Where can I install a map on my navigator? How to upload maps to the navigator? Simple solutions. How to download and update maps in your Garmin navigator

Almost all Android and iOS smartphones have built-in GPS sensors to track the device and geoposition anywhere in the world. Dozens of applications are being developed specifically for this, which will display your location on the map at any moment, notify you about traffic jams, and show the nearest restaurants, cafes, schools and other infrastructure. different types and level.
Today there are several main programs that are used for navigation: Google Maps, 2GIS, Navitel, Yandex Maps.

Main advantages of Navitel

Free trial period of 30 days
Supports almost all gestures on a touchscreen device
Works with all versions of Android, iOS
Offline mode support (see)
Loading and deleting maps of any city, country, region
Ability to transfer maps and applications to SD card

This is just a small list of the capabilities of the Navitel program. And if previously it was installed only in specialized devices - GPS navigators, now it is present in almost every smartphone, and is also available for downloading from services Google Play and Apple Store. As practice shows, many users cannot independently install the program on the device and make all the necessary settings. In this regard, the question arises - how to install Navitel on Android?

We will describe several installation methods:

Installation via apk
Installation via exe
Installation from Google Play service

How to install Navitel using apk file

You can download the file either from the official Navital website or from any other portal that provides such an opportunity. However, it is worth considering that some sites distribute malware along with applications. Therefore, if you are not sure of the reliability of a particular portal, then it is better to go to the official website and download the distribution of the latest available version from there.

Go to the official Navitel website (www.navitel.ru)
At the top, click the "Download" tab
Now on the left side click “Distributions”
The page will appear full list files for Android version. It will also be possible to go to the official Google service Play or Apple Store directly from the site using the necessary links. Attention! This page first presents versions for Android smartphones, Windows Phone, Symbian, and below are files for car navigators.
Once the file is downloaded, transfer it to your phone. It is best to copy directly to a flash card, because all city maps (each from 10 MB to 1.8 GB) will also be downloaded there.
On your Android smartphone, run file manager and open the apk app. The installation wizard will appear, which will provide a complete list of trusted actions on the part of Navitel. Click “Install” and wait for the application to be installed on your phone. Once the installation is complete, you can download the maps and use free version within 30 days.

Don't forget to register the program and purchase a full license!

Installing Navitel via exe file

The program can also be installed using the standard Windows installer. To do this you will need to connect your mobile phone Android to computer via USB port.

Go to the official Navitel website.
Click the “Download” tab - “Distributions”.
Select the exe version from the list.
Once the file is downloaded to your computer, run it. Follow the system prompts. Within a few minutes, the GPS navigator will be installed on your smartphone.

For 30 days, the application will work in free mode, but in the future you will need to register the program and purchase a full license.

How to install a navigator via Google Play

If you have access to the Internet from your phone and an account on Google Play, then you can download and install the Navitel navigator directly from there, without wasting extra time connecting your phone to your computer or searching for files on the official website. So, how to install Navitel on Android?

You need to do the following:

Open your phone's menu and select Google Play.
Log in with your account and enter the name of the program in the search bar.
Select the Navitel application and click the "Install" button.
A notification will appear on the screen about the capabilities of the application, as well as about trusted actions that will be available to Navitel after installation.
Once the download is complete, go to the program and register it by purchasing a full license. Remember that you can use the application for free for 30 days!

How to install Navitel maps on Android

By default, the application is installed “naked”, that is, it does not contain any maps. The user himself chooses which ones he needs and downloads them separately from the application or from the official website.

To download maps from the official website, go to www.navitel.ru
Select the “Download” tab at the top of the site, go to “Maps”.
A complete list of countries for which maps are available will be presented here. Select the required cities and download the files to your computer. Then, after the download is complete, connect the device via a USB cable and transfer the files to the sdcart/Navitel/Content/Maps folder.

If you have access to the Internet from a smartphone (preferably WiFi connection), then you can download all files directly from the application.

Launch the program on your phone.
Go to the “My Navitel” tab - “Download maps”.
Select the desired list of maps and wait until the download completes.

Currently, without such a device as a navigator, it’s just like being without hands. A lot has already been said about the benefits of this guide. Among the various models, domestic Navitel navigators are widely used. Naturally, over time, any device needs to be updated. This also applies to navigators, or more precisely, to the maps that are installed in them.

Installation

Installing Navitel cards is not difficult. It should be noted that you can install or update them either manually or automatic mode. If you install Navitel cards yourself, you will definitely need a laptop or PC and Internet access.

First you need to go to the manufacturer's website. You can use any other tracker, since users post many links and files to this resource. It is important to remember that Navitel maps of the slightly outdated third version will not fit the updated fifth version of the navigator. This is because newer versions are much heavier (due to more information contained in them).

