Chinese Samsung s6 firmware. The best custom firmware for Samsung Galaxy S6 and S6 Edge. Beginning, preparatory moments

They are one of the best-selling and most successful, thanks to their attractive prices and more.

The Chinese and Korean copies of the Galaxy are copied to the smallest detail; with the naked eye they cannot be distinguished from the original.

If you bought a high-quality fake, you will need the copy firmware Samsung Galaxy S6 SM-G920F.

Why is this needed and how is it done, you ask? This is what will be discussed in today's publication.

Why do you need firmware for a copy of a smartphone?

Beginning smartphone users do not quite understand what the word “firmware” means. For most, this word is mysterious. In fact, everything is simple, this is how you can make the settings.

Every smartphone, including the Samsung Galaxy S6, runs operating system(Windows, Linux, iOS, Android, etc.), similar to modern computers.

The operating system in them, in other words, is the “brain” that controls them. Without it, any gadget can be called “dead hardware.”

In smartphones, the operating system is stored in internal memory. It needs to be installed, this procedure is called “firmware”, where the system is flashed (written) into the internal, permanent memory, in simple words– settings are made.

Now let's look at how to set up a copy of the Samsung Galaxy S6 SM-G920F?

Beginning, preparatory moments

Before you start flashing your smartphone firmware, download it to your PC. necessary programs and files. There is a program that can be used in official server Samsung - Odin v3.09. Or choose any others.

You will also need drivers. This is necessary to connect the phone to the PC.

Finally, download the firmware you like for your Samsung Galaxy S6 SM-G920F. For example, G920FXXU4AOCV_6.0_marshmallow.

Instructions

  1. Unpack the firmware program and the firmware itself into any of the folders.
  2. Run the Odin v3.09 program (this is done as an administrator).
  3. Arrange the files in this order: in the BL field - the BL file, in the AP - the AP file, in the CP - the SP file, in the CSC - the CSC file.
  4. Put your smartphone into firmware mode.
  5. After this, connect the SGS 6 to the PC. At the same time, the firmware program begins to recognize the smartphone and the ID: Com inscription in the upper left corner lights up in blue.
  6. Press the “Start” button.
  7. The process starts Samsung firmware Galaxy S6.
  8. Monitor the progress of the process in the log window.

How long does it take?

Very little. Firmware installation lasts from 4 to 20 minutes, it all depends on the capacity of your personal computer. Once the process is complete, the phone will reboot on its own. Done, the process is complete.

If for some reason your device is not recognized personal computer, reinstall the driver. You can also change the USB cable or try using a different USB portal.

As you can see, flashing a copy of the Samsung Galaxy S6 SM-G920F is not difficult. I think you managed to figure everything out.

Korean and Chinese copies of Samsung Galaxy can be configured by any user independently and quickly enough.

❗ We are looking for a runaway firmware: A208_8G_mula_V2.0_V01_2015-12-08 (software version according to data from build.prop). If you find it on your device, immediately report it to QMS, or post a ROM dump in the topic!

MT 6735; GSM/ EDGE/ UMTS/ GPRS/ HSPA+/ HSUPA/ TD-SCDMA/ EVDO/ LTE Cat.4 (2/3/4G)

The same problem, but one of the devices turns off at 15%, most likely the battery needs to be calibrated; it is simply not charged to 100% but about 60%, then the phone simply does not have enough energy to work.

MT 6572; 1.3GHz - DualCore ARM Cortex-A7 | 32bit SingleChannel - 266MHz LPDDR2.

If you managed to get Root access using "KingRoot", it is advisable to replace it with the Super-Sume application.

! "Phone Information" from "MTK Droid Root & Tools" is only accepted as a supplement to the following.

Requirements for formatting your question in a post: Provide detailed description problems and, if any, the reasons for their occurrence.

After loading into the system - install SuperUser, run it and update binary file. Done, root received.

