Disassembling Sony Xperia Z5 - detailed instructions. Disassembling Sony Xperia Z5 - detailed instructions for Sony Xperia z5 on how to remove the back cover

New line Sony Xperia Z5 received not only a new concept and a number of serious external changes, but also from an engineering point of view it has reached a new level of performance. The internal layout of the Xperia Z5 looks much more elegant and thoughtful than in previous generations of flagships. If you don’t believe me, then look at past materials like this:

To understand how much the quality has increased, you just need to look at the disassembly pictures of the Xperia Z5 and detailed photographs of the interior of the case. The guys from the Vietnamese fansite SonyFan did an excellent job and captured all the internal elements (as well as individual parts) of the new Xperia Z5 in excellent quality.

Dual copper heatpipe in place, with plenty of thermal paste. This solution completely solves the problem of excessive heat generation of the Snapdragon 810. In the new overheating tests, the Xperia Z5 and Xperia Z5 Compact heat up even less than previous models:

Main and front Xperia cameras Z5. The main camera has a 23 MP sensor, 1/2.3″, F / 2.0 aperture, 6 lenses, 0.03 sec hybrid autofocus.

The power button has a unique Qualcomm Sense ID fingerprint sensor built into it.

Lithium-ion battery manufactured by Sony with a capacity of 2900 mAh.

This detailed instruction clearly demonstrates how to disassemble the Sony Xperia Z5 Compact. Everything is described and supplemented with photographs of the process, and at the end there is a detailed step-by-step video of disassembly. The instructions will be useful primarily for those who carry out repairs or are not afraid to do so and, in the future, relying on this manual, will be able to replace components of a compact smartphone. It is worth understanding that the material is presented for informational purposes and is not a call to action - in any case, you carry out all actions at your own peril and risk.

If you become the owner of an Xperia Z5 Compact and accidentally break it back cover or display, then using these disassembly instructions you can repair your smartphone yourself. To do this, you will need some tools: a powerful hair dryer, if possible a pair of suction cups, tongs, several sticks with a flat end and records or picks (they should be plastic so that you do not break anything). Often, some parts, such as displays and back covers, already come with all the tools described above, except for the hair dryer, of course. But you can also buy them separately or use improvised means.

1. Disassembly of Sony Xperia Z5 Compact begins with the fact that you need to turn off the smartphone and remove the SIM card and microSD tray.

2. Heat the back cover, or rather its edges, with a hairdryer so that the glue melts and you can carefully pry it off. Pull part of the lid a little and gradually warm up and move the pick along the contour.

3. Unscrew the 10 small screws and unfasten the clamps of the LED flash and NFC module.

4. Remove the plastic bracket, and then take out the plastic frame.

5. Disconnect and remove the front camera module.

6. Disconnect and remove the speaker.

7. Now disconnect and remove the main camera module.

8. Remove the bottom speaker.

9. Unfasten the USB connector, take out the side plastic plate and carefully lift the bottom part of the board from below. But do not pull sharply and be careful, as there are two more cables under it: one connects the display, and the other is a block with buttons, microphones and vibration.

10. Press the audio connector a little and remove it, after which you will be able to bend the motherboard to the side and disconnect the display cables. After this, you can safely remove and set the motherboard aside. (If you are using the instructions to replace the screen, you can skip directly to step 18).

11. If necessary, disconnect the waterproof audio connector and LED flash.

12. You can also detach the microphone from below.

13. Remove the NFC module from the battery.

14. The battery itself is attached to the motherboard using adhesive tape.

15. This is what the motherboard itself looks like.

16. Now you can remove the waterproof microUSB port.

17. To get the remaining elements, you will need to carefully loosen the glue on them (by lightly pressing and picking, of course, very carefully). We loosen the vibration motor, the side buttons (especially the power key with a fingerprint scanner), and the noise reduction microphone. You also need to loosen the glue of the tire itself, after which you can carefully remove the panel containing all these elements.

18. The main disassembly is complete. Now let's move on to disassembling the display. By analogy with the back cover, warm up the edges of the screen and disconnect the screen module, because its cable has already been disconnected from the main board.

19. Congratulations, you have completed the disassembly!

To assemble the Sony Xperia Z5 Compact, do all the steps in reverse order.

Perhaps you were looking for instructions for the flagship:

In contact with

Contributed by the iFixit community detailed instructions, how you can properly disassemble the Xperia Z5 right down to the screw. The detailed process itself was captured in photos and videos. This made it possible to make, therefore, a small guide, which will be especially useful to those users who have “golden hands” and if something happens, they will not be afraid to replace any internal part of the Sony Xperia Z5 with their own hands, without contacting , V service center. Many readers, thanks to this kind of instructions, quite successfully repaired their own smartphones on their own.

Of course, if the smartphone still has a warranty and its period has not expired, you do not know the specific cause of the breakdown, and the feeling of fear self-repair does not leave you, then the right decision would be to turn to specialists for help. As for everyone else, there is a step-by-step detailed disassembly of the Xperia Z5, with a fairly detailed description of the entire process. What is required to complete such a process? You will need the following tools and devices: a powerful hair dryer, a small shaped screwdriver, tweezers, a suction cup, and a stick with a flat end. Often, some specific spare parts are equipped with just such a list of tools. For example, display modules or back covers.

Now you can proceed directly to the disassembly process Sony Xperia Z5.

Stage one. The tray for microSD and SIM card is carefully removed.

Stage two. It is enough to heat well along the outline of the edge of the back cover. This is necessary for the glue to melt. Then, using a suction cup and an object with a flat end, you should pry it up a little.

Stage three. Using the same stick with a flat end or several, you need to run it along the entire outline of the lid and then separate it from the frame and remove it.

Stage four. It is necessary to disconnect the cable connecting to the battery. Next, you need to pull the small tape at the bottom and carefully remove the battery.

Stage five. From the board you should disconnect the cables connecting the front camera, the main camera, the main connector (circled) and the audio connector. Then unscrew the screws and remove the plastic bracket.

Stage six. Remove the metal speaker cover (the one on the bottom), unscrew a couple of screws that hold the plastic frame element, then remove this element.

Stage seven. Remove small frame. You need to be extremely careful because this is where the fingerprint scanner plug is located.

This frame has a vibration motor and a speaker.

Stage eight. You need to remove the main camera.

Stage nine. Remove the small cover and remove front camera.

Stage ten. At the bottom you need to disconnect the connection connectors motherboard, then remove it.

Stage eleven. Remove the cover from the audio connector. Using tweezers on the top of the microphone and audio jack, remove the glue. Next you need to remove the module.

Exactly like this appearance him.

Stage twelve. Thoroughly remove the adhesive from the upper speaker and remove it.