How to connect the old center to a computer. A great way to improve the sound of your TV is to connect a stereo system. Video: connecting an electric guitar without a amp

The choice of how to play your favorite musical compositions is an individual matter for each person. In order to achieve high-quality sound, but at the same time save on purchasing a good acoustic multimedia system, it is worth learning how to connect a music center to a computer.

Multimedia centers appeared on sale in the late 90s of the last century, but today their popularity is rapidly fading. Connecting a laptop and a multimedia system allows the user to expand functionality technology, listen to music not only from external storage media (disc, flash card), but also from the Internet.

What is needed to connect?

Majority computer speakers and laptop speakers do not have the ability to reproduce high-quality and clear sound that will allow the user to enjoy listening to their favorite music, watching movies in HD quality or multimedia presentation.

To perform work on connecting acoustic equipment to a PC, you need a special adapter cord - a 2RCA mini jack cable, which is available in almost any store. computer equipment or radio equipment. Its cost is no more than 200-300 rubles.

A 3.5 mini-jack is installed at one end of the adapter cord, and two RCA (“tulips”) are installed at the opposite end. The principle of switching two devices is to connect the linear input of the multimedia system to linear output laptop or laptop sound card.

Attention! A self-soldered wire can be used to connect audio equipment and PC. A regular 3.5 jack headphone cord will do for this.

Connection and setup steps

After purchasing a special plug, you can begin connecting multimedia equipment and the system unit. Before connecting the stereo to the computer, you need to check the integrity of the cable; to do this, you need to unpack it and carefully straighten it.

Step-by-step instruction:

• one end of the adapter wire is inserted into the corresponding interface of the laptop block located on the back side (the socket is usually green);
• the other two ends of the cord (tulips red and white) are connected to interfaces on a multimedia device;
• The linear input for some equipment models will need to be activated by turning on the AUX or LINE-IN mode.

Note! If on multimedia equipment ( system unit or laptop) there are no RCA connectors, then to connect two devices you will need a cord with two 3.5 mm Jack connectors. When making a connection, it is recommended to turn off the power to both devices.

After connecting the equipment, it is worth setting up and checking for sound. Before turning on the music, you must completely turn down the volume and gradually increase it from the zero equalizer level.

Today, improved gold-plated adapter cords for high-quality audio signal transmission without extraneous interference are widely available on sale. However, experienced specialists, in order to save money, do not recommend purchasing them in stores, since their use is only advisable in conjunction with more serious equipment. In domestic conditions, the difference between a gold-plated wire and a regular cable will be practically unnoticeable.

Before purchasing a wire, it is worth considering the brand and model of the switched devices, since almost all equipment has connectors and plugs of different diameters. It is also not recommended to connect acoustic speakers directly to the power supply as this may damage the wiring and software.

Many users are wondering how to connect a music center to a computer. This is due to the fact that the acoustic system itself is practically of no value today. After all, to listen to songs on the center you need to use disk or flash drive. A computer connected to the Internet allows you to listen to any music and watch movies. Meanwhile, the sound in a music center is often better compared to the speakers of a PC or laptop. Methods for connecting a music center to a computer will be discussed below.

The first way to connect your player to a PC is to use an RCA-3.5 cable. In this case, it is recommended to select the option with two tulips– red and white. On sale you can find a version with three (+yellow), but if you use such a cord, the sound quality may be worse.

When choosing a cable, experts advise using those with gold-plated plugs.

It is better to use a cable with gold-plated plugs

When you have the required cord on hand, you need to do the following.

1. The center is disconnected from power for safety reasons.
2. The 3.5 plug should be inserted into the audio jack of the PC or laptop.
3. In the music player you should find AUX and connect tulips to it in the corresponding colors of the connectors.
4. All that remains is to plug the device back into the socket and play music on the PC to check the result.

Wireless connection

Wires are convenient for connecting stationary devices, but a laptop is still a mobile device, so it is more convenient to output sound from it via Bluetooth. This method works even in a situation where the center is not initially equipped with a built-in module. This can be fixed purchase Bluetooth adapter , which connects through the 3.5 jack or tulips on the music player. After this, all that remains is to add a Bluetooth device to the laptop - in this case, a receiver connected to the player.

