How to remove apple id activation lock. Ways to bypass iPad activation lock. Ways to unlock using Apple ID How to jailbreak a locked iPhone 5

  • How to unlock an iPhone locked by icloud?
  • How to bypass iCloud activation?
  • How to unlock iCloud by imei?
  • Can iCloud be unlocked on iOS?
  • I bought an iPhone, reset all settings, turned it on, and it asks for Apple id, what should I do?
  • How to delete icloud if you forgot your password?
  • How to bypass Activation Lock?
  • How to bypass iCloud activation lock?
  • Bypass activation apple id, how to do?
  • There is someone else's Apple ID in my iPhone settings. What to do?

Let's start with what is Activation Lock?

After the release of the operating system for the iPhone - iOS 7, Apple introduced a new protective function Activation Lock, which allows you to check whether it is enabled or disabled on your iPhone lock activation. It serves to protect the iPhone and all its owner’s data in case of theft or loss. When the function is activated, the device cannot be used without entering account information. iCloud recordings- in other words, Apple ID.

You can check your activation lock status here Activation Lock. After entering IMEI or serial iPhone numbers, which can be found in the “About the device” section of the main settings of the smartphone, as well as test letters and numbers, you will find out whether it is turned on this function or not.

After a reset or update, only the owner can activate an iPhone linked to an Apple ID by entering the last active account information. When buying an iPhone online on eBay or in person, many users do not think to check whether the iPhone is unlinked from the previous owner’s account.

Therefore, when buying an iPhone from someone else, you need to make sure that the previous owner deleted his account iCloud. Go to the “Settings” - “General” - “Reset” menu, select “Erase content and settings”, then you need to confirm the reset. If after the reset you see a window for entering your Apple ID and password, the device is linked to the Apple ID and iCloud of the owner of the iPhone or the “Find iPhone” function is enabled. In this case, this phone is not untied from iCloud and it is not recommended to buy it. Ask the seller to confirm the Activation lock by entering your e-mail and password, then turn off the “Find iPhone” function in your phone settings. And try resetting again. Otherwise, when the reset occurred without asking for a password, the device is not tied to the Apple ID and can be purchased.

What is iCloud and Apple id?

iCloud is an information storage from Apple that allows users to access their music, photos, documents and other files from any device and also saves backup copies iPhone data and iPad, helps the owner find lost devices and allows you to share photos with other people.

Identifier Apple ID- this adress Email, which is used as a login name for almost all Apple services. With it, you can use iCloud to store content, buy songs, movies, and TV shows from the iTunes Store, and download apps from App Store.

The problem of bypassing iCloud activation lock has become a sad problem for users who unsuccessfully purchased an iPhone secondhand. You need to know that neither flashing nor resetting the settings will help remove the binding of the iPhone to the Apple ID of the previous owner. Therefore, we decided to write general recommendations on how to unlock iCloud for Apple phones not officially acquired. The problem with many people buying second-hand iPhones is that they are trying to save thousands of dollars on very important things. You need to buy a used iPhone with a complete set, which includes the iPhone itself, headset (headphones with microphone), USB cable, Charger(block), a box with a sticker on which IMEI and serial number match the data on the phone and preferably a sales receipt. If the seller cannot offer you this, then the likelihood that your iPhone will become an unusable “brick” in the coming days is very high!

How to remove Activation Lock and change Apple ID?

1 .To unlink your Apple ID from the previous owner of the phone, you need to write an official letter to Apple support, add a photo of your iPhone, as well as stickers from the box and sales receipt. If you have a complete set with a box and a receipt, proceed to the next step 3 “Drafting a letter”. If you don't have them, you need to make them yourself!

2 We need a box for an iPhone in any case. First, you need to scan the stickers from the phone box (you need to find the box from the iPhone model you need) and based on these layouts, make stickers with your iPhone data (IMEI and serial number). Apple looks at Serial No. the most. We do not recommend saving; make stickers on high-quality paper and a good printer.

3 .Now we need to make a receipt for the purchase of the iPhone. It can be made in a cash register emulator and printed on a printer, but remember that you may be held accountable for counterfeiting a receipt. You can try to write the first letter without a receipt, indicating that the previous owner did not save it. So, what should be indicated on our check: iPhone model(iPhone 6S 16 Gb Space Gray), IMEI (must contain 15 digits 353313071931976) and serial number (FK8QGSF0GRY5)

4 .After you have prepared the box and receipt, which confirm that you are the owner of the iPhone, you need to take a photo. Place your iPhone on the table rear panel up, a box with a sticker and a receipt, take a photo so that all the components fit in one photo.

