Satellite receiver gi 7699 firmware. Firmware Galaxy-Innovations. Download Galaxy-Innovations firmware file
To configure sharing via the Ethernet port, the receiver must be connected network cable to a router or ADSL modem configured to automatically connect to the Internet. Also, the receiver must have firmware installed that supports cardsharing.
Initially, in the receiver you need to perform network settings Ethernet port. To do this, go to the menu, select the “Internet” item, then go to “Network settings” and press the “OK” button.
In the menu that opens, fill in the appropriate fields:
"DHCP" - if your router or ADSL modem is configured to automatically distribute network parameters to devices via a DHCP server, then it will be enough to select "On" at this point. and the receiver will automatically receive the necessary network settings. Otherwise, select "Off." and the network parameters below are set manually:
“IP Address” - assign the receiver an IP address from the rank of your network;
“Subnet mask” - indicate the subnet mask to use;
“Gateway” - indicate the IP address of the router or ADSL modem through which the receiver will access the Internet;
“Primary DNS” and “Alternative DNS” - we register the IP addresses of the Internet provider’s domain name servers;
"MAC Address" - this field displays MAC address network card receiver.
After entering the necessary parameters, press the "MENU" button to exit the network settings.
Then select the line “Net Client Config” in the “Internet” tab and click the “OK” button.
As a result, we find ourselves in the settings menu for cardsharing servers. The receiver supports entering parameters for up to eight different servers or eight ports of one cardsharing server. Using the left/right buttons, select the number of the server to be configured and press the yellow button to edit the server parameters.
In the menu that opens, specify the necessary data:
"Server Name" - enter Domain name server or its IP address. To enter, you need to press the "OK" button, after which the virtual keyboard. Then selecting the "<-", удаляем имеющийся IP адрес и вводим свой. После ввода выбираем кнопку "OK" и на пульте нажимаем кнопку "OK";
“IP” - we skip this line, it is not used;
“Port” - using the numeric buttons on the remote control, enter the server port; if you have a four-digit port, then the first digit must be specified - zero;
“Username” - enter the cardsharing server login using the virtual keyboard;
“Password” - enter the cardsharing server password using the virtual keyboard;
"DES Key" - using the numeric buttons on the remote control, enter the DES key used on the server;
“Active Server” - on this line, press the “OK” button on the remote control to activate the server parameters;
“EMM Yes” - if you want the receiver to send an EMM encrypted channel to the cardsharing server, then also activate this item;
"Emulator" - in this line we select the cardsharing protocol - "NewCamd". The receiver also additionally supports working with the following protocols: "HomeCamd", "HomeCamd2", "Cccamd", "Nasscamd".
Finally, press the “red” button to save the entered parameters of the cardsharing server. To ensure that the receiver's network card settings are correct and that the cardsharing server address is entered correctly, you can ping it. To do this, in the server settings menu, press the “blue” button and set the necessary ping parameters. It will be enough to select the server number for which the settings were entered in the “Ping Target”, go to the “Ping Run Ping” line and press the “OK” button on the remote control.
If everything is configured correctly, you will see the following picture.
Otherwise, you made a mistake somewhere in the settings, and you will see the message “Request timed out.”.
After correctly specifying the parameters of the cardsharing server, you can immediately begin viewing the channels included in the custom package.
Updating the software (firmware) of your equipment is carried out only in cases where any problems arise, or the update will add useful functions to the device. Flashing devices unnecessarily is not recommended, because... During the firmware update process, there is a possibility of equipment failure. If you are not sure that you can handle updating the firmware on your own, we recommend contacting the appropriate service center and qualified specialists.
Download Galaxy-Innovations firmware file:
Galaxy-Innovations Fly T2 receiver firmware file - . Alternative firmware and all information on the receiver can be found on.