Enter "Settings" -> "About device" -> quickly tap on the build number until the splash screen appears. The "Developer" menu will appear in the settings, go to it and "Allow USB debugging"

With a working device, you must provide the file data: (1) "build.prop" and (2) "dumchar_info" (EMMC) or Block Map from MTK.D.T.

What’s funny and pleasing is that the warranty for our device is not in danger!

Example: sdk=17 - 4.2.2 Jelly Bean || sdk=19 / 20 - 4.4.2 / 4.4.4 Kit Kat || sdk=21 / 22 - 5.0.2 / 5.1.1 Lollipop . This will be the version of Android available in the device.

MT 6735; 5Mp + 13Mp.

PS: The screen can be obtained by combination by simultaneously pressing: “Power” and “Home” or “Power” and “Vol-”. (no need to hold)

People! Please post what firmware version is on this device?!

_ _ _ ______________________________________________________ _ _ _.

Good device. I compared it with the original, of course there is a significant difference.

MT 6582; 5.1" 720*1280.

MT 6572; 0.3Mp + 5Mp (NAND - 0.3Mp + 3Mp)

Do not flash the device - hoping that the problems will disappear, the chance of a successful outcome is 50/50.

157 g (original 138 g)

PS: There is a microSD slot, but it is difficult to access - you need to peel off the back cover and, in some cases, unscrew the motherboard.

Next, run MTK.D.T. , connect the phone to the PC, wait for it to be identified in the program and click the "Block Map" button

MT 6571; 1.3GHz - DualCore ARM Cortex-A7 | 32bit SingleChannel - 266MHz LPDDR2.

Option - I:

Don’t forget, there are no people on the resource with psychic or telepathic abilities.

MT 6571; 0.3Mp + 3Mp.

MT 6572; 4Gb (NAND - 512Mb)

My device has firmware for one SIM card, number G920FXXU1AOBN V 0.2.1 EN.

The desire to destroy the Good is welcome. Because Benefits are Big Lags, life is glitchy with them. And let's live together.

Consistently press and hold the "Vol+ & Power" or "Home & Power" buttons, when the device logo appears - release the "Power" button, hold the second button until Recovery loads.

Describe what actions were taken to resolve the problem.

MT 6572; 512Mb (NAND - 256Mb)

I'll post a backup of mine. Normal, fast, but 1.5GB. The excess can be removed.

If the device is completely inoperative: disassemble it and provide pictures motherboard, on both sides.

Especially for 6571 and 6572 with NAND memory, there is a high probability of the LCD being damaged or losing the image.

In this case, the firmware as such does not occur, boot is not sewn and other internal partitions are not installed either, the system partition is updated and perhaps something else. In the end, restore via twrp and that’s it, if something goes wrong.

First of all, flash using SP Flash Tool- TWRP or CWM (if available for your device), and make a backup of all blocks that will be available.

Marking blocks in memory; processor instruction sets; building projects; drivers for the device and its components; Android versions (4.2.2 / 4.4.2 / 4.4.4 / 5.0.2 / 5.1.1)

The desire to destroy the Good is welcome. Because Benefits are Big Lags, life is glitchy with them. And let's live together.

For devices with EMMC / EXT4 - MBR and EBR1 (EBR2), if you don’t know what it is, don’t check the box, and if you know, then flash them first, then everything else (without MBR and EBR).

MT 6735; 5.1" 720*1280.

Maybe you know how to enable IR port and Radio on it (I didn’t even have an FM receiver in the applications)?

Externally, all clones are similar, but there are many design options, using different platforms and other components of the device.

Flash TWRP into it and flash Supersu.zip.

(enable usb debugging: go to settings - about the device - and quickly tap on the build number 7-8 times. The "developer" menu will appear in the settings. Go in and enable usb debugging.)

That is, you can install the firmware from the original S6?

PS: Methods for creating screenshots of the required area, or program window from the PC desktop, are at your discretion.