5 .We write a letter by e-mail: . If you receive a response that your iPhone is locked with the Find My iPhone function (Apple regards this as stolen), then write to [email protected]

6 .In the subject line of the letter we write Case 22153744. Activation Lock. Purchase Validation. (Case 22153744 is the number of your first email to Apple support) How to find out Case? We go to the Apple support website in Russia. Now you need to fill out the application form, click “Start”, then select your device. You need to set “Service Request and Troubleshooting” where you need to select – it is not possible to lock or unlock your phone. Next, select “schedule a call”, indicating the iPhone serial number (FK8QGSF0GRY5), first name, last name, phone number and your e-mail. And in a couple of minutes you will receive a letter with the assigned Case number, and you may also receive a call.

7 .An example of a letter to Apple support to unlink Activation Lock and replace Apple id.

Hello. Case 22153744 . I have a problem with activation my iPhone 6S. I have bought the iPhone in a shop one week ago and update iOS 11.1 yesterday. After update iPhone has an activation screen and asks previous owner’s Apple ID and Password. I don’t know Apple ID and Password; I haven’t communicated with him. I can't use my iPhone for 2 days. I am so disappointed in this situation. Can you help me to disable this function, please? Serial No of my iPhone is FK8QGSF0GRY5and IMEI is 353313071931976. I attach photos of the box and the sales receipt.

Best Regards,
I have a problem.

8 .The answer will come within 5-10 days. The response will say that your problem has been assigned a number in the system and we need to wait for a letter from Apple with something like this:

Hello. Thanks for sending the proof of purchase for this product.
Product: iPhone 6S
Serial number: FK8QGSF0GRY5 After reviewing the provided documentation, we unlocked the product.

If you need help, use Contact Apple Support to start your support request online and get connected to an expert.

9 .After receiving a response from Apple, you can safely activate your iPhone and make new Apple id. If we do not receive a response, we will write a second letter to [email protected]

How to delete an iCloud account (Apple id) without knowing the password?

If you have an iPhone or iPad that is linked to accounting Apple records id and the function is enabled “Find My iPhone ON”. You don’t remember your iCloud password or you have become a victim of an unscrupulous seller and there is someone else’s account on your device in the iCloud settings, in which case you should not be upset because we have found a solution on how to delete the icloud account of a previous user!
So, we would like to introduce you to the software iRemove Tools– the best solution for unlocking iCloud (Apple id) on any iOS device: iPhone, iPad, iPod Touch (WIFI or GSM).

Why is this the best solution for Apple iPhone, iPad linked to an iCloud account?

  • The service is fully automated; you don’t need to be “technically savvy”; the program will do everything for you!
  • Support ALL versions iOS(latest version iOS 11.2)
  • The program is suitable for everyone mobile devices Apple iPhone, iPad and iPod Touch
  • Support Windows 7 (x32 x64), 8, 10
  • It only takes a few minutes to bypass/remove iCloud!

How to delete an iCloud account if you forgot your password using the service iRemove Tools:

Step 1. Make sure your iOS device has iCloud account, which needs to be deleted.
Step 2. Download the program iRemove Tools
Step 3. Launch the program and connect your iPhone or iPad to your computer with via USB Lightning cable.


Step 4. Now you need to allow the program access to your iPhone or iPad on the device itself by clicking on the warning "Trust this computer"
Step 5. If you did everything correctly, the program will determine the name, model, IMEI, serial number, iOS version and your device's phone number.


Note! If your Apple device (iPhone or iPad) has an Apple ID activation lock or is activated "lost mode" program iRemove will not be able to delete your iCloud account. Below you will see a message that this device not supported "Unfortunately, your device is not supported»

Step 6. If you see a message “Congratulations! Your device is supported" this means that your iPhone or iPad is supported by the iRemove Tools program and you can remove the Apple id account of the previous owner! Click on the button "Make Paymant" andrequest iCloud removal service, fill out the form and pay.
After payment, the IMEI and serial number of the device will be automatically added to the iRemove Tools database and you will be able to use the program!

Step 7. Click "Remove iCloud Account" to begin the process of deleting your iCloud (Apple iD) account. You will also see a warning that in addition to your iCloud account, all photos, contacts, reminders, notes, etc. will be deleted from the device. In short, all iCloud-related information will be erased.

Step 8. Now on the Apple device itself you need to go to "Settings > General > Reset" select item "Reset all settings". After the reset, the device will reboot and the removal process will begin, which lasts several minutes; do not disconnect the Apple device from the computer.

Step 9. After completing the account deletion process iCloud (Apple id) on iPhone screen, iPad welcome message appears. The deletion process is complete and you can set up the device as new, create your own Apple id account or enter an existing one and use it without any problems.

That's how it really is, it's simple. Now you know how to remove iCloud from an iPhone or iPad without knowing your account password.

*Important!

After unlocking iCloud using imei, you can link the device to your account and enable the function “Find iPhone”, create ID Apple id and download any applications on iPhone / iPad, but you only need to update the firmware directly from the phone via Wi-Fi ( « over the air update » ), do not under any circumstances update your iPhone or iPad via iTunes. Also Not recommended do a full reset "Erase content and settings" since the program iRemove Tool does not completely remove the device from the Apple server! After full reset settings, the previous owner's Apple id account will appear again in iCloud settings.

More and more users are thinking about jailbreaking every day, but since this is “pure hacking,” many are afraid to do it. It is worth noting that after jailbreaking, the device receives many new features, arousing interest among users. Jailbreak has both advantages and disadvantages, after reading which you can decide whether it’s worth hacking your gadget.

What is jailbreak

Jailbreak is a procedure for hacking the iOS operating system, allowing the user to obtain unauthorized access To file system Apple devices. A jailbreak is performed by identifying vulnerabilities in the Apple security system, thanks to which the user gains access to previously inaccessible system files. After jailbreak, the owner of the gadget under iOS control can manage the contents of the file system and install various programs from third-party application stores, in addition to the main one from Apple (App Store). Users of a “hacked” iPhone and iPad, as before, have access to all functions of the device, including iTunes and the App Store.

One of the main functions of jailbreak is the ability to modify iOS functions, as well as customize the iPhone or iPad interface.

Why do you need it for an iPhone or iPad?

By using jailbreak, the user receives another additional Cydia application store, containing those applications that are not available in the App Store or iTunes. Considering that thanks to jailbreak it becomes possible to modify iOS, Cydia contains all those applications that will help customize the operating system to the user’s taste. Cydia also has a huge number free applications, which are distributed for a fee in the App Store. It is worth noting that everything free programs from Cydia (popularly known as “tweaks”) are just copies of licensed applications, which in most cases are paid.

Advantages

  1. Additional Cydia app store. Most Apple users decide to jailbreak just for the sake of Cydia, which provides the ability to download free applications that are distributed on the App Store for a fee.
  2. Customize the iOS interface and functionality to your taste. Jailbreak allows you to change appearance and the content of the operating system by downloading specialized applications from Cydia.
  3. Hidden Apple capabilities devices and file system access. Jailbreak will allow users not only to take advantage of hidden possibilities iOS, but also gain access to the file system, which will make it possible to control the operating system and change source codes.

Flaws

  1. Possible problems with downloaded applications. Since tweaks from Cydia are not licensed applications, but only copies, problems with the stability of their operation are more common, and their use can lead to the crash of licensed applications that previously worked stably.
  2. Different tweaks - different problems. After installing or deleting any tweak downloaded from Cydia, a system cache of the tweak (garbage) remains in the system, which will remain on the device forever, and there have also been cases of incompatibility between tweaks, which is why they do not work.
  3. Problems with iOS update. It is impossible to update iOS on a jailbroken device, and when an update is released, the jailbreak always crashes, which is why all downloaded tweaks from Cydia and interface changes are deleted.
  4. Deprivation of technical developer support and Apple warranty. If the device needs to be repaired, the user will have to get rid of the jailbreak, and if they need to use the warranty, the service center will refuse service.
  5. Security of Apple devices with jailbreak. Hacking a gadget will expose it to viruses, which can subsequently lead to the loss of personal data, including information about payment options (bank card details).
  6. Battery autonomy has been reduced. operating system iOS is closed for a reason, because Apple developers optimize the level of load on system hardware in order to balance battery power consumption and maximize battery autonomy.
  7. Loss of communication quality. Many users have noticed that jailbreaking can affect the quality of calls during calls. These problems manifest themselves as frequent interruptions in communication, and sometimes even distortion of the subscriber’s voice.

Types of jailbreak

An untethered jailbreak is performed once and works until the next firmware is released. This type of jailbreak is based on vulnerabilities that make it possible to gain access to the file system every time the gadget is booted without any other intervention.

A tethered jailbreak gives the user access to the file system of Apple devices only until the first restart or shutdown of the device. When you reboot a gadget, you often encounter problems with its startup, or the device will start, but some tweaks will stop working or disappear altogether.

Installation instructions

Using a computer

To jailbreak, the user needs to download free software Pangu 9. Before you start the hacking process you need to:

  • Update iTunes on your computer to the latest version.
  • Create backup copy data via iTunes or iCloud.
  • Turn off screen passcode and Touch ID protection (Settings > Touch ID & Passcode).
  • Turn off Find My iPhone (Settings > iCloud > Find My iPhone).
  • Activate Airplane Mode in Control Center.

How to jailbreak - step by step guide

After the subsequent reboot of the gadget, the jailbreak process will be successfully completed, as indicated by the message “Jailbreak completed”.

Without the help of a computer

  1. Open this manual in Safari browser on your iPhone, iPad or iPod touch.
  2. Follow the link itms-services://?action=download-manifest&url=https://www.iclarified.com/jailbreak/pangu-pp/jailbreak.plist and click “Install”.
  3. Wait for the download and installation of the PP application required to perform the jailbreak.
  4. Go to Settings > General > Device Management.
  5. Select the developer profile that appears there and in the window that opens, click “Trust.”
  6. Launch earlier installed application PP.
  7. Agree to receive notifications.
  8. Click on the circle located in the center of the screen and lock the device by pressing the "Power" button.
  9. Wait until your device reboots, then launch Cydia to check the jailbreak installation.

Do not respond to incoming notifications during jailbreak installation.

After all the steps completed, the jailbreak is installed, without using a computer or Apple ID account information.

Key tweaks worth Jailbreaking for

How to delete on iPhone or iPad

Today, there is a special tool with which you can remove jailbreak, while resetting all settings to factory settings and without using any flashing.

Before you begin removing jailbreak, you need to perform a number of actions, namely:

  • Create a backup via iTunes, iCloud.
  • Connect your device to the Internet (optimally via Wi-Fi).
  • Charge the device at least 20%.
  • Insert SIM card.
  • Make sure that the device is linked to your Apple ID using Find My iPhone (if enabled).

Instructions

  • First you need to go to Cydia.
  • Go to the BigBoss repository, which is installed by default, and find the Cydia Impactor application.
  • Next you need to install Cydia Impactor.
  • After successful installation, Cydia Impactor will appear on the desktop of the device and you need to launch it.
  • After opening Cydia Impactor, text in English will be displayed on the screen, under which you need to click on the “delete all data and unjailbreak device” button.
  • Next, you need to click on the “Delete all” button, after which the jailbreak removal procedure will begin. During removal, under no circumstances should you press anything, but just wait about 10 minutes.
  • Once the removal is complete, the device will reboot on its own and will need to be reactivated.

Possible problems and ways to solve them

Problems with jailbreaking are very common, but their solutions are quite simple.

Error 0A (stuck at 45%)

This error appears during jailbreak, while the utility freezes at 45-50%. To solve the problem, you need to connect your device to your computer, open iTunes (must be the latest version) and find your gadget in the list. Next, go to “Backups” and uncheck the “Encrypt iPhone backup” checkbox. After these steps, you need to try jailbreaking again.

Start button gray

If the “Start” button is gray and not clickable, this means that Pangu 9 does not allow you to start jailbreaking your device. To make the “Start” button clickable, you need to disconnect the device from the computer and install the latest version of iTunes and try again. If the latest one is installed iTunes version, but the “Start” button is still gray - try running iTunes as an administrator or reconnecting to the Internet.

Cydia icon does not appear

It often happens that the jailbreak procedure was successful and without errors, but the Cydia application store did not appear on the device screen. This is explained by the fact that the Pangu utility was not allowed access to “Photos” in time. To solve the problem, you just need to re-hack the device by manually allowing access to the “Photos” application of the Pangu. Having done this, Cydia is guaranteed to appear on the gadget’s screen.

Cydia won't launch

There are cases when the jailbreak was successful, there were no errors, Cydia appeared on the screen, but the attempt to open it ends immediately after clicking on the icon. To solve the problem, you need to reset the device to factory settings, and then update the firmware version (if there is an update). Next, it is recommended to create a backup copy or check its availability if it has already been created and try to launch Cydia again.

The user can decide for himself whether it is worth jailbreaking his device, based on all the advantages and disadvantages of this procedure. After jailbreaking, a huge number of opportunities appear, which is worth just customizing the device interface to your taste, but is it worth depriving your iPhone or iPad of warranty service for this? - a question that more and more users of gadgets running iOS are asking.

Apple is famous for its attitude towards security and the system as a whole. Authentication systems and multi-level protection are created to ensure the safety of users and protect their personal data from hackers. However, it happens that these same hackers select passwords and then the owner of the phone is faced with an unpleasant situation: the hackers block the phone using icloud and demand money. So is iCloud bypass possible? Is it possible to bypass it on iPhone 5s and is the procedure different for iPhone 4s or iPad?

Now it’s 2017, Apple cares about security and every month corrects the situation, closes “holes” in the system and helps users recover data. And there, information that is relevant now will quite possibly cease to be relevant in a month or even a week. Now we will figure out what methods existed before and contrast them with modern ones.

What methods have been used before?

The idea is to bypass Activation Lock technology impossible. This is what the company itself claims, because they use a system called siriport. And it doesn’t matter whether a person has an iPhone 6 or an iPad – the system and technology are the same. However, every month a new and new method appears.

For example, in 2014, hackers and programmers found ways to intercept the signal that goes to iCloud. Having intercepted its signal, it is sent to another server - doulCi. This method is considered part of jailbreak, which many users deliberately undertake if their device is already hacked. However, hackers obtain all personal information, and the phone no longer supports SIM cards. But instead of a “brick,” the user at least receives a working device.

To bypass Activation Lock , there was an entire manual that many followed to become “free” from Apple’s “surveillance.” Through the computer and the host folder where iTunes is installed, people had to find a file in which certain lines of code were written:

  • 188.226.251.76 albert.apple.com
  • 188.25.246.35 albert.apple.com
  • 162.253.154.177 albert.apple.com
  • 109.120.169.64 albert.apple.com
  • 41.214.225.246 albert.apple.com
  • 197.247.122.170 albert.apple.com

After this, certain manipulations were done with the phone so that the signal was redirected. This is just one iCloud activation bypass.

If we talk about more modern methods, then just recently a bug appeared in iOS 10.1.1 that helps bypass iCloud blocking. With the help of Emoji, timeshift mode and screen rotation, the craftsmen managed to bypass the technology and completely unlock the device, starting its operation from the very beginning. The uniqueness of this method was that it was done without third-party applications, servers, or even a computer. For a while, absolutely anyone could do this and get a working phone, even if it was previously a brick or if a thief stole the phone and couldn’t unlock the device.

However, some time later, apple closed the “hole” in the system and now you can’t use emojis when logging into iCloud.

What to do, if The device has been hacked and a bypass is required

First of all, it’s worth saying that if the device is hacked, then most likely the extortionists are asking for money. They hacked your email, so you should try changing the password on it first. If you cannot log in, use the “forgot password” function and continue to follow the instructions. Not always, but if the attackers forgot or didn’t have time, then using this method you can bypass them and get your phone back.

If unsuccessful, we strongly recommend contacting Apple Support. They also work on the territory of the Russian Federation and, according to reviews from people who find themselves in a similar situation, they often help. How do they do it? Quite simple, because Apple employees have access to phones and all accounts. This is an administration that can correct the situation. Of course, they are unlikely to identify the scammers, but the phone will work again. Most likely, you will have to start working with it all over again, because this is a complete reboot of the system so that the scammers lose access. Therefore, we also recommend using a backup copy.

The backup is created on a computer, it doesn’t matter whether it’s Mac or Windows. There is also a chance to do it using the same iCloud, but this is more risky and restoring the system will be problematic.

One of the tips in such a situation is also that you need to change passwords on all accounts. On mail, VKontakte and other social networks and sites that are important to you. If attackers have taken over your iCloud, then it is quite possible that they are already selecting a similar password for your other accounts.


Also important advice here is one psychological factor: do not give money to extortionists. The person begins to panic, gives the thousand rubles that are asked from him, followed by a request for another, and so on. There is no guarantee that someone will actually unlock something, so you should immediately call the support service and explain the situation. Don’t panic, you will always have time to pay, but why, if there is another method that may bear fruit?

What should I do if, after purchasing an iPhone, another user’s data is entered there?

It often happens that a friend or store manager helps you set up the device for the first time. He enters his default data and after that the user has someone else’s information in the ACloud settings and people use the phone without access to the ACloud. There is also a risk of buying a device with such a setup right away through sales services. This once again proves that it is better to overpay than to give money for a “brick” or for a device that a stranger can track.

This is fraught with certain problems and threats that can strike at any moment:

  • An iPhone or iPad can be locked using iCloud Activation Lock.
  • All synchronized information (photos, contacts, notes, etc.) goes to someone else.
  • The same person is able to track the location using Find My iPhone. Nothing terrible, but unpleasant.
  • The iPhone can simply be formatted.

To correct the situation, you need to find the previous owner, only this will help you customize the phone for yourself and set up your account. The owner simply will not be able to log out of the old account in settings>iCloud Settings > iCloud. In this case, even the official Apple support service will not help. After all, this is the main meaning of the lock function. If the user does not know the password, then let him recover it by phone or via mail. If it can’t, then it means the phone is not for this user!

What to do if you bought or found a locked iPhone or iPad


If you managed to find the phone, then you should return it, because there is no chance of using it, and from a purely human point of view, it will be ethical and according to the rules. If you managed to buy a device at a cheap price, but it turns out that it is a “brick”, then you should take the following actions:

1

Most likely the phone you bought was stolen. The most logical action would be to try to find the previous owner. Law enforcement agencies can help do this. They should provide all the information about who you purchased the device from and hand the phone over to them. This is the best decision.

2

If you couldn’t find the owner and you didn’t hand over the smartphone to a law enforcement agency, then you can simply sell the phone for parts. This is quite profitable, especially if it is an iPad and its screen is sold.

3

Regularly surf the Internet for queries “bypass Apple iD unlinking from iCloud”, “bypass Activation Lock ", "bypass iCloud iPhone ". There are often videos on YouTube, where foreign or domestic bloggers explain how to bypass and deceive the apple company. Their methods only work for a while, because Apple regularly scans the network for such bypasses and closes the “holes”, correcting the situation. There is a chance to activate phone, but it is small. You might be lucky, you just have to wait for the next bug and take advantage of the moment, again, it’s up to you to decide.

Conclusion

There is only one result here: it is simply impossible to bypass Apple’s technology called iCloud Activation Lock. If the phone is already a “brick”, then this information is deep on Apple’s servers, which means that other than entering the password, it is unlikely that you will be able to use the device. There is still no program or software for a phone or computer that would be able to bypass the technology and allow you to use the phone.

Welcome! This time we have a new tool. iCloud Bypass Activation 2017 Tool is now available to hack all apple phones. Our hackers specifically call this hack tool as "iCloud activation bypass". As the team said, this popular hack tool works on the following apple devices.The first option is the best way to bypass iCloud & Apple Activation lock, & this is the way to remove iCloud using the trick exploits bug in this free software. It works for:

I'm from phone 4

I'm from phone 5

I'm from phone 6

I'm from phone 7

I'm from phone 7+

iPad air/mini


Proof of Possibility to Bypass iCloud:


iCloud Bypass Activation is a well-secure tool that we can use to remove iCloud lock on our devices without any malware or spam products. Currently this hack tool works on both Windows and Mac. iOS 8.0.2 iCloud Bypass is also now available.

Also, using iCloud Bypass Activation fixes all login issues and admin mode issues in iPad, iPad or iPod Touch devices. Don't pay money for cheters to download iCloud bypass HackTool as you can download it from our free download link above section for free.

How to use Bypass iOS ICloud activation Bypass lock on iPhone 5/6/7

1.Download iCloud activation Bypass.exe

2.Install the application

3.Join CD reading to your computer while entering DFU mood

4.Launch doulCi application and stay until identification

5.After the “activation lock bypass this process click or” bypass lock code’

6.Let iCloud Bypass Activation Do the Work

iPad Activation Lock protects the device from unauthorized access in case of theft or loss. However, this useful function in some cases can become an insurmountable obstacle for the legitimate owner of the tablet. To prevent the device from remaining in a “bricked” state, you need to know how to bypass the activation lock.

