In order to provide the maximum level of security, developers from Microsoft have disabled the default built-in Administrator account in the entire family of operating systems. Windows systems. But this is not always and not always convenient for everyone, especially if the computer is at home, with good antivirus and connected to the Internet through a router. To log in as an Administrator to Windows 10, you must first activate this hidden account. There are two ways to do this, which I will tell you about now. The only advice is that you should not enable the Administrator unless there is a good reason for this - this will be a significant breach in the security of the system.

Standard administrator account activation

At work Windows desktop 10 find the "This PC" icon and click on it right click mice. Select an item from the menu Control:

After that, the "Computer Management" window should appear, on the left side of which there will be a navigation menu. Find the "Local Users" -> "Users" section:

The entire list of users available in the system will appear in the left part of the window. To enable Administrator in Windows 10, double-click on this account. The Properties window will open. Find the item "Deactivate account" and uncheck the box next to it. Click on the "Apply" button and close the window.

Open the "Start" menu and look at the list of users by clicking on the button with a little man - the line "Administrator" should appear there.

How to enable Administrator via command line

This method is usually used by more advanced users who are "friends" with the console. It is also perfect in the case when the main account is locked and you start Windows 10 in the "Diagnostics and Recovery" mode.

So, you need to run the command prompt with Administrator rights. Most fast way to do this - right-click on the "Start" button and select the appropriate menu item.

Then type the following command in the console line:

net user administrator /active:yes

After entering, press the "Enter" key.

The result should be a message that the operation was successful.

Note: To later turn off the Administrator account in Windows 10 again, enter the following:

net user administrator /active:no

Then press the "Enter" key to execute the command.

Many problems, such as cleaning your PC of malware, fixing errors after installing drivers, starting a system restore, resetting passwords, and activating accounts, are solved using safe mode.

Safe Mode or Safe Mode is a special diagnostic mode in Windows 10 and other operating systems, in which you can start the system without including drivers, unnecessary Windows components. It is used, as a rule, for troubleshooting and troubleshooting. Consider how you can get into Safe Mode in Windows 10.

Method 1: System Configuration Utility

The most popular way to enter safe mode in Windows 10, this is the use of the configuration utility, a standard system tool. Below are the steps you need to go through in order to enter Safe Mode in this way.

Method 2: Boot Options

You can also enter Safe Mode from a booted system through the boot options.

Method 3: command line

Many users are used to the fact that you can enter Safe Mode when you reboot, if you hold down the F8 key. But, by default, in Windows 10, this feature is not available, as it slows down the system startup. You can fix this effect and turn on the figurative start of safe mode by pressing F8 using the command line.

Method 4: Installation media

In the event that your system does not boot at all, then you can use the installation flash drive or disk. The procedure for entering safe mode in this way looks like this.

1. Boot the system from the previously created installation media.
2. Press key combination "Shift+F10", which launches the command line.
3. Enter next line(command) to start safe mode with a minimum set of components
   bcdedit /set (default) safeboot minimal
   or string
   bcdedit /set (default) safeboot network
   to start with network support.

In these ways, you can enter Safe Mode in Windows 10 and diagnose your PC with standard system tools.

Usually, to log into the Windows 10 system, we use a password, but Windows 10 offers us other authentication methods:

• A four-digit PIN code that is much easier to remember and type than a regular password. In addition, there are no problems with the keyboard layout. Windows 10 will prompt you to switch to this type of authentication during installation.
• A graphic password is a new interesting feature designed for devices with touch screens, primarily tablets. With this method Windows logon 10 invites you to select a picture and then make several finger movements on it: for example, you can draw a circle, a square or an arrow on the picture. Windows will remember your movements and show a picture next time instead of the usual login screen - repeat your masterpiece, maestro!

You can configure Windows 10 sign-in in the Settings menu, under Accounts >> Sign-in options.

