Automatic settings MMS Beeline Caucasus. Automatic MMS setup on Beeline. Beeline MMS connection

MMS is a special type of message that can transmit any media product - photographs, music or video. It is still very popular, especially if the phone does not have an Internet connection. In this article we will tell you how to connect MMS on Beeline and what settings need to be made.

By default, each phone has a basic Internet package and the ability to send MMS. This can be checked at home page subscriber’s personal account or by calling Beeline customer support at 8-800-700-0611.
If you have previously disabled this option, you can connect MMS on Beeline using the command *110*181#. Connection cost and subscription fee are 0 rubles.

The cost of sending 1 MMS message for the "Monster of Communication+" tariff is 1.5 rubles, "First Children" - 3.95 rubles, and for all other tariffs - 6.6 rubles. The minimum message size must be 1 MB.

In order to set up MMS on Beeline automatically, you need to go to the company’s official website to the mobile Internet support page in the “Phone setup” item.

First, you will be asked to select the make and model of your device. Next, select the service to configure “ Mobile Internet", if the basic Internet package is disabled or immediately to the MMS item.

After you enter your phone number in the form provided, MMS settings will be sent to your number via SMS message, which will be installed automatically.

When setting up MMS on Beeline manually, you need to do a number of operations:

1. In the Settings menu of your phone, find the Connection Profile section and make sure that it exists and is called Beeline MMS.

2. If it is, go to the message settings item in the Messages menu, then MMS settings/MMS profile settings and make sure that the Beeline MMS profile is selected.

3. If it is not there, in your phone’s Settings menu, find the Connection Profile section, create a new profile in it called Beeline MMS and enter the following parameters:

— profile name — Beeline MMS;
— message server – http/mms/;
— GPRS data channel;
— access point name mms.beeline.ru;
-IP address 192.168.094.023;
— port number 8080 (or 9201 for WAP 1.x phones);
— username beeline;
password beeline.

4. Send a trial MMS message to check if the settings are correct.

MMS Beeline - how to connect and configure - 4.1 out of 5 based on 46 votes

This type messaging is no longer used as often as before, because at one time it was an advanced technology that made it possible to send not just a text message, but messages with multimedia. Now this function not used that often, but still used by a fairly large number of people. This material will discuss how to use this service on your phone.

If you have never used this option on your phone, then there is nothing difficult about it. It is very similar to the Beeline SMS option, only in the first case the user can write only text, and when using MMS you have the opportunity to add images, photographs and short audio recordings to this text. All this will be available from your mobile phone, as long as you have an Internet connection, so keep in mind that this service uses Internet traffic to send these types of messages.

How to connect MMS on your phone

If you need to send messages from your mobile phone, then you first need to pay attention to whether your phone supports this service. You can check this in the instructions for your phone or find a description of it on the manufacturer’s official website.

Text-decoration:="" underline="">moskva.beeline.ru/customers/help/mobile/mobilnyy-internet/nastroika-telefona/ or dial the phone number 0604 32 . After this, it is enough to restart your phone by simply turning it off and on again.

How to send MMS from your phone

After connecting to the service and receiving the settings, you can proceed to sending messages. To do this, you need to follow these steps on your phone or smartphone:

  1. Go to phone menu
  2. Select the item " Messages»
  3. Choose " New MMS"maybe create an MMS
  4. Write text and add attachments
  5. Specify the recipient's number
  6. send a message

As for the size of the message, it should not exceed 500 KB, and if there is text, it cannot exceed 1000 characters. Send this type of message to the numbers of all Russian operators, also except mobile operators sending can be made to email. If necessary, one MMS can be sent to several subscribers at once; to do this, their numbers should be listed separated by commas.

I can't send MMS

If for some reason you are unable to send a multimedia message from your phone, then you should follow a number of steps to find out the cause of the problem. So, for this you need:

  1. Check the connection to the network and the presence of a GPRS signal (the network and GPRS signal indicator is displayed at the top of the mobile phone display)
  2. Check whether the number of the subscriber to whom the delivery is being sent is indicated correctly.
  3. It is also worth checking that the specified settings are correct for your phone model
  4. If all else fails, then you should contact the nearest communication center moskva.beeline.ru/customers/beeline-on-map/

The message may not be delivered because the user’s phone was turned off or the SIM card was faulty.