The adapter will help you output sound to any Bluetooth device

If there is no sound

The methods above are very simple, but it may happen that there is no sound after synchronization. In this situation it is worth considering possible reasons failure.

Making a tulip with your own hands

Adapters for connecting one equipment to another are quite inexpensive. But there are situations when you don't want to go to the store or you just like to tinker with electronics. In this case, you can make a cable to connect the computer and the music center yourself. To do this, perform the following manipulations:

1. Take a regular headphone wire with a standard plug and remove the insulation from it.
2. After this you need to twist copper wires in a tight tourniquet.
3. Now we wind one end of the wire to the audio input. Of course, it is best to solder the parts.
4. Next, the contacts at the center and the other end of the wire are connected.
5. After this, we connect the metal and plastic parts using electrical tape.
6. This cord can be connected not only to a computer, but also to a phone or tablet.

Of course, such a system is imperfect and its implementation will require a lot of material that is difficult to find in the home of an ordinary person. Therefore, it is easier to buy a cable.

When using a headphone cord, you should arm yourself with a lighter and singe the ends of the wire. This way you will remove the insulation and get rid of unnecessary hairs that will interfere with your work.

Conclusion

Using a music center as speakers for a computer is very reasonable and practical. Firstly, the device’s speakers convey sound much better than most computer speakers, and secondly, in this case your center will not gather dust on a shelf. After all, with the advent of the Internet, listening to music on discs has become no longer practical.

A music center is an excellent means of playing audio, but its intended use is not particularly relevant today. This situation can be corrected by connecting the existing speaker system to the computer.

Connecting a speaker system to a computer is not much different from a similar process with a home theater or subwoofer. In addition, all the steps described throughout the article will allow you to connect the music center not only to a PC, but also to other devices, for example, a phone or laptop.

Step 1: Preparation

In order to connect your computer and music center, you will need a cable “3.5 mm jack – RCA x2”, which can be purchased at almost any electronics store. Also, the necessary wire is often included with the speaker system.

Note: If you use a cable with three or more plugs, the sound will be less than normal.

Sometimes a standard cable may have three or more RCA plugs instead of two. In this case, it is better to get the cord mentioned above or remake the existing one.

If you install the required cable yourself, you can use special plugs, the connection of which does not require soldering the contacts. The same can be done with a soldering iron, but then do not forget to insulate and check the contacts for short circuits.

Step 2: Connection

When necessary components will be ready, you can proceed directly to connecting the computer to the music center. Please note that some actions may differ from those described by us during the instructions, since each device is unique in its own way.

When connecting the speaker system and computer, you must adhere to safety rules. Although doing the wrong thing does not pose a physical threat, it can cause injury. sound card or music center.

Step 3: Check

After completing the connection of the music center, you can check the functionality of the connection by simply turning on the music on the computer. For these purposes, use one of music players or special websites on the Internet.

There are many models of televisions and music centers on the market from different companies: LG, Samsung, Sony, Philips and others. This technique allows you to enjoy watching your favorite movies and listening to tunes. Sometimes there is a need to improve sound quality. In such cases, a question arises related to how you can connect the music center to the TV. This article will discuss options for connecting these devices.

Description of the connection process

Before connecting, you need to read the instructions for both the TV and the stereo. To connect equipment you will need a suitable cable. All pairing steps are very simple and will not be difficult to complete.

Important! The first thing you need to do is carefully study the technique. In this case, you need to find connectors of the same color and shape. It is through these ports that the connection will occur.

As a rule, a backup cable is not included in the equipment. Therefore, you will have to go to a specialized store and purchase the necessary cord. If you have any doubts about which wire to choose, you need to ask a consultant at the point of sale for help. He should first explain the task at hand.

Quite often the connection occurs using a cable called "tulip" ( RCA-RCA). His photo is presented below.

To connect equipment through tulips, you must first make sure that all colors match(connectors and plugs are identical). It is also necessary that the equipment is disconnected from the power supply.