When entering a password, do not forget about the CASE of letters (a and A in the password are completely different characters), as well as the keyboard layout. Most of the problems with logging in are connected precisely with the fact that users type the password not in Latin, but in Russian letters, since it is the Russian keyboard layout that is set by default. In addition, we do not see what exactly we are tapping on the keyboard, because the password is always hidden under the “asterisks”. You can switch from one layout to another using a combination of "hot keys" Right

In the Registration Policies section, you can specify whether Windows should ask for a password when waking up from sleep mode, or just boot without too much paranoia (it's not a sin to take care of security in the office, but at home ... In a word, it's up to you).

One of the most interesting news Windows 10 has a biometric login system Windows data Hello: now the operating system can recognize the user by fingerprint, face and even iris! True, not all devices support such a “master key”: first of all, Hello is designed for owners of tablets and laptops with special cameras, the choice of which, alas, is still small.

Automatic login to Windows 10 without a password

Is it possible to make Windows 10 automatically boot without entering a password? If there is only one account on your computer, this is quite realistic. True, for this we have to do this trick.

Use the hot keys "Windows" + "R" to bring up the menu command line and type the netplwiz command into it. In the menu that opens, uncheck "Require username and password". Click the Apply button, and then fill in (twice) the login password field.

Experienced PC users are aware of such a Windows option as "Safe Mode". It is necessary in modern operating systems, because the latter are by no means sinless. Mistakes happen, and sometimes they cannot be corrected in working order. With XP and 7 everything was more or less clear. But with version 10, things got a lot more complicated. Standard login to safe mode disabled. Now this is not so easy to do. What caused such a decision of the developers is not clear. But the fact that the seventh version was much more understandable than the newfangled "tens" is undeniable. However, in the days of XP, they said so. So, most likely, users will get used to this "miracle". So how do you enter safe mode in Windows 10? We'll talk to them about it.

What is "safe mode"?

Safe Mode is a way to boot the system with only the most important drivers. That is, only those components that are necessary for the minimum system performance will be loaded. No additional codecs, flash and other unnecessary nonsense. This mode is used to fix operating system errors, return to an earlier state using system restore. Also, some viruses can only be removed in this way. Therefore, everyone needs to know how to enter Windows 10 safe mode.

Sometimes this state of the OS requires an "account" fix or a local conversion. Naturally, to carry out this procedure, you need access to the Internet. And here the option "Safe Mode with Network Driver Loading" will help. Users of "dozens" need to choose this option, because to fix account it won't work without the internet. And this brings us back to the question of how to enter safe mode.

How to log in if the OS starts up?

There are various options for booting "dozens" in safe mode, if everything works fine. The easiest way is to click on "Shut down" in the "Start" while holding the "Shift" key. Then you will be prompted to select the type of download. It remains only to choose the one you need. Also try to "bring back" the launch of the mode when you press F8. You just need to write the desired text in the command line. How to enter safe mode in Windows 10 via command line? More on this below.

There is one more option. Enter "Options" and further - A lot of unnecessary text will appear with the available options. Among others, there will be items "Restart the computer in safe mode" and "Restart the computer in safe mode with support for network drivers." Choose the one you need this moment, and restart the PC or laptop.

You can also try this procedure. Go to "Start", select "Run", type "msconfig" (without quotes). A dialog will appear with a "Download" tab. Among the fair amount of items there will be "Boot Options" and "Safe Mode" with a bunch of options. This is where it should be ticked. And then just restart your PC.

Using the command line

Go to "Start", select the "Command Prompt" item and enter the text in the commander: "bcdedit / set (default) bootmenupolicy legacy" (without quotes). Then reboot the machine and press F8. The Windows start options window will appear. Here we select "Safe Mode". Will they need network drivers- decide for yourself. This is one of the answers to the question of how to enter safe mode

A variety of problems are usually solved through the commander. But in the "top ten" it is best to use Windows Power Shell - a console borrowed from the Linux OS family. This tool allows you to run commands as an administrator and is much faster than the standard commander. Yes, and it is clearer to those who have ever used Ubuntu or Mint. The command line method works on any Microsoft operating system (except XP). The company from Redmond did something adequate. Honor and praise to her!

What to do if the OS does not start?