How to view a received message on the website

If you receive a message like mms.beeline.ru/, then you received it because the service is not configured on your phone, or for some other reason you were unable to receive it on your phone. In this case, you will be sent a link where you can view this message on the Internet.

It is quite easy for the user to do this; you need to enter this data in the browser in the address bar of the site and you will be able to view your MMS. It is worth noting that this kind of message will not be stored for long, there is certain time storage, that is, this link will only work for three days. After which the information will be automatically deleted from the company’s server.

MMS is the ability to transmit messages containing multimedia: audio recordings, photos and video files, the maximum size of which does not exceed 500 KB, and the number text characters– 1000 characters. By setting up MMS, you can not only send, but also receive messages from your friends and family.

You can send multimedia to any other number or to email. Data transfer occurs on site Russian Federation, and beyond.

The service is paid. The cost depends on the tariffs in force at a particular time. On average, sending one MMS message will cost you 7.95 rubles.

from Beeline?

In order to obtain information about whether the service is activated, we recommend contacting Beeline technical support by calling 8-800-700-0-611 . You can also go to your Personal Account on the official website, where the list of current options is displayed.

If similar service data transfer is not detected, activate it in one of the following ways:

  • dial the command *110*181# on your gadget, which activates a package of 3 services, in particular MMS;
  • go to the operator’s Personal Account cellular communications and select the “Available” tab from the “Services” menu (this connection can be made both on a desktop computer and through the Beeline application on your smartphone);
  • visit the Beeline network office and ask to connect to one of the employees (help is provided free of charge).

How to automatically configure MMS from Beeline?

As soon as the MMS service is connected, you will have to activate it to read and send multimedia messages. Follow the instructions below:

  1. Follow the link “Configure MMS” to obtain settings for specific model phone.
  2. In the drop-down window, select the gadget model or enter the name in the line provided for this.
  3. Click on the “MMS” button and activate the “Yes! Go to MMS settings."
  4. If possible, configure in automatic mode Enter your phone number in the field and confirm sending the data. When configuration is only available in manual mode, you must strictly follow the instructions that came with your phone along with the warranty. Be careful, because for different models, manual activation of MMS can be performed with differences.
  5. After you automatically receive the MMC configuration files, you need to apply them and reboot mobile device.

There is another way to use the automatic service settings - call 060-432. After rebooting the gadget, you can safely receive or send multimedia files to your friends and family.

Setting up MMS manually

If, due to certain circumstances, you are unable to access the website to retrieve the settings to activate the service, use the settings menu on your phone. To do this, go to Settings and create an MMS profile that requires the following data:

After entering the parameters, save the profile and restart the phone. Now you will be able to use MMS messages.

Happy connection everyone!

The Beeline MMS mobile service opens up wide opportunities for transmitting instant multimedia messages between subscribers. Such messages may contain audio recordings, videos, photos, texts. The allowed size of files to be sent is 500 kilobytes. The character limit is 1000 characters. You can send MMS to phone number or by email. The cost of one such message varies from the established tariff plan. This amount is approximately equal to 8 rubles.

The transmission of MMS messages when using the Internet is blocked, which means that in order to communicate with other subscribers via MMS you will need a connection and settings on your phone.

To clarify information about connecting to this service, you need to call the support number 8-800-700-0611 or visit your Personal Account, where you can see the full list of services. In situations where the MMS option is not connected, you can use one of the activation options listed below.

  1. Type the command on your device *110*181# . After this, a package of three services will be activated, the list of which also includes the possibility of using MMS.
  1. You can also activate this service using your Personal Account. Here you need to open the “Services” tab, and then “Available”, then select the MMS connection option.
  1. By visiting a Beeline office, you can ask a consultant to activate this service, which he will do completely free of charge.

MMS settings in automatic mode


After activating MMS, you need to configure the service correctly to open access to send and read messages. To achieve this goal the following actions are required:

  • Follow the link “Beeline MMS Settings” to go to the menu for providing MMS settings for a specific device model in automatic mode.
  • In the list that opens, select the required model of your mobile device or manually write its name.
  • Next, you need to click on “MMS”, and then on “Yes, go to MMS settings”
  • If automatic installations available for your phone, then you need to dial your phone number in the window and click “Send settings”. In situations where settings are only available in manual mode, you need to read the instructions for your device model and follow them in a consistent manner.
  • It is necessary to apply the MMS configuration files, which will be sent automatically, and then reboot the mobile device. In addition to the considered option for receiving automatic settings, you can also receive them free of charge by calling the number 060432 .

