No matter what covers you use, no matter what cases you hide your smartphone in, sooner or later it will still become dirty. Dust particles clog the Lightning and 3.5 mm connectors, an unpleasant greasy layer appears around the perimeter of the Home button, and I’m not talking about fingerprints at all.

Owners of the iPhone 7 can rejoice that there is one less “hole” on the body of their smartphone, but the device makes full use of all other opportunities to get dirty.

Here are the simplest and effective ways Clean iPhone, iPad and iPod touch:

How to remove fingerprints

This type of pollution is the simplest. No cleaning required special means or objects. All you need is a small microfiber cloth.

The procedure is incredibly simple, just three times until the marks disappear. Do this often and your iPhone will look like new.

Where to find: such rags are included in the kit with protective glass or a film for a smartphone, they can be found in a case with glasses. Almost every home has a microfiber cloth for wiping monitors and TVs. You can buy it at any kiosk that sells phone accessories.

How to remove dirt

Simple friction is not enough here. You need to moisten the fabric. Almost any spray for cleaning glass or glossy surfaces is suitable for this.

Do not use solvents or ammonia solutions under any circumstances; a cleaner containing alcohol will do. This way, the dirt will quickly be wiped off and the remaining cleaner will evaporate instantly, and after that the iPhone will shine and sparkle. The main thing is not to be overzealous with the amount of liquid, wet only a microfiber cloth, and not the iPhone itself.

Where to find: Equipment care products are usually sold in large electronics and equipment stores.

How to make your own cleaning liquid

Cleaning liquid can be made at home. To do this, you need to mix ethyl alcohol and distilled water in equal proportions. If you find an empty spray bottle at home, it will be absolutely perfect.

Just moisten a microfiber cloth with this liquid and wipe your smartphone at least every day.

Where to find: ethyl alcohol is sold in every pharmacy, and distilled water is easiest to obtain using the refrigerator. Pour plain water into a mug, put it in the freezer and wait for half to freeze. Impurities freeze later, drain them and defrost the ice.

How to clean the Home button

Sometimes the key begins to crunch unpleasantly when activated or sticks a little (this does not apply to iPhone 7, there is no button there). In most cases, this is caused by dirt accumulated along the contour.

Where to find: Cotton swabs are sold in pharmacies and household chemical stores. You can simply wrap a little cotton wool around a match or toothpick.

How to clean connectors

If there is visible dirt in the connector, just try to remove the debris with a toothpick. Don't be overzealous or use excessive force.

Where to find: You can find toothpicks in any grocery store.

In any case, before cleaning your smartphone or tablet, read Apple's general recommendations.

Details Updated 01/31/2017 12:15 Published 08/07/2015 08:57 Author: nout-911

How to clean the Home button on iPhone and iPad yourself

Looking at the design of the models Apple phones you understand that the developers of these devices decided to make them laconic and at the same time stylish. Combined with the fact that the company has a lot of imitators in this market, they decided to simply abandon the physical buttons, completely replacing them with a touch screen.

But now not everyone is ready to switch to technology that does not contain buttons at all: volume control, camera shutter release, and most importantly Home button , all of them will be present on the devices of our time for a long time. This button allows the user to return to the main menu, but sometimes it may behave differently. This means that there is a malfunction in it that urgently needs to be eliminated. You can read many articles about how to clean the “Home” button on iPhone and iPad yourself, but we will tell you how to do it without harm to your device.

Home button refuses to work? - we offer three treatment options.

1. The first method is different in that you don’t have to go inside the device, because... All calibrations will be done using software. This option The good thing is that it has many satisfied users who have found it helpful.

Initially, we launch one of the standard applications for iOS: notes, clock, etc. When the application starts, do you need to hold down the Power button? which is located on the top end of your device. You must hold it until a dialog box appears prompting you to turn off your device. After this, release the pressed Power button and hold down the Home button for 10 seconds. After this time running application should be forced to quit.

This completes this method. It is quite difficult to verify its effectiveness, but according to many users, carrying out such a procedure with their device solves the problem. This method provides the simplest explanations to the question " How to clean the “Home” button on iPhone and iPad yourself?".

2. The second method will require you to clearly operate your hands. Prepare pure alcohol and cotton wool. The purpose of this operation will be to clean our Home button from all the dirt and dust that once got there. The sequence of actions is as follows:

Turn off your device;
- lightly saturate the cotton wool with pure alcohol;
- press the cotton wool against the button with great force so that some alcohol flows out of it;
- then briefly press the button for 1 minute so that the alcohol can seep under it;
- leave the device for 15 minutes to evaporate excess alcohol.

