 6:Click the Rsrc1 button and select the Rsrc_S5250_Open_Europe_Slav_Navi.rc1 file from the firmware folder.

Step 7:Click the Rsrc2 button and select the Rsrc2_S5250(Low).rc2 file from the firmware folder.

Step 8:Click the Factory FS button and select the file FactoryFs_S5250_Open_Europe_Slav_Navi.ffs from the firmware folder.

Step 9:Click the CSC button and select the file CSC_S5250_Open_Europe_Slav_Navi.csc from the firmware folder.

Step 10:Click the SHP APP button and select the ShpApp.app file from the firmware folder.

Step 11:Set all settings as shown in the picture above. Put your phone into download mode and connect the cable to your computer. First, the com port must be determined (387 in my case). Then press the Port Search button - the message should appear - The phone will be detected by the flasher only if the drivers are installed normally in the system. That's it. Now feel free to click on the Download button. The software update process will begin.

Step 13:The firmware is completed. The phone will be configured and it will turn on.

Step 14:Check the current software version by typing the following code *#1234# on your phone keypad.

Pre-Configuration Samsung GT-S5250.

Now we need to do the preconfiguration of our phone - the setup I talked about. I tried to make a video of the preconfiguration, but it doesn’t seem to work very well for me, so don’t scold me too much)))

Explanations for the video:
First enter the following code on your phone - *#5239870*#
Select pre-configuration
Enter another code *#27236*# in the Operator Code section and click Yes
Select region SER - for Russia
Save and exit
Next, you need to reset the settings by entering the code *2767*3855# - the device will reboot

So we learned how to flash .

P.S. If you encounter any errors during the firmware process or the device does not want to be detected by the computer at all, read this. It describes typical problems and errors that novice users often encounter.

Share: