Instructions for digital television set-top box cisco isb 7031. TV set-top box Cisco CIS2001. Instructions for setting up a universal remote control in PDF from Beeline

Beeline launched digital television back in 2009. The indisputable advantages of IPTV from Beeline include the fact that when connecting, a switch and even an STB set-top box are provided for rent. And the model range of such consoles is quite impressive. Conventionally, they can be divided into two groups, which differ in the presence hard drive.

The first group without railway includes:

  • Cisco – models CIS 2001 and ISB 2200;
  • Motorola – VIP 1002E and VIP 1200 models;
  • CA also Tatung STB2530.

To the second from the railway:

  • Cisco – CIS 430, ISB 7031, ISB 2230;
  • Motorola – VIP 1216, VIP 2262E;
  • Tatung STB3210.

An equally pleasant option from Beeline is the ability to watch TV programs through the Xbox 360 game console. The company uses the simplest switches – TRENDnet TE 100-S5 and D-Link DES-1005D.

So, what does a standard subscriber package look like? Equipment from Beeline upon delivery has the following appearance.

What do we see in the box

Note that in addition to the set-top box itself, the kit is full of cables and other equipment - there is even an HDMI cable! The switch from Trendnet is so compact that it easily fits into a box.

Well, and finally, a nice little thing. Where would we be without her? In the kit you will find a refrigerator magnet. Let us note that the Beeline company monitors its branding - it is present on literally every item, and the kit includes stickers.

The connection diagram itself is elementary simple: the cable brought to the house is connected into a switch, and from it the STB set-top box is connected directly, and, of course, your PC. Do you have a router with which you can programmatically allocate one port for an STB set-top box? Great - in this case, you can safely connect through the router. Otherwise, if the router does not connect to IPTV, you will have to connect it to the switch.

When you turn on the STB set-top box for the first time, the Beeline software will update itself and connect to the portal. Authorization of the set-top box on the portal is organized only at the link level - a rigid binding is used according to the so-called. MAC address. Once the connection is complete, the Microsoft Mediaroom screensaver will appear on your desktop. Yes, the company did not skimp in this regard - in general, in digital television today it is the most advanced and most expensive platform. They use it famous operators– AT&T, Deutsche Telekom Vodafone.

The interface is quite functional and convenient

A very convenient channel management has been created - now you can watch a TV program by scrolling through the list of channels one by one, pre-sorted by topic, or you can select your favorites. In the channel list you will find an online TV program that has a picture-in-picture option.

Maybe the main and only disadvantage is that the recorded video cannot be deleted from the set-top box, because... The recording is in encrypted form. You can record several programs at once. Recording occurs either at the touch of a button or according to a set schedule.

Unencrypted ones - there are only 9 of them - can also be watched through a computer on a VLC player. The remote control is programmable and can be used to control four devices. Oddly enough, you can even program key combinations - for example, sound control can be used on a TV or set-top box. The instructions are in English, but can also be found in Russian on the company’s official website.

An important flaw is that only one TV can be connected to each separate set-top box. Another disadvantage is the rather long loading time of the set-top box when turned on after a complete shutdown of the equipment.

In general, interactive television from Beeline is a fairly good investment. And this takes into account the fact that today the package is issued without rent, and savings with package offers are up to 30% of the amount subscription fee. You can see all the possibilities of IPTV from Beeline in the video below.

Specifications

How to connect

Characteristics

Motorola VIP1216 /VIP1200

Hard disk capacity - 120GB

3D support - yes

Video outputs:

RCA (tulips)

Power supply- Yes

Motorola VIP1200

Hard disk capacity - no

High definition television (HDTV) support - yes

3D support - yes

Video outputs:

RCA (tulips)

Return to consoles

Connecting the set-top box

You can connect the TV and computer yourself using the following

1. Connect the switch and set-top box to the electrical network.

2. Connect any port of the switch to the Internet line connected to the apartment

Beeline.

3. Connect Ethernet cables (patch cords) to any free ports of the switch

(included in the equipment package).