The cleaning operation is now complete. If there is no alcohol, then you can use WD-40, which can also collect dust and dirt. Well, if this method did not help, then there is a third method for you.

3. The third method is the safest, most effective, but naturally also the most expensive. Take your device to service center. There with ease will restore the functionality of the Home button.

4.5 Rating 4.50 Vote - support the service!

The iPhone's Home button has many functions - unlocking the screen, launching the multitasking menu, returning to main screen, calling Siri, etc. Such frequent use may affect the responsiveness of the button. Although the key is designed to last for a long period of use, it may become less responsive over time. Surprisingly, in most cases problems with the button are related to software, and not with the equipment itself.

In contact with

If the button "Home" is not as responsive as before, then here are some tips that can help fix the problem.

iPhone Home Button Stuck - Disable Shortcut Settings

It's no secret that the iPhone has a special section for people with disabilities. The functionality can be accessed by triple-clicking the Home button. This allows you to create a shortcut (for example, activate or ) without having to go to each time "Settings". Although this method saves a little time, button "Home" may become less responsive. If you triple-click the Home button, iPhone will wait a while after the first press to determine if you're about to do the next one. This results in a significant delay when pressing the button.

To disable the feature, open "Settings" -> "Basic" -> "Universal access" -> "Keyboard shortcut" and uncheck all the boxes.

The Home button on the iPhone is not working well - check the responsiveness of the Home button

You can adjust the speed required to double or triple press the button "Home". By default, it is installed on the smartphone maximum speed button response. It is possible that someone could accidentally change this value. To check your click speed, open "Settings", go to section "Basic" -> "Universal access" -> "Home". Then make sure your keystroke speed is set to "Default".

Calibrate the Home Button on iPhone

There is one interesting trick available in iOS with which you can calibrate a button "Home". It is not entirely clear why and how this works; most likely, this clears memory and closes applications that affect the operation of the processor. Here's how to calibrate the button "Home":

Open the program "Weather", "Stock" or any other pre-installed application.

1) Press and hold the Power button until the slider appears "Turn off".

2) Now press and hold the button "Home" for 8 seconds until the slider disappears.

This action should close the current application and restart it, after which the button "Home" should become more responsive.

Reboot your iPhone

A very simple method, but it may well help fix the delay problem. To restart your iPhone, hold the Power button until you see the slider "Turn off". Turn off your iPhone. Press the Power button again to turn on the device.

They often bring in devices that, in addition to mechanical and software problems, are literally clogged with dust and dirt. Smartphones of even the most attentive and responsible users cannot avoid a similar fate. But every problem has its own solution, so today I will talk about methods of dealing with such a problem. I’ll also show you how the service center specialists cope with this task.

This advice is not a call to action, but only shows Possible Solution Problems. However, a similar procedure can be done independently. But be careful!

Step 1

The first step is to clean the iPhone from grease, dust and dirt on the case itself. The surest and easiest way is to take a cotton swab or disk, blot the tool in alcohol and thoroughly wipe the device, superficially cleaning large particles of dust and dirt from visible areas: at the junction of the display and the case, near the camera eye, buttons and connectors.

Step 2

Next in line are hard-to-reach places: the internal space of the headphone and lightning (or 30-pin) jacks, speaker and microphone openings. In this case, you will need a very thin tool like a toothpick or a pointed match. The main thing is that it is not metal - there is a danger of damaging the contacts. But you also need to be careful with a wooden object, because you can break through the mesh of a speaker or microphone without much effort.

To clean the charging and 3.5 mm connectors, it is better to wrap a small piece of cotton wool around the end of a toothpick and again soak it in alcohol - this way the dust will stick to the instrument more, so it will be easier to remove dirt. In this way, you can clean the speaker and microphone holes on the iPhone 4/4s, but this trick will not work with newer models - the design of smartphones is different.

Step 3

A toothbrush is best for cleaning buttons and small holes. It will help get rid of any remaining dirt in the area of ​​the mode switch, Home and Power buttons, as well as in the connections between the case and the display.

Cleaning your iPhone from dust and dirt is not difficult, but it is quite painstaking. Of course, you can do external cleaning yourself, but in case of severe contamination that affects the performance of the gadget, it is better to contact a service center. The ones that suffer the most from dust and dirt are the charging connector and speaker- without timely intervention, modules may simply fail. Therefore, this will require the intervention of specialists.

And if you just need to clean your iPhone and let it charge normally again, we will be happy to help. And we won’t even take money.