The desire to destroy the Good is welcome. Because Benefits are Big Lags, life is glitchy with them. And let's live together.

Front-camera: gc2755mipiraw (Most likely from Samsung at 2MP)

MT 6582; 1.3GHz - QuadCore ARM Cortex-A7 | 32bit SingleChannel - 533MHz LPDDR2/LPDDR3.

* Comments and posts with questions about the "Galaxy S7" clone in this topic will be deleted. Firmware and other materials remained in the same place *

This option won’t work: “sorry / excuse me, I’m a teapot / coffee maker, I don’t know how / don’t understand anything.” In this case, you are on your way to the workshop.

The option is more complicated, but more accurate: Install RootExplorer, go to the root /system, open the “build.prop” file in reading mode and look at the line; ro.build.version.sdk=??

If your question does not concern the software part of the device, these requirements do not apply to you.

For questions about filling out the header, please contact QMS.

Antivirus is useless if malicious code is located in the system directory. In this case, Root access is required and the solutions are below:

I’ll help you in any way I can, I don’t even know what (in porting), but I would really like normal firmware. It would be nice with re-partitioning, otherwise the recovery is 6MB nonsense.

Chinese copy of Samsung Galaxy S6 SM-G920F (MTK6582) - Discussion - w3bsit3-dns.com

Install rootexploer and open the data folder in the root and select properties on the folder one by one. And browse. That's how I look through it.

And so - the device pleases. The Home-Work-Home battery lives, GPS reception is good, photos are suitable for Instagram and networks.

When you get ready, it’s better to check everything first. Make a scooter using mtdroid, or look at the block map.

The desire to destroy the Good is welcome. Because Benefits are Big Lags, life is glitchy with them. And let's live together.

Be emotionally restrained, write without excesses or digressions, only the essence and facts.

When exiting, a proposal will be displayed - delete the Recovery overwrite file (agree), followed by a proposal - flash SuperSU (agree) and reboot.

For devices with NAND / UBI - If the device does not boot into the system (hangs on Logo), only the System and Userdata partitions can be flashed. Otherwise - a brick, or a complete absence of an image.

In general, I only worked with Qcom devices, but there were problems with MTK, I started digging about this phone and found nothing, not even kernel sources.

I would also take MT6592, I really want it.

With twrp it’s easier, you need to install the Mobileuncle application after receiving root rights, give it a su and flash it using twrp.

Or, bend the tip of the blade and carefully walk it along the inner perimeter of the glass, periodically pulling it towards you.

In the future I’m thinking of making a 5.1.1 port with the normal Samsung shell.

There is not even a root, so far these phones are in question for sale, since I still want to take the mtk6735.




PS: To prevent the inscriptions from being hard to see on the pictures, write them down in separate text.

Download and install Viper FX, launch it, and it will install the necessary drivers. Reboot and configure.

The desire to destroy the Good is welcome. Because Benefits are Big Lags, life is glitchy with them. And let's live together.

MT 6572; GSM/ EDGE/ R8 HSPA+/ TD-SCDMA (2/3G) (NAND - GSM/ EDGE | 2G)

❗ If you managed to clean the firmware on any of the platforms, if possible, dump it using the "SP Flash Tool" or "MTK Droid Root & Tools" programs and post it in the topic. Your work will help many!

You need to install RootExplorer, open the /system folder with it and take screenshots of the contents in the "build.prop" file. (no root needed)

Both the touchscreen and the back of my device are cracked. I want to replace the backrest first and look at the touchscreen markings, and then order it.

If you don’t understand what we’re talking about, then it’s better not to do it.

MT 6735; 2Core - Mali-T720 (P)400Mhz / (M)500MHz.

The desire to destroy the Good is welcome. Because Benefits are Big Lags, life is glitchy with them. And let's live together.

this. Not install, but update.

Actually, I’m almost sure that the back one from the original will fit, just the lens will need to be re-glued.