So, next you need to choose necessary cards: at least throughout Russia, at least in individual regions. The new options are suitable for all operating systems on which the Navitel navigator operates: Android, Symbian, Windows Mobile. The folder with maps is located the same on all systems.

If they were downloaded in an archive, then the next step is to unpack them to any location. To do this, you need to connect the device to a computer or laptop. Through Explorer you need to find a special folder, it is called NavitelContent/Maps. All maps that were downloaded earlier should be copied to this directory. If desired, they can be sorted into separate folders.

Settings

After necessary files will be loaded, you should run the program. Ideally, she will independently discover the maps and compile an atlas. If this does not happen, you should go to “Menu” - “Settings” - “Maps” - “Open atlas”. Here you need to select the options that will be needed and click the “Create atlas” button.

Results

Installation of Navitel maps must be performed not only on navigators, but also on other devices with GPS navigation function. After all, not only a driver, but also a simple pedestrian can get lost in an unfamiliar city. Therefore, it is worth making sure that all possible versions are also installed on your smartphone. After all, installing a Navitel card will not take much time; the process itself is quite simple. And later updates can be performed automatically, which is even easier.

The program for navigation from the Navitel satellite is supported by any device with one of the operating systems: Windows Mobile, Windows Phone, iOS, Android, BlackBerry. If your navigator or any other communicator has a card recognition sensor that operates on the basis of one of the listed shells, then you can download this utility. Here we will look at how to install Navitel on a navigator.

Where to find the program

You can download the application from Google Play. To do this, just enter the name of the service in the browser search engine.

If installation is intended to be installed on a navigator in a car, then the saved file can first be placed on a flash drive, and then manually downloaded to the device itself by inserting a USB drive into it. In order to install the program, the navigator can be connected directly to the computer. You just need to create a folder for maps in the root partition on the disk that opens.

In addition to Google tools, any version of the program can be downloaded immediately from the official website. They will provide a trial version.

Installation process

When the folder is created, you need to find the atlas in the navigator and open it. Create another folder there. In the pop-up window, specify the path to the new map by simply clicking “Create atlas”.

Installing the Navitel program on your navigator will be quite simple if it has a license. You just need to press a couple of buttons and the step-by-step installation will begin, which will go very quickly.

You can also install the program on your phone. If you download an application from Google, everything will happen as quickly as possible during the download.

Benefits of the official version

When the program is installed, it needs to be registered on the official website. This application has a shareware status. After successful registration on the site, paid, more advanced versions will become available, which will always be up-to-date. The official paid program supports all maps that the user has downloaded. In addition, it is constantly updated. Its cost is low, only about 600 rubles.

To install the program from the official website, you need to specify the device type and operating system in the download parameters. Once the application is downloaded, you just need to launch it and it will start working on its own.

Depending on the type of device, the installation process may vary. More detailed instructions can be found on the official website.

Free installation instructions

You can install Navitel on your navigator for free using a memory card that the device supports. To do this you need:

Download the archive with the version of the program supported by the operating system.
Format the card, create a “Navitel” folder in it and unpack the archive there.
After that, insert the USB flash drive into the navigator, follow the GPS link and click on NAVI.

The system will ask you to specify the program to launch. There you will need to select the Navitel download file. When the program is installed, you need to load maps into the Maps folder, which can also be found on the Internet. To do this, the memory device must be removed and connected to the computer.

When the flash drive is reinserted, everything should work. In the same way, you can install Navitel on the Explay navigator.

How to update

We looked at how to install Navitel on a navigator. The program and maps need to be updated regularly. To do this, in your “Personal Account” in the “My Devices” section there is a link with available updates. There is a whole list of navigator models, among which you need to choose yours, after which you can download latest version programs. It weighs only about 30 megabytes.

Can also be customized automatic update. To do this, you need to download the additional Navigation Updater utility to your navigator. It only works on computers with operating system Windows. Mac owners can only use manual updates. To do this you just need to erase old files and write down new ones. The maps will either have to be deleted and downloaded again, or temporarily moved to another location.

The main thing is to allocate enough memory. Before installing Navitel on your navigator, you must carefully study the instructions. Quite often the program displays an error when there is not enough space on the card. The way out of the situation is to transfer all the information to a larger flash drive.

Here it is important not just to copy the files, but to do a number of additional actions, otherwise the program will not recognize any cards.

What should be done:

Deactivate the key in your personal account.
Go through all the above steps again.

Please note that you can deactivate the key only once, that is, you need to be careful when choosing a flash drive.

So we looked at how to install Navitel on your navigator. The process is quite simple, but if you need constant up-to-date information, you may need to certain time and patience for further convenience.