4. Connect one end of the patch cord to the computer, the other to the set-top box.

5. Connect the TV to the set-top box.

Connecting a Set-top Box to a Standard Definition TV (SDTV)

Before choosing the optimal connection method, you must familiarize yourself with all

input sockets that your TV is equipped with (see instruction manual

TV or the TV itself).

Connection options:

1. Connect the SCART connector of the TV set-top box to the RCA connector of the TV using a SCART - RCA cable,

which is included in the equipment package.

2. When connecting to a TV using an S-Video – S-Video or RCA – RCA cable. (“tulips”),

you will need to additionally connect the Optical output (S/PDIF) or the L- and R- AUDIO outputs

TV set-top boxes with the corresponding audio input of the TV or audio system.

Connecting a set-top box to a high-definition TV (HDTV) with an HDMI connector

HD image is much more detailed and realistic compared to

analog standard definition TV.

To watch a program in HDTV format, you must connect a set-top box to your TV

using an HDMI cable (not included).

Any other connection options (for example, via an RCA cable) will lead to a decrease in

HD signal quality to standard definition image quality. At the same time, the connection

via an HDMI cable will lead to an overall improvement in the image of all channels.

If your TV has a DVI input, you will need to separately purchase an adapter with

HDMI-DVI input connection DVI TV to the HDMI output of the set-top box. Adapter

HDMI-DVI does not provide audio signal transmission, so you will need additional

connect the Optical output (S/PDIF) or the L- and R-AUDIO outputs of the TV set-top box with the corresponding

TV audio input.

To improve image quality to HDTV level, it is necessary to

additional settings:

Press MENU on the remote control.

Select Settings - Format - Screen Settings - Aspect Ratio. Depending

from the maximum resolution that your TV supports, in the proposed

in the list, specify HDTV 720p (for HD Ready) or HDTV 1080i (Full HD) mode.__

Random joke:

Setting up a Beeline universal remote control

Detailed instructions for setting up Beeline universal remote controls with the Setup button. See simplified instructions on the main page

Beeline universal remote controls are configured by default for Motorola set-top boxes. But there are many other models and it’s not a fact that you will get exactly the Motorola. If they brought you another console ("Pussy" (Cisco) for example), you must first bind it to the remote control, otherwise nothing will work. A valiant beeline installer MUST configure the remote control, but, as practice shows, often he simply does not have enough time to do this (don’t blame the poor guy, they are already driven like dogs), or you decide to do everything yourself. It is for such cases that this article was written.

× Attention 1!

Follow the instructions carefully. If you thought too long and did not enter the code for 4 or more seconds, the remote control goes into normal standby mode. If you suddenly did something wrong, don’t worry, you just need to. More on this at the end of the article.

× Attention 2!

This article fully applies to the new Beeline universal remote control. It is easy to distinguish by appearance- the remote control is always black, as in the pictures above, with the Beeline logo and the " button" at the bottom SETUP"located at the top of the remote control under the button" MENU".
In extremely rare cases, you may encounter an outdated AT6400 model remote control without a " key SETUP", or MXv3 models with " key Learn" instead of " SETUP". The color of such a remote control can be either black or light. The connection of the remote control to the model is easy to determine - in the lower part of the remote control there is a logo" Beeline"the logo of the console will be located" Cisco"either" Motorola".
Remote controls in this series are tied only to their console and will not control another (i.e., a remote control with the Motorola logo will not work with the Kisko console and vice versa). But you can still set up such a remote control to control the on/off and volume of your TV. A detailed article about such remote controls is here:


× Addendum 2017

Since the new year (2017), Beeline began installing new generation set-top boxes - Jupiter. One of the advantages of this miracle is a huge terabyte screw, and one of the obvious disadvantages is that the firmware for them is still damp. Very. Plus, you only need your own remote control; a regular universal one will not work. Link below complete instructions for setting up these consoles:

Setting sequence:

Unlike its predecessors, the new Beeline universal remote control (with a setup button) is extremely simple and reliable to set up. If you strictly follow the instructions, setting up and linking such remote controls does not cause any difficulties. So let's get started:

Tied to pussy(Cisco):

  1. Turn on the TV! ;)
  2. Press and release the button STB.
  3. Press and hold the buttons AT THE SAME TIME SETUP And C, WAIT!
  4. When the button STB SETUP And C.
  5. We use it :)

Linking to Motorola(Motorola):

  1. Turn on the TV! ;)
  2. Press and release the button STB.
  3. Press and hold the buttons AT THE SAME TIME SETUP And B, WAIT!
  4. When the button STB blinks twice, release the buttons SETUP And B.
  5. Press the volume button (optional, just to check).
  6. We use it :)

We tie it to Tatung(Tatung):

  1. Turn on the TV! ;)
  2. Press and release the button STB.
  3. Press and hold the buttons AT THE SAME TIME SETUP And A, WAIT!
  4. When the button STB blinks twice, release the buttons SETUP And A.
  5. Press the volume button (optional, just to check).
  6. We use it :)

How to bind the volume control key to the TV:

  1. Turn on the TV!
  2. Point the remote control at the TV.
  3. Press the button SETUP, WAIT.
  4. When the button STB blinks twice, release SETUP.
  5. Press and release the button TV.
  6. Make sure the button TV blinked 2 times.
  7. Use it.

× Let me clarify to clear up any possible questions.
By default, the universal remote control controls the volume of the STB (when the key is active STB). The active key is very easy to determine; it flashes briefly when you press any button on the remote control. Now, after our movements, the remote control can also control the TV. But for this to happen, you need to activate the mode TV by clicking on TV. After adjusting the volume and other TV settings, you need to press again STB to return to the control mode of the Beeline set-top box.
This seems obvious, but very often people simply forget to switch modes TV/STB and are at a loss as to why the remote control doesn’t work :).


How to bind the volume control key to the Beeline set-top box:

By default, the volume key on the universal remote control is always tied to the set-top box, but just in case :-)

  1. Press the button SETUP, WAIT.
  2. When the button STB blinks twice, release SETUP.
  3. Press the volume up button.
  4. Press and release the button STB.
  5. Make sure the button STB blinked 2 times.
  6. Use it.

Automatically configure the remote control for full TV/DVD control:

If you want to not only control the volume of your TV or DVD set-top box, but also enter the native service menu using universal remote control, they need to be “introduced”, i.e. “link” the universal remote control to the TV or DVD. After this operation, the original TV remote control is, as a rule, not needed at all.

  1. Turn on the TV or DVD!
  2. Press and release the button TV for TV, DVD for DVD.
  3. Point the remote control at the TV or DVD.
  4. Press the button OK(in the center of the console), WAIT.
  5. Will be produced automatic search control codes for your device. During the entire process, keep the remote control within sight of the device! When the process is finished, the device (TV or DVD) will turn off.
  6. Release the button OK.
  7. Use it.

Manually setting up the remote control for full TV/DVD control:

There are two ways to bind the remote control - manual and automatic. I recommend using automatic - it’s easier and more reliable. If the automatic search does not produce results (which happens extremely rarely), you can use the code table. Look for your device in the table and enter the code (4 digits)

  1. Turn on the TV or other device - TV- TV, DVD- DVD set-top box, AUX- amplifiers, VCRs, etc.
  2. Point the remote control at the selected device.
  3. Press the button SETUP, WAIT.
  4. When the button of the selected device blinks twice, release SETUP.
  5. Enter the device code from the code table.
    6. We take the codes from the instructions here:
  6. If the code is successfully entered, the button of the device being configured will blink twice.

    7. If the code is not received within more than 4 seconds, the remote control will return to standby mode. In this case, repeat the procedure from point 2.