The desire to destroy the Good is welcome. Because Benefits are Big Lags, life is glitchy with them. And let's live together.

How to flash a Chinese Samsung Galaxy?


The updated firmware is great way make important adjustments to the phone system, eliminating glitches, making it more technically advanced, and adding some new features to the phone. We offer you instructions on how to update the firmware of your Samsung Galaxy via a computer (using the example of the Samsung GT-I9300 Galaxy S III firmware).

How to flash Samsung Galaxy: instructions

Let us immediately emphasize that, despite its apparent simplicity, the procedure still presupposes the presence of basic knowledge in this area. Therefore, if you are not confident in your competence, it is better to turn to professionals.

You can obtain the utilities necessary for the procedure, for example, on a specialized forum. As an example, we will turn to the website 4pda.ru for help.

Preparatory work

  1. Go to the page dedicated to flashing the firmware for the phone model indicated in the very first paragraph of the article.
  2. Open the "Official Firmware" section and select the most latest version(or any other that interests you).
  3. Click on the link - it will take you to another page (for example, this one). There you can choose a mirror for downloading the file - Yandex drive, Google drive or Mail.ru Cloud. Follow the link and download the file.
  4. Now open the "Drivers" spoiler. First of all, you will need to download the Odin3 v3.07 SGSIII program (for example, from this link or from any other site you trust). It will help you flash a Chinese Samsung Galaxy.
  5. Next, you will need to download and install the Samsung Kies program on your computer (we don’t need the program itself for firmware, but we will need drivers for USB, which the utility automatically installs on the PC). If you already have the program installed, then you don’t need to do anything.
  6. For further work you will need to disable Samsung Kies. To do this, click on its icon on the desktop taskbar right click wave and click "Exit".

Firmware

  1. Let's go back to the firmware. To do this, open your downloads folder and find the archived file there. installation file Odin, unpack it. In the regular folder that appears, delete the ss.dll format file.
  2. Then find the archive folder with the installation files for Odin. Unzip it by opening a regular folder and run the installation file in it (has a colored label).
  3. Turn off your phone.
  4. Now press and hold the volume button (at the point that lowers the sound), simultaneously press and hold the button at the bottom of the “Home” screen and, without releasing them, press and hold the phone’s on/off button.
  5. A warning message will appear on the display. After releasing all the buttons, press the top of the volume button once - this will allow you to enter the firmware mode.
  6. Connect your Samsung to your computer using a USB cable.
  7. If the system on the phone is working correctly, if you have done everything correctly, and all the necessary drivers are working adequately, then a small window in the Odin program window will light up with a greenish tint.
  8. Click on the “PDA” button, open the folder with the firmware, click on the only file (remember, we deleted the second one from there) and click in the “Open” window. The name of your firmware should appear in the window opposite “PDA”.
  9. After that, in Odin, click on the “Start” button. The data download process will begin, the progress of which can be monitored by the download bar. It will last about 4-5 minutes, then the blue “Reset” window will light up.
  10. Disconnect the USB cable.
  11. Close Odin.
  12. Turn on the phone - a message about updating the OS will appear on the display. Wait for it to finish.
  13. When the phone starts, you can go to the settings and there in the “Firmware Version” section you can see the name of the update you installed.

Also read other articles related to this phone model.

Instructions for updating the SM-G920F smartphone to a new one official firmware, and getting Root superuser rights to Galaxy phone S6 SM-G920F.

Before starting the firmware Samsung phone SM-G920F, you need to download first necessary programs and files to your PC.

1. Download the firmware program - (this program is used in official Samsung services).
2. Drivers for connecting your smartphone with your PC - Drivers for Samsung Galaxy S6
3. Then download the firmware you like for Samsung smartphone Galaxy S6 SM-G920F for example one of these:

4. Unpack the Odin flasher program and firmware into any folder (it’s most convenient for me on the desktop).
Note: Sometimes Odin gives FAIL! due to the presence of Cyrillic (Russian letters) on the path to the firmware (For example, C:\Users\Name\, etc.).
5. Launch the program Odin as administrator (right click on the icon - run as administrator - Yes).
Note: Usually, when you simply open Odin, you are automatically asked for permission to run as administrator.