As a rule, most navigators come with pre-installed maps and a navigation program that plots a route using these maps. The navigation program works with certain maps created specifically for it. For example, there is a navigation program “Navitel-navigator”, which works with Navitel maps. It will not work with Garmin maps and vice versa.

The basic set of maps in the navigator does not always contain maps of all the necessary regions. Sometimes there is a need for additional cards. How to install a map in a navigator? There are two ways: purchase the necessary license cards, download free cards from the Internet.

Installing official maps on the navigator

Installing official licensed maps is not a difficult process, just like updating maps in your navigator, and each developer has detailed instructions on this topic on their website:

Installing unofficial maps

The difficulty in using unofficial maps is the lack of any technical support and updates. Where do they come from? They are made by navigator users like you, based on existing geographic maps of various regions.

To add such a map to your navigator, you also need the map format to be suitable for your navigation program, and also that the navigation program supports adding its own maps. Where can I get cards? Maps created using the OpenStreetMap|41 resource are very popular.

Important Note

When installing unofficial maps on your navigator, you do so at your own peril and risk. Before installation, it is recommended to backup the data from your navigator to your computer. To be completely confident in the functionality and security of the software, purchase official cards.

How to install or update maps in the Navitel navigator

Step-by-step instructions on how to install a Navitel GPS map on your navigator. To get started, download Navitel maps based on OpenStreetMap:

Connect your navigator to your computer. If the Navitel program is located on a separate flash card, then remove it from the navigator and open it on the computer. In the future, we will assume that we are working with a flash card.

In the root of the flash card, create a separate folder for third party cards eg UserMaps. Do not touch other folders or save anything in them to avoid possible conflicts between official and third-party cards.

In the UserMaps folder, create a folder for the region map that you want to add to the atlas, for example Region1.

Copy the new map files to the Region1 folder

Insert the flash card into the navigator

In the Navitel Navigator program, select the “Open Atlas” menu item and click on the folder icon at the bottom of the window to create a new atlas.

In the window that appears, find the Region1 folder where new maps are stored, click on it and select the “Create atlas” command

We are waiting for indexing to finish and the atlas to be created. Click the button with a check mark.

Now you can use new card by selecting the corresponding atlas in the list of atlases.

How to download maps to your Garmin navigator

Free Garmin maps based on OpenStreetMap can be installed using MapSource. The following describes how to load maps into the navigator using it:

Download the MapSource program to your computer from the official Garmin.com website from the Support->Software section and then Mapping Programs.

Unpack the archive into a separate folder and run the MSMAIN.msi file from it and only then Setup.exe. Wait for the program installation to complete. Since you don't have any Garmin maps on your computer yet, there's no point in launching MapSource yet.

Download the necessary Garmin maps

Unpack archives with maps into separate folders

Run the INSTALL file for each card so that the computer registry receives necessary information about cards.

Launch MapSource. Now in the program you can detect maps installed on your computer through the menu Tools->Manage cartographic products.

A list of available cards (1) should appear in the upper left corner of the program. Using it or through the menu View->Switch to product, select one of the cards, it will appear in the field (3).

Using the button (4), click on the map (3) and it will appear in the window (2). Do this with all the necessary cards.

Press button (5) to send cards to the device. The specified maps will be formatted into a file with an IMG extension and transferred to the Garmin device, which must be previously connected.

Since when loading maps it will be generated new file gmapsupp.img, then the original file will be overwritten, so if your device had pre-installed maps in the gmapsupp.img file, then before uploading the maps to the navigator, you should rename it to one of the allowed names, for example, gmapprom.img.

Installing Autosputnik maps

You can add amateur maps for Avtosputnik based on OpenStreetMap to the program, just like official ones, skipping only the registration step. Just copy them to the Maps folder after unpacking them.

How to upload other maps to the navigator

It happens that after a purchase the client decides that the navigation program or maps do not meet his requirements and decides to change them. We have already said that each navigation program works only with maps designed specifically for it. Is it possible to completely replace the navigation software in a car navigator? The obvious answer is “yes,” but there are exceptions.

Garmin position

In particular, Garmin navigators that come pre-installed with Garmin software do not support the installation of any third-party software. Also, the Garmin navigation program is not distributed separately from the device itself for installation on navigators of other companies. The exception is the navigation software package for PC. Transferring software and maps from one device to another is impossible, since the license key is strictly tied to serial number devices.

Position Navitel

A similar policy is used by CST CJSC, the developer of Navitel software. The car version of the program is only available as part of the navigator upon purchase and cannot be purchased separately. Therefore, if you have a navigator with Autosputnik or any other product, then if you want to switch to Navitel you will have to buy another navigator with Navitel included. A strict license also prevents the transfer of software and maps from one device to another when the device is replaced. To use Navitel, but not buy a new navigator, you can purchase a version for PDAs and mobile phones with a less strict license.