How Activation Lock works

Activation Lock on iPad appeared with the release of iOS 7. The function is enabled when setting up “Find My iPhone” and allows you to lock a device linked to an Apple ID. When the lock is enabled, you will have to enter your Apple ID password every time:

  1. turn off in settings;
  2. leaving;
  3. erasing information and reactivating.

Activation Lock essentially turns the iPad into a brick. If you forget your password or don’t know it, the device is completely blocked. You won’t be able to unlock the system on an iPad, even if you reflash it twice, nothing will change. When you reactivate, the system will require your Apple ID password, and if you do not enter it, the tablet will not turn on.

Apple has made such protection to protect users' personal data from unauthorized access, but the function can be dangerous for the rightful owner. If you don't remember your password, you won't be able to sign out of iCloud, turn off Find My iPhone, or activate your device after resetting settings and content, or reflashing it.

Unblocking

How to remove the block? There are two ways:

  1. Disable Find My iPhone in Settings.
  2. Unlink iPad from Apple ID.

In both cases, you need to know your Apple ID password, so it's a vicious circle. You cannot remove the lock if the function is activated, and you can only disable it if you know the password. But we constantly forget passwords, what should we do if a device we honestly bought is locked? Which bypass should I use? Maybe the blockage will be removed at the service center? Let's figure out what to do to get an unlocked iPad back.


Contacting a service center or calling support will definitely not help: specialists will immediately tell you that there is no way to regain access to a locked device except to find out/remember your Apple ID password.

Bypass blocking

If you can’t remove the blocking, we’ll try to bypass it. Security Research Labs employee Ben Schlabs wrote about a 100% working method. He has been quoted countless times, confirming that the method really works. You can't call it simple, but you can try. The conditions are as follows: you do not know either the lock code or the Apple ID with the password - nothing.

The instructions may well be used by attackers, but if you know the method, you can protect yourself from them if your iPad is lost or stolen.

Using the doulCi service

If you cannot get into the system interface because you discovered the activation lock only after resetting the settings, then you will have to use another method - bypass using the doulCi service. Open the hosts file on a computer with iTunes installed. Paste one of these lines into it:

Then connect your iPad to your computer in DFU mode.

When the device tries to connect to Apple's servers to verify activation, an entry in the hosts file will redirect it to the hacker's server. On doulCi servers, the activation request will be processed, after which the block will be removed, and you will be able to go to the iOS home screen.


This method cannot be used for iPhones and iPads with a SIM card, since after this bypass they will remain with the functionality of an iPod: they can listen to music and watch videos, but the devices will not connect to the mobile network. Nothing will happen to an iPad without GSM; it will work the same as it did before the blocking.

Another disadvantage is that the owners of doulCi servers receive information about the device, including other individual identifiers, as well as access to personal information. So before using this method, think carefully and clear your cloud storage of information that no one else should see.

Despite modern statistics, which state that the predominant number modern smartphones, used by users around the world, operates on Android OS, it is quite obvious that the more desirable gadget for most people is the iPhone. And users make their choice in favor of Android devices only because of the very reasonable cost characteristics that are set by the manufacturers of such gadgets.

This is why people very often look for ways to buy a used device that is locked or even stolen. But in the case of such operations, the probability of stumbling upon a blocked device is quite high.

What is an Apple ID activation request?

If you turned on any gadget from the world famous manufacturer Apple and found a request to enter data to activate the ID, this means that the device has been blocked.

As you know, the company takes the security of both its devices and user data directly, which can be stored in their memory, very seriously. It is for this purpose that a unique cloud security system was introduced. It not only allows you to store settings, contacts, calendars data in the cloud, synchronizing them with all your devices, but also block them in case of theft/loss of the gadget.

At one time, this was a real breakthrough in the field of security, making the iPhone, iPad and iPod devices that it became almost pointless to try to steal. If the device “leaves” the owner’s hands, he can quickly block it remotely, which will make it impossible to further use it, as well as use any information stored on it.

How to Bypass Apple ID Activation

To begin with, let's say that the blocking is on modern gadgets It’s simply impossible to get around Apple. This is a fact, and there is no need to look for any information on this matter on the Internet, because it doesn’t really exist. All attempts made by any users, experienced hackers, are in vain today.

iOS from Apple is

Cool!Sucks

It is not for nothing that the corporation invests huge amounts of money in enhancing the security of the devices it sells, protecting them and reducing the possibility of hacking not just to a minimum, but to absolute zero.