Galaxy-Innovations Vu+ Solo SE receiver firmware file - firmware for this model is not provided on the official website;
Galaxy-Innovations GI Phoenix receiver firmware file - firmware for this model is not provided on the official website;
Galaxy-Innovations Matrix2 receiver firmware file - firmware for this model is not provided on the official website;
Galaxy-Innovations Avatar2+ receiver firmware file - firmware for this model is not provided on the official website;
Galaxy-Innovations Avatar3 receiver firmware file - firmware for this model is not provided on the official website;
Galaxy-Innovations Gi S9196m/ST9196m receiver firmware file - firmware for this model is not provided on the official website;
Galaxy-Innovations Gi T3513 receiver firmware file - firmware for this model is not provided on the official website;
Galaxy-Innovations Matrix Lite receiver firmware file - ;
Galaxy-Innovations Gi ST6699/ST7699 receiver firmware file - ;
Galaxy-Innovations Gi ST9196/ST9195 receiver firmware file - (version 21.66);
Operating instructions for Galaxy-Innovations digital receivers:
Galaxy-Innovations Gi ST9196/ST9195 User Manual - ;
Galaxy-Innovations Gi ST6699/ST7699 User Manual - ;
Galaxy-Innovations Matrix Lite User Manual - ;
Galaxy-Innovations Gi T3513 User Manual - ;
Galaxy-Innovations Gi S9196m/ST9196m User Manual - ;
Galaxy-Innovations Fly T2 User Manual - ;
Official website of the manufacturer:
You can check the availability of newer software on the manufacturer’s official website -
You can ask questions regarding galaxy-innovations brand swing equipment via the website galaxy-innovations.ru
Useful links:
In order to unzip the firmware file, you may need an archiver program. One of the most popular is the archiver.
Manufacturers:
You can add the latest software for your equipment by writing to us via .
Inexpensive combined HD receiver without Linux for receiving satellite (DVB-S/DVB-S2) and terrestrial (DVB-T) TV channels with the ability to replace tuners. Equipped with a USB port version 2.0 for recording programs and an Ethernet port for using advanced functions for viewing encoded channels. Also, unlike the GI ST 6699 (Galaxy Innovations ST 6699) model, it has a built-in RF modulator. The GI ST 7699 (Galaxy Innovations ST 7699) receiver is equipped with two digital tuners - the first is used to receive satellite channels in both standard SD and high definition HD from DVB-S and DVB-S2 transponders, the second supports digital terrestrial television in the DVB-T standard. Moreover, you can replace the tuners - with satellite, terrestrial or cable (additional tuners are not included in the delivery package). The receiver also supports recording one channel and viewing another channel within the same satellite transponder. You just need to take into account that if you decode closed channels using cardsharing, then the server will simply block you for simultaneously decoding two channels. Among other things, the use of the ALI 3602 processor in the device allows you to perform blind scanning of satellite channels without specifying the necessary transponder parameters; the receiver will determine them independently.
GI ST 7699 (Galaxy Innovations ST 7699) has two built-in card readers that work with almost many official access cards, for example - or. And if any problems arise with card support, you can use licensed CAM modules to ensure full compatibility, thanks to the presence of two CI slots. Moreover, the manufacturer claims full compatibility with Conax-encoded access cards used by the operator - .
GI ST 7699 (Galaxy Innovations ST 7699) equipped with USB port version 2.0, which allows you not only to record interesting programs on an external USB drive, but also to use the delayed viewing function - TimeShift. The receiver's Ethernet port can be used to update software and expand the functions of viewing encrypted channels, provided that the appropriate software is used and connected to specialized servers. What is cardsharing - you can read at the link provided. We are not involved in providing cardsharing or setting it up.
Receiver GI ST 7699 (Galaxy Innovations ST 7699) supports connection to almost any TV, thanks to the numerous connectors available: HDMI, YPbPr, SCART and RCA. Moreover, the first two are capable of transmitting video signals in formats - 576p, 720p and 1080i. The device also has a digital optical audio output - S/PDIF for connecting to a home theater and transmitting sound in Dolby Digital 5.1 format. In addition, you can connect a second TV using a coaxial cable, thanks to the presence of an RF modulator in the receiver.
If you need an inexpensive HDTV receiver with similar functionality and the use of a cheaper processor is not important to you, and you are looking for a device with an RF modulator, then GI ST 7699 (Galaxy Innovations ST 7699) - the receiver for you.