The final stage is connecting the device to the network. Acoustic system wherein switches to AUX mode. The sound should immediately come from her.

Advice! If extraneous noise occurs, you should turn everything off and choose a different cable.

Connection via receiver

Modern TVs do not have some connectors, but it is possible to connect through a receiver. This is a more difficult and less commonly used connection method. It will be appropriate when, in addition to the music center, you also need to output sound via auxiliary equipment or connect a subwoofer. In this case, the center itself is connected to the receiver (or amplifier), and the latter is connected to the TV.

Modern TVs are coming with built-in Smart TV, which significantly expands the range of functions. Auxiliary equipment allows you to reproduce sound in full.

Connecting an LG and Samsung TV to a music center

LG television equipment is slightly different from analogues from other manufacturers. Therefore, when connecting center speakers, you need to pay attention to a number of points.

Connecting a Samsung TV to a music center allows you to output multi-channel, high-quality sound to the speakers of the audio system. This is done via an optical cable (if possible) or using TRS-RCA or RCA-RCA wires. The entire connection process is similar to that described above.

Selecting a cable for connecting equipment

It is very important to get it right select cable and connect the connectors on the TV and amplifier. If they are different, then you need to purchase a special adapter. In this case, you need to find out exactly which cord to use in this or that version.

Important! The presence of different inputs for connection requires the use of a suitable cable. To obtain high-quality sound, it is recommended to use HDMI whenever possible.

Every home has video and audio equipment. With simple manipulations you can significantly improve the quality of the reproduced sound. To do this, you need to connect the television equipment with other equipment, for example, with speakers, karaoke equipment, or an audio system using suitable wires. This will allow you to sing with friends and watch your favorite videos from good sound, spend happy holidays.

The best music centers according to customers

Music center LG OK65 on Yandex Market

Music center LG OK99 on Yandex Market

Music center Sony MHC-V21D on Yandex Market

Music center LG RK3 on Yandex Market

Music center Hyundai H-MC120 on Yandex Market

Center to the computer. After all, using this device to listen to music is very practical. You have access to a music library located on disks, downloaded from certain Internet sites, as well as radio broadcasts. After all, if you just use headphones or some external ones, you won’t be able to feel the fullness and richness of a high-quality recording. Therefore, true music lovers always try to connect a music center to a computer.

In order to do this, you will need a tulip cord (connects the speakers from the music center to the computer, and also connects the music center to the desktop). In shops and markets it is simply called “tulip”. You can purchase it at any specialized store (computer, household appliances, radio and power instruments, musical instruments, etc.), as well as in the conventional and radio markets.

In order to do the right purchase, you must know the model of your center, since the connectors of this cord will be selected specifically for the dimensions of your musical equipment.

If you are interested in how to connect a music center to a computer, then you should not follow the advice of some sellers and connect the speakers directly to the PC. Insert one end of your “tulip” into the input connector, which is located in the music center (it is original for each manufacturer, and its location will depend on the device of a particular model).

The second end of this cord will have a standard connector, the so-called “jack”. So that you understand what we are talking about, pay attention to the speaker connector, etc. In order to understand how to connect a stereo system to a computer, you must find a special output jack for speakers or headphones. This is exactly where you need to insert this tulip jack. When you do this, the integrated acoustic elements will automatically turn off.

Your next step after you have connected the music center to your computer is to select a certain option in the center menu that will allow you to play the audio stream from the connected devices. This is basically the same button that turns on the sound of the connected TV. That's it, now you know how to connect a music center to a computer. You can enjoy your favorite songs!

Finally, I would like to draw your attention to the fact that some sellers will recommend that you purchase an improved “tulip” with gold plating. They will say that it will allow you to play music without any unnecessary noise. These cords will be significantly more expensive than regular ones. And although this gold plating will really have a good effect on the sound quality, you are unlikely to be able to feel this difference at home. After all, this is only possible with the help of special professional equipment. Therefore, if you are not a DJ or a professional sound engineer, this is of no use to you.