  7. Use it.

Reset to factory settings:

If something goes wrong, or you have gone too far with the settings, you can always reset the remote control to factory settings. But keep in mind that in this case, the universal remote control will by default be configured for the Motorola prefix. If your set-top box is a different model, you will need to reconfigure the remote control to it. So, reset:

  1. Press and release the button STB.
  2. Press the button SETUP, WAIT until it flashes 2 times, release the button SETUP.
  3. Press the buttons one by one 9, 7, 7 .
  4. Button STB will blink four times to indicate that the remote control has returned to default settings.

(To enlarge the image, move your mouse cursor over it)

Instructions for setting up a universal remote control in PDF from Beeline:

And finally, instructions for setting up the Beeline universal remote control in PDF from Beeline itself.

The company announced the expansion of the line of equipment produced in Russia. Not far from the city of Tver, in the area of ​​the village of Sadykovo, the production of TV set-top boxes has been opened on the basis of the global contract manufacturer Jabil, which will produce Cisco® digital set-top boxes designed for transmitting video content and new television services over IPTV networks. The production of IPTV set-top boxes includes the main processes: final assembly, several stages of testing and loading of client software; moreover, work is underway to increase the level of localization, including the release of IPTV set-top boxes.

The photographs show the assembly shop of the Jabil plant in the Tver region.

“Cisco is our main client, we manufacture this company’s products in various regions around the world and we are very pleased that Cisco has decided to localize the production of its equipment in Russia. By developing our production in Russia, our goal is to expand our production capabilities, in particular, to improve the manufacturability of production and launch a surface assembly line for boards. In addition, we intend to launch an additional equipment repair service. It is planned that we will be able to provide after-sales service and repair of equipment from the site in Tver throughout Russia,” says Philip Kostemal, General Director of Jabil LLC.

Pictured is Philip Costemal.

A pilot batch of Cisco set-top boxes - models ISB2230 with a hard drive and ISB2200 without a hard drive - was successfully tested in early September this year. Currently, conditions have been created for mass production of these products in Tver. The first large batch of Cisco set-top boxes will be released in October this year for the presenter Russian operator mobile communications– OJSC VimpelCom (Beeline brand).

"All viewers at home digital television“Beeline can watch HD content and have access to the most modern television services,” says Anatoly Smorgonsky, director of OJSC VimpelCom for marketing in the Moscow region. – The presence of many unique functions depends specifically on the subscriber equipment that we offer to users. We are confident that the new Cisco set-top boxes will allow us to continue to provide viewers with high-quality TV services that meet global standards.”

In the photo is Anatoly Smorgonsky.

Cisco digital set-top boxes produced in Russia can significantly expand the package of services provided by IP television providers in the local market, due to such functions as digital video recording, the ability to play a program after a pause, and individual delivery of television programs and videos (video on demand) to the subscriber. Cisco set-top boxes are equipped big amount additional interfaces such as component output, USB, HDMI, Ethernet, etc. Multimedia interface supports playback of audio formats High Quality and allows the transmission of high-definition digital video data.

Main characteristics of the set-top box:

    The IPTV set-top box has the most compact form factor in the entire line of similar products manufactured by Cisco (~ 23 x 15 x 5 cm).

    The device has a 2nd generation processor based on the Broadcom BCM7405/7406 processor. Overall CPU performance is ~1 billion instructions per second

    Certificate of compatibility with the Microsoft Mediaroom platform, hardware compatibility with other Linux-based platforms

    Available in versions with and without digital VM, fanless design with 2.5" HDD and E-SATA connector for future expansion (requires software support)

    Additional SCART/Non-SCART configurations for worldwide carrier deployments

    IPTV set-top boxes are easy integrates with third party access control and content distribution systems

“The priority task of Cisco Corporation in Russia is close cooperation with the Russian government and comprehensive support for the innovative development of the domestic economy,” said Pavel Betsis, head of Cisco business in the CIS and Georgia. “The expansion of the line of Cisco equipment manufactured in Russia confirms the company’s intention to promote the development of entrepreneurship and sustainable innovation in the country through the introduction of promising technologies, the creation of new jobs and the production of products in accordance with the legislation of the Russian Federation.”