There is only one way here. You won't be able to start Windows in Safe Mode. Therefore, you need a flash drive with the "dozens" distribution kit. When loading the installer, you can turn the trick with the commander and force Windows to boot from the HDD in safe mode. You just need to find the inscription "System Restore" in the welcome window of the installer. A commander will appear there, into which we enter the text already familiar to us (without quotes). Now restart your PC or laptop. This is one of the answers to the question of how to enter Windows 10 safe mode through BIOS.

Many people think that if the operating system does not want to work, then the easiest way is to reinstall the OS. On the one hand, this is true - a clean system always runs faster. On the other hand, frequent reinstallations operating system- certain death for hard drive. Not to mention a lot of time to kill on full customization systems. This does not include installation time. Therefore, it is easier to solve all problems that can be fixed using safe mode.

ASUS laptops

There are some nuances here. The fact is that ASUS laptops have a kind of entrance to the boot menu (media selection during boot). Before performing actions with the commander in the "dozens" installer, you need to force the laptop to boot from the drive with the distribution kit. To do this, just hold down Tab at startup and select the desired boot type. How to enter safe mode in Windows 10? ASUS - the same PC. That is, the method with the commander from the "dozens" installer also works.

In general, Asus laptop manufacturers have their own concept of convenience and ergonomics. That is why the engineers have moved away from the standard canons and assigned some insane keys for low-level control of the laptop. Therefore, before trying to change the BIOS settings, you need to read the instructions very carefully. Otherwise, your "correct and standard" actions can lead to very sad consequences.

Acer laptops

The most problematic in this regard is the E5-731 laptop. In order to get into the boot menu of this laptop, you need to do a number of operations. First you need to press Enter to get into the BIOS of the laptop. Then move to the "Boot priority" tab and select our flash drive with the "dozens" installer. Now be sure to reboot the device. The laptop will boot from the drive, not from the HDD. How to access Windows 10 Safe Mode in Acer E5-731? Using the commander in the installer. Exactly the same as in the previous examples.

With Asers, everything is somehow incomprehensible. This way to get to drives with distributions was used in ancient times. system blocks with processors from AMD and Why the manufacturers decided to choose this particular method is unknown. But in this situation, after manipulating the commander, you will have to return to the BIOS again and set the start from the HDD as a priority. And this is quite inconvenient.

Lenovo laptops

How to enter safe mode in Windows 10 through the BIOS of laptops from Lenovo? Here is the easiest. It is enough to press the F12 button at the start of the device - and the media selection menu will appear. We select a flash drive and boot. And then we act according to the already known scenario with the command line and the right team. Laptops from Lenovo are the simplest in this regard. The Chinese company clearly knows a lot about ergonomics.

In general, Lenovo laptops are in no way inferior to more famous brands in terms of quality and location of controls. And in the case of Windows 10, they behave more adequately than other models. There's even an interesting Safe Mode option for those using UEFI. It is enough to hold Delete at the start - and launch options will appear. Well, why not charm?

Conclusion

Of course, entering Safe Mode in Windows 7 was much easier. But even in the top ten, it's just that the developers made it less accessible. But with the help of certain commands or actions, it is quite possible to boot the operating system in this mode. And after that, you can fix the errors of the drivers, the operating system itself and its components. The main thing is to do everything clearly according to the instructions. Then there will be no problem.

If none of the above methods helped to fix system errors, that is, at least two paths. The first is to reinstall the entire operating system. This advice is not devoid of common sense, since the latest Windows always works better and faster. If you do not know how to install, or you do not have free time, then there is only one way out - to bring your laptop or PC to the professionals in the workshop. They will do everything quickly and painlessly. But it will cost money.

What is safe mode in Windows 10 and how to get into it if the operating system does not boot? If you have problems booting Windows 10 (or 8.x), you can't use the usual "lifeline" as provided in Windows 7 - using the F8 key during computer startup to access additional boot options. In particular, in this way in the seventh version, you can get into safe mode (safe mode) and try to solve the problem regular means. For example, if uninstalling the driver or changing the system settings. The Shift + F8 keys, which in theory can be used when loading Windows 10 to get into the system recovery environment (and this is an analogue of the Seven boot options), are not so easy to apply in practice. You will need to practice several times to catch the very moment of reduced system boot when the Shift + F8 keys can work.