Position Autosputnik

Autosputnik turned out to be the most democratic in the matter of replacing and transferring cards. Having purchased a license for the Autosputnik 5 program once, you can use it even if you change your device to another. You only need to go through the re-registration procedure on the manufacturer’s website. Moreover, the Autosputnik program always comes as a bonus to all purchased cards. The only limitation may be the navigator model; devices supported by Autosputnik are listed on the website. The price of the product is also attractive, around 1000 rubles, which is two or even three times less than Navitel. With this approach, it’s not a pity to buy Autosputnik and, if something happens, it’s painless to abandon it.

Multiple programs on one device

Some navigator manufacturers have met their customers halfway and given them the opportunity to use several navigation systems on the navigator instead of one using the so-called alternative shell.

The alternative shell is copied to internal memory or a flash card inserted into the navigator, and, as it were, “pretends” to be a pre-installed navigation program, launching instead of it. In a separate settings file for the alternative shell, the paths to the files of existing navigation programs are specified, which can be called through the menu of the shell itself.

The X-device company offers one of these shells for its navigators; you can learn about setting up and installing this component on their forum. Lexand has also provided the ability to use several navigation programs; the shell can be found here.

Navigators provide convenience to many motorists, simplifying the task of finding the optimal route and thereby saving time. However, maps may be out of date or not accurate enough. In this case, there is a need to replace them with more modern ones.

Where to get cards?

The simplest solution in this case would be to purchase licensed cards or install them from the official website. But you can also go your own way by downloading from third-party resources.

Before uploading maps to your navigator, you need to weigh all sides of the issue. After all, after installing a card with a missing license, problems may arise with providing a guarantee from the service center.

Using any of the selected methods, you should know that the entire installation comes down to simply copying the file. And if the navigator does not automatically detect the files, you need to find the path to them yourself.

Additional tools to solve the problem

Garmin navigator users can update or install maps using the MapSource program included on the disk. But for working with Linux system the use of the QLandkarteGT program is provided, but the result may vary.

Let's look at the sequence of how to upload maps to a Garmin navigator.

First, you will need to download the MapSource program, unpack and run the MSMAIN.msi file. Once the download is complete, you should run Setup.exe to complete the installation.

Having work program, let's move on to the question of how to download maps. In the navigator, for starters? you need to select maps directly of the desired area and unpack the archive. Among the unpacked files we find install.but and run it, however, before starting the process you need to turn off Garmin Maps Source.

Direct work with Garmin Maps Source means connecting the device to a computer with via USB. Using the program, you need to specify the path to the required map, mark the file with the “Select Map” tool and click on upload to the navigator.

It should be noted that previous version The map of the installed region will be automatically deleted.

Updating in Difficult Situations

Most Prestigio navigators even when purchased have very old version navigation system. Before uploading maps to your navigator, it is recommended to first update the system by installing software from the site and using it to update the device.

When updating, the program will offer a service such as uploading maps to the navigator. Prestigio works mostly with the Navitel program, which has a very strict policy regarding third-party cards.

When loading maps into Prestigio, there are a few details you should know. If your navigator does not have a flash drive, the installation location should be the Maps folder in the device memory. If you have a flash drive, the path will change to the memory card in the Maps section. If there are no such partitions, you should restart the device, and the navigator itself will create the necessary directories.

If the device does not automatically detect the card, you need to upload it to any folder. After downloading, using the “atlas” navigator function, specify the path to the folder. The device will independently create an atlas from all the files found in the folder. It is worth noting that the navigator indexes all maps, so it is better to divide the folders by region.

The solution might be interesting

The most in an original way how to upload maps to the navigator, you can read them self-creation. In a situation where there is no information about the region of interest, the question arises of how to upload maps to the navigator. Explay or a device from another brand supports the jpeg image format, which means you can scan a paper card.

First, we need a high-quality scan of the selected map with a north orientation. Next, you need to select key points on the map, preferably several. Find out the width and longitude of each selected point and enter the data into the created text file. The file must be saved in HTM format.

After creating a folder on your device, copy Text Document with coordinates and a scanned map of the area. By indicating the location of the map to the navigator, make sure the functionality and quality of the resulting image.

Good to know

To download maps to the navigator via USB, the navigator must be turned off, and only after disconnecting the cable can it be turned on.
Older versions of maps almost always resolve themselves when newer ones are loaded.
Always create backups before installing unverified cards.
When buying a navigator, it is not always possible to get the necessary map in addition to it.
By installing cards from a third-party source, there is a risk of voiding the warranty.
You can find a suitable map on the official websites.