Even if some hacker suddenly manages to hack any of modern devices Apple, the most rational and profitable solution would be not to publish the instructions on the Internet, as millions of users would like, but to send it directly to the corporation’s specialists. This is because Apple treats such “craftsmen” very loyally, offering fairly substantial financial rewards for finding security vulnerabilities.

However, there is information that some users have successfully bypassed Apple ID activation on quite old devices – iPhone 4.

Instructions for bypassing activation for iPhone 4 owners

We offer you brief instructions, which can help you “unlock” a locked/lost/stolen phone:

All information is provided for informational purposes only and the site administration does not bear any responsibility for the application of the instructions below!
  1. Find and download the archive with the necessary “bypass.zip” files from the Internet. It can be found on the popular forum “4pda”, or on other similar services.
  2. Unzip the archive on your computer.
  3. Install Java from the official website if this software is not already installed on your PC.
  4. In the folder with the files unpacked from the archive, find the ssh.jar file and run it.
  5. When you see a message about entering the login “root” and password “alpine”, launch WinSCP.
  6. In WinSCP, write the following data (semicolons are not used):
  • Host name: 127.0.0.1;
  • Port Number: 2022;
  • Username: root;
  • Password: alpine.
  1. In the window that appears, click the black square symbol at the top.
  2. Enter the text mount.sh in the top line, wait for the corresponding three lines to appear, indicating the successful completion of the mount procedure.
  3. In the window on the left, open the unpacked archive, and on the right side, click on the dots until you get to the very root directory of the system.
  4. In the left window, open the bypass 3. folder (the version number of your device from the back roof, for example - 3.1).
  5. Move the mnt folders to the right window and replace "sources".
  6. Restart your iPhone while holding down the Power and Home keys.
  7. After turning on the smartphone in recovery mode, launch TunyUmbrella, in which select your device. Click "Exit Recovery".
  8. Set up an Apple device without Wi-Fi turned on and installed SIM card.

It is quite possible that this particular method will allow you to bypass Apple ID activation on iPhone. But, we repeat, this method is not 100% successful. In addition, there are cases when it had its fruits, and the device worked correctly, however, it did not allow the use of any SIM cards (regardless of the selected operator). Therefore, if you plan to purchase a used device, always check it for blocking, as you can buy a “pig in a poke.”

The feature of blocking devices using Apple ID appeared with the presentation of iOS7. The usefulness of this function is often questionable, since more often than not it is used not by the users of stolen (lost) devices themselves, but by scammers who trick the user into simply logging in under someone else’s Apple ID, and then remotely block the gadget.

It should be immediately clarified that blocking a device using an Apple ID is not performed on the device itself, but on Apple servers. From this we can conclude that not a single flashing of the device will allow you to regain access to it. But there are still ways that can help you unlock your device.

Method 1: Contact Apple technical support

This method should only be used in cases where the Apple device originally belonged to you and was not, for example, found on the street already locked. In this case, you must have on hand the box from the device, a sales receipt, information about the Apple ID with which the device was activated, as well as your identification document.


Method 2: Contact the person who blocked your device

If your device has been locked by a fraudster, then he will be the one who can unlock it. In this case, with a high degree of probability, a message will appear on the screen of your device demanding that you transfer a certain amount of money to a specified bank card or payment system.

The disadvantage of this method is that you follow the lead of scammers. Plus - you can get the opportunity to fully use your device again.

Please note that if your device is stolen and locked remotely, you should immediately contact Apple support as described in the first method. Contact this method only as a last resort if both Apple and law enforcement could not help you.

Method 3: Unblock Apple for security purposes

If your device has been locked by Apple, a message appears on the screen of your Apple device .

As a rule, such a problem occurs if attempts were made to authorize your account, as a result of which the password was entered incorrectly several times or incorrect answers to security questions were given.

As a result, Apple blocks access to the account in order to protect against fraudsters. The block can only be removed if you confirm that you belong to the account.

  1. When the message appears on the screen "Your Apple ID is blocked for security reasons", just below click on the button "Unlock account".
  2. You will be asked to choose one of two options: “Unblock using e-mail” or “Answer security questions”.
  3. If you have chosen confirmation via email, you will receive an incoming message with a verification code, which must be entered on the device. In the second case, you will be given two random control questions, to which you will need to give the correct answers.

As soon as verification is completed using one of the methods, the block will be successfully removed from your account.

Please note that if the lock was imposed for security purposes through no fault of your own, after regaining access to the device, be sure to change the password.