Why is it needed?

Safe Mode is a specific Windows state designed to resolve various problems.

In this case, only the most necessary devices and components for maintaining the OS are involved. Safe mode is, by condition, working with administrator rights, it also allows you to delete files that the system or a third-party software will not be allowed to be removed under normal conditions.

OS safe mode - the environment used for uninstallation incorrectly installed drivers and undoing unsuccessfully applied system settings. For example, when setting a screen resolution that is not supported by the monitor, it will not always be possible to change it to the latter supported within the framework of a fully working system. So, there may simply be no image on the screen, and if there is no other monitor at hand that can display the picture with the applied resolution, the problem cannot be solved except by using safe mode. Instead of a video driver, the monitor uses the VGA standard, which is supported by all video cards designed for Windows devices.

Safe mode is one of the solutions to the problem of viruses penetrating the OS that block the work antivirus programs. If malware has not damaged part system registry, which is responsible for loading safe mode, you can try to run virus scanner, delete the startup file and / or the virus process in the task manager, and also apply other actions to resuscitate the system.

Running system configuration section

Using the configuration section of a running system, you can get into Windows 10 safe mode by making some settings and rebooting. Right-click on the "Start" button and select the "Run" function.

In the field for entering commands, write:

msconfig

After pressing Enter, we will see the system configuration window. We are interested in the "Download" tab, here we tick the "Safe Mode" item.

By default, the system configuration provides for the minimum type of safe mode when startup programs do not start, there is no sound, the network is turned off, only the basic drivers of the video device, hard drive, mouse, keyboard and other devices work, which are necessary to maintain a minimum operating system performance.

For safe Windows mode 10 you can install other types of it. By selecting the “Other shell” item, the safe mode will be without the usual graphical interface, but only with the command line. This may be relevant in the event of a failure of explorer.exe, a system service that ensures the operation of the OS explorer.

The item "Restore Active Directory" provides for loading safe mode from GUI and the minimum number of active services, including the Active Directory directory service. If you need to access network resources, then in this case you need to select the "Network" item. It provides, respectively, the operation of the driver network card.

Having decided on the choice, at the bottom of the window, click "Apply", and then "OK".

After re Windows boot will start in safe mode.

The process of configuring Windows 10 to boot normally is reversed. In the system configuration section, the "Safe Mode" checkbox must be unchecked.

Shift key and reboot button of a running system

Another way to get into safe mode, if Windows is in a healthy state, is to use the simultaneous pressing of the Shift key and the restart button. Open the "Start" menu, click on the shutdown button ("Shut down") and, while holding down the Shift key on the keyboard, select the option to restart the computer.

That's how we get on Wednesday Windows Recovery 10. Here we need first the diagnostics section, then the additional parameters section.

All sorts of boot options will appear in front of us - by pressing the F4, F5 or F6 keys, you can get into the appropriate type of safe mode.

Safe Mode Unbootable System

If Windows does not start at all or, for example, a resolution that the monitor does not support is mistakenly applied, displaying a message about this on a dull black background of the screen, you can boot into safe mode and try to find a solution to the problem, as in the previous case, using the system recovery environment .

As mentioned above, pressing Shift+F8 during Windows boot may not always work, so the more reliable way to get into the recovery environment is to boot from installation disk or from, created earlier by the regular means of the system.

When booting from the latter, we get into the recovery environment immediately after choosing the language. If the computer is booted from the installation disk, click "Next" in the welcome window.

Next steps - "Diagnostics" and " Extra options».

In the command line window, write:

bcdedit /set (globalsettings) advancedoptions true

and press Enter.

The operation was successful, close the command line and click continue in the action selection menu Windows usage 10.

Then we will see a list of download options.

If in safe mode it is possible to eliminate the cause that prevents booting, and reinstalling the system can be avoided, in the future the computer will always boot from the boot options menu. It is very easy to fix this using the same command line, which we now open by selecting from among the contents context menu on the start button.

We enter the command:

bcdedit /deletevalue (globalsettings)advancedoptions

and press Enter.

Everything - now the computer will boot as usual, without any pre-boot states and menus.

Have a great day!