After rebooting the device, the option will become available for use.

Manual setup of MMS Beeline

Sometimes situations occur when the user does not have the opportunity to visit the site and obtain data about the MMS service settings manually for specific device. In such situations, you need to create an MMS profile in your phone settings.

Data for creating a profile:

  • Name: Beeline MMS;
  • APN: mms.beeline.ru;
  • Login and password: beeline;
  • MMSC: http://mms;
  • MMS port: 8080;
  • MMS Proxy: 192.168.094.023;
  • Protocol: MMS;
  • APN type: mms;
  • Authentication type: PAP.

After saving the profile with the specified information, you should reboot mobile phone, after which the service of sending and receiving MMS will become available.

The mms option is a service that allows you to send messages to other users mobile communications various files, for example, an audio recording, a photograph, a large text message and more. Today such a service is not particularly relevant, because with the development modern technologies and the presence of various applications or social networks, to exchange the above files, pay sending mms It's just not practical.

But still, there are situations when it is not possible to access the Internet, but you simply need to send a file, then mmsky really helps out. Very often, subscribers, when trying to send a multimedia message, encounter an error and do not understand why it occurs.

The point is that in order to successfully send mms you must first configure this service on your phone. This process is easy and does not require much time. There are two options for setting mms messages. The first is to order automatic settings on your mobile, and the second is manual settings. In this review, we will consider in detail two methods so that in the future subscribers will not have any difficulties in working with the mms service.

It should be immediately noted that the MMS service itself is a basic option of the subscriber’s SIM card and is enabled by default for all clients mobile network. But there are times when it can be disabled. Perhaps the subscriber previously turned off Internet access, etc. But you can always reactivate MMS, especially since connecting such an option is absolutely free. To activate the service you need to log into your Personal Area, select the appropriate section and click “connect”. Or dial the combination * 110 * 181 # from your phone. After which you will receive an SMS confirming the activation of the service. Then comes the next stage - ordering automatic settings. To do this, the subscriber can use several methods, namely:

  • call the Beeline support service at 060432, indicate your phone model and get the settings, or contact the operator and telephone conversation set up your phone;
  • go to your personal account and place an order for settings yourself;
  • contact the customer service center and set up your phone in person with the manager;
  • On the company’s official website, select the “mms service” section, click on your cell phone model from the list provided, and then send the settings to your phone.

But that’s not all, you need to know how to set up MMS on a Beeline, when the settings are received automatically. With any option for ordering automatic settings, the subscriber receives an SMS message, the phone will ask to save it. After completing this procedure, you must restart the device, that is, turn off the phone and then turn it on for the new profile to be activated. That's all! Now you can successfully send MMS messages. In order to be able to receive them in the future, after the phone is configured, you need to send the first mms. If the first message is not sent, the person simply receives a regular SMS with a link where he can view the information in the sent MMS. In the future, the service works correctly, but if the phone model changes or a SIM card from another operator was temporarily installed, then the entire setup procedure must be repeated again.

Manual setting

But there are often cases when SMS with automatic settings does not arrive on the subscriber’s phone. There is only one reason - the billing system mobile operator cannot recognize your phone model, this happens with Chinese cell phone models, or with mobile phones that were imported into the country without a license. There is only one way out here - manual MMS Beeline settings.

The principle of operation is the same as with automatic ones, only all the data must be entered manually in your phone. To do this, we order an SMS with manual settings, where the access point, the correct network, proxy, etc. will be indicated, after which this data must be entered into your phone. The list of actions is as follows:

  • go to your phone menu and select MMS message settings;
  • then open the menu for entering data;
  • enter beeline mms in the profile name field;
  • in the access point field mms.beeline.ru;
  • all other fields, as a rule, are already specified, they are standard, and are corrected only in case of mismatch;
  • then choose to save the new profile;
  • After saving, a green pendulum (button) should light up opposite the required access point.

In conclusion manual settings reboot your phone and send the first test MMS message to any subscriber.

If you encounter any difficulties with the settings of MMS messages or Internet access, you can always call the company’s operator and get advice, or contact the company’s customer service center with a passport and telephone number.