6. After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the field "BL"
The AP……….tar.md5 file is inserted into the field "AP"
The file CP……….tar.md5 is inserted into the field "CP"
The CSC file……..tar.md5 is inserted into the field "CSC"

7. We switch the phone to firmware mode (To do this, in the off state, press and hold the buttons Volume down + Home + Power and after the menu with a yellow triangle appears, press the button Volume up which actually confirms the desire to enter the firmware mode of the Samsung Galaxy S6 SM-G920F smartphone.

8. Connect the SGS 6 smartphone to the PC, the Odin program should recognize the phone (in the upper left corner the ID: Com inscription will light up in blue), after which you can safely press the button Start. The Samsung Galaxy S6 firmware process has started, the progress of the firmware can be monitored in the log window, flashing the smartphone lasts from 3 to 15 minutes, it all depends on the capacity of your PC. Once the firmware is completed, the phone will reboot on its own.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try others USB ports or change the USB cable.

For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful device that combines hundreds of various functions. Taking a photo, counting the number of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything that you can do. modern smartphones. Sometimes we simply forget that they do not last forever and are subject to gradual wear and tear.

Smartphones running operating system Android systems have long filled the whole world with their diversity. Their program code open and ready to edit or improve. While using such devices, there are times when the software component malfunctions and the smartphone stops working properly. To solve the problem, a simple reset to factory settings may not be enough - you need to flash the Samsung Galaxy S6 Edge SM-G925F.

Fortunately, manufacturers of mobile equipment and simply enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life, starting its daily work with renewed vigor. AndroGoo website prepared detailed instructions on how to flash Samsung Galaxy S6 Edge SM-G925F.

What do we need?

  1. Device charged at least 50% (if possible).
  2. Original USB cable.
  3. latest version.
  4. Latest firmware:

If a new OS version has been released for your smartphone or the one you need is not in the instructions, please let us know in the comments below the post.

Samsung Galaxy Core Prime SM-G360H firmware process

  • If Kies was installed on your computer, remove it.
  • Download and install for Samsung smartphones and tablets.
  • Download and install.
  • Reboot the computer.
  • Unpack Odin onto your desktop. In the same folder we extract the firmware files from the previously downloaded archive.
  • On your smartphone go to “ Settings«, « For developers"(if there is no such item, go to " About the phone" and click many times on " Build number"), turn on " USB Debugging" And “Unlock. predetermined production.".

  • We transfer the smartphone to Download Mode . To do this, turn it off completely, hold down the buttons at the same time Home+Power+Volume down.
  • After the screen appears with the message Warning, confirm the choice by pressing the button Volume up.

  • The phone has entered download mode.

  • Let's launch Odin on behalf of the administrator.
  • In this state, connect the device to the computer using a USB cable (exclusively USB 2.0) so that flash Samsung Galaxy S6 Edge SM-G925F. If in the ODIN window the field ID:COM turned blue, like in the screenshot below, everything is fine - you can continue. If not, reinstall the drivers and restart the computer.

Files that can be found in the archive with the firmware

The picture shows the names of files that may be in the archive with the firmware and indicates where to insert them in the Odin window.

If there is only one file and takes up a lot of space, insert it into the field PDA. This is the firmware.

  • In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto Reboot And F. Reset Time.

  • This is what the program window looks like ready for firmware:

  • Click on START and wait for the firmware process to finish. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch USB cable. The whole procedure will take a few minutes - the exact time depends on the power of the PC.

  • Once finished, the device will reboot itself. We disconnect it from the PC and start